Cross-LLC is the same as cross-numa, which will cause longer
cache synchronization. This patch changes numa aware to LLC
aware and disables llc spinlock by default.
Signed-off-by: Mungerjiang <mungerjiang@tencent.com>
For AMD EPYC 7K83 64-Core Processor, enable erms/fsrm features to
improve memory copy performance. This is just for specific cpu and
when the features are not transmitted to guest by the host.
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Add support for a new version of the Load Store unit bank type as
indicated by its McaType value, which will be present in future SMCA
systems.
Add the new (HWID, MCATYPE) tuple. Reuse the same name, since this is
logically the same to the user.
Also, add the new error descriptions to edac_mce_amd.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200110015651.14887-2-Yazen.Ghannam@amd.com
commit 978e1342c3c4d7b20808fd5875d9ac0d57db22ee upstream.
Backport summary: for 5.4 kernel fsgsbase support.
Before enabling FSGSBASE the kernel could safely assume that the content
of GS base was a user address. Thus any speculative access as the result
of a mispredicted branch controlling the execution of SWAPGS would be to
a user address. So systems with speculation-proof SMAP did not need to
add additional LFENCE instructions to mitigate.
With FSGSBASE enabled a hostile user can set GS base to a kernel address.
So they can make the kernel speculatively access data they wish to leak
via a side channel. This means that SMAP provides no protection.
Add FSGSBASE as an additional condition to enable the fence-based SWAPGS
mitigation.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200528201402.1708239-9-sashal@kernel.org
(cherry picked from commit 978e1342c3c4d7b20808fd5875d9ac0d57db22ee)
Signed-off-by: Ethan Zhao <Haifeng.Zhao@intel.com>
commit 742c45c3ecc9255e15eddbbcee44fd8de401cf1c upstream.
Backport summary: for 5.4 kernel fsgsbase support.
The kernel needs to explicitly enable FSGSBASE. So, the application needs
to know if it can safely use these instructions. Just looking at the CPUID
bit is not enough because it may be running in a kernel that does not
enable the instructions.
One way for the application would be to just try and catch the SIGILL.
But that is difficult to do in libraries which may not want to overwrite
the signal handlers of the main application.
Enumerate the enabled FSGSBASE capability in bit 1 of AT_HWCAP2 in the ELF
aux vector. AT_HWCAP2 is already used by PPC for similar purposes.
The application can access it open coded or by using the getauxval()
function in newer versions of glibc.
[ tglx: Massaged changelog ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1557309753-24073-18-git-send-email-chang.seok.bae@intel.com
Link: https://lkml.kernel.org/r/20200528201402.1708239-14-sashal@kernel.org
(cherry picked from commit 742c45c3ecc9255e15eddbbcee44fd8de401cf1c)
Signed-off-by: Ethan Zhao <Haifeng.Zhao@intel.com>
commit dd649bd0b3aa012740059b1ba31ecad28a408f7f upstream.
Backport summary: for 5.4 kernel fsgsbase support.
This is temporary. It will allow the next few patches to be tested
incrementally.
Setting unsafe_fsgsbase is a root hole. Don't do it.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/1557309753-24073-4-git-send-email-chang.seok.bae@intel.com
Link: https://lkml.kernel.org/r/20200528201402.1708239-3-sashal@kernel.org
(cherry picked from commit dd649bd0b3aa012740059b1ba31ecad28a408f7f)
Signed-off-by: Ethan Zhao <Haifeng.Zhao@intel.com>
The kernel needs to explicitly enable FSGSBASE. So, the application needs
to know if it can safely use these instructions. Just looking at the CPUID
bit is not enough because it may be running in a kernel that does not
enable the instructions.
One way for the application would be to just try and catch the SIGILL.
But that is difficult to do in libraries which may not want to overwrite
the signal handlers of the main application.
Enumerate the enabled FSGSBASE capability in bit 1 of AT_HWCAP2 in the ELF
aux vector. AT_HWCAP2 is already used by PPC for similar purposes.
The application can access it open coded or by using the getauxval()
function in newer versions of glibc.
[ tglx: Massaged changelog ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1557309753-24073-18-git-send-email-chang.seok.bae@intel.com
Link: https://lkml.kernel.org/r/20200528201402.1708239-14-sashal@kernel.org
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Now that FSGSBASE is fully supported, remove unsafe_fsgsbase, enable
FSGSBASE by default, and add nofsgsbase to disable it.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1557309753-24073-17-git-send-email-chang.seok.bae@intel.com
Link: https://lkml.kernel.org/r/20200528201402.1708239-13-sashal@kernel.org
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Before enabling FSGSBASE the kernel could safely assume that the content
of GS base was a user address. Thus any speculative access as the result
of a mispredicted branch controlling the execution of SWAPGS would be to
a user address. So systems with speculation-proof SMAP did not need to
add additional LFENCE instructions to mitigate.
With FSGSBASE enabled a hostile user can set GS base to a kernel address.
So they can make the kernel speculatively access data they wish to leak
via a side channel. This means that SMAP provides no protection.
Add FSGSBASE as an additional condition to enable the fence-based SWAPGS
mitigation.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200528201402.1708239-9-sashal@kernel.org
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
This is temporary. It will allow the next few patches to be tested
incrementally.
Setting unsafe_fsgsbase is a root hole. Don't do it.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/1557309753-24073-4-git-send-email-chang.seok.bae@intel.com
Link: https://lkml.kernel.org/r/20200528201402.1708239-3-sashal@kernel.org
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
commit 2ade0d60939bcd54197c133b03b460fe62a4ec47 upstream
Backport summary: backport to kernel 5.4.49 for SGX Foundations support
This has been shown in tests:
[ +0.000008] WARNING: CPU: 3 PID: 7620 at kernel/rcu/srcutree.c:374 cleanup_srcu_struct+0xed/0x100
This is essentially a use-after free, although SRCU notices it as
an SRCU cleanup in an invalid context.
== Background ==
SGX has a data structure (struct sgx_encl_mm) which keeps per-mm SGX
metadata. This is separate from struct sgx_encl because, in theory,
an enclave can be mapped from more than one mm. sgx_encl_mm includes
a pointer back to the sgx_encl.
This means that sgx_encl must have a longer lifetime than all of the
sgx_encl_mm's that point to it. That's usually the case: sgx_encl_mm
is freed only after the mmu_notifier is unregistered in sgx_release().
However, there's a race. If the process is exiting,
sgx_mmu_notifier_release() can be called in parallel with sgx_release()
instead of being called *by* it. The mmu_notifier path keeps encl_mm
alive past when sgx_encl can be freed. This inverts the lifetime rules
and means that sgx_mmu_notifier_release() can access a freed sgx_encl.
== Fix ==
Increase encl->refcount when encl_mm->encl is established. Release
this reference when encl_mm is freed. This ensures that encl outlives
encl_mm.
[ bp: Massage commit message. ]
Fixes: 1728ab54b4be ("x86/sgx: Add a page reclaimer")
Reported-by: Haitao Huang <haitao.huang@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20210207221401.29933-1-jarkko@kernel.org
Signed-off-by: Fan Du <fan.du@intel.com>
commit dc9b7be557ca94301ea5c06c0d72307e642ffb18 upstream
Backport summary: backport to kernel 5.4.49 for SGX Foundations support
PTE insertion is fundamentally racy, and this check doesn't do anything
useful. Quoting Sean:
"Yeah, it can be whacked. The original, never-upstreamed code asserted
that the resolved PFN matched the PFN being installed by the fault
handler as a sanity check on the SGX driver's EPC management. The
WARN assertion got dropped for whatever reason, leaving that useless
chunk."
Jason stumbled over this as a new user of follow_pfn(), and I'm trying
to get rid of unsafe callers of that function so it can be locked down
further.
This is independent prep work for the referenced patch series:
https://lore.kernel.org/dri-devel/20201127164131.2244124-1-daniel.vetter@ffwll.ch/
Fixes: 947c6e11fa43 ("x86/sgx: Add ptrace() support for the SGX driver")
Reported-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/20210204184519.2809313-1-daniel.vetter@ffwll.ch
Signed-off-by: Fan Du <fan.du@intel.com>
commit 31bf92881714fe9962d43d097b5114a9b4ad0a12 upstream
Backport summary: backport to kernel 5.4.49 for SGX Foundations support
device_initcall() expects a function of type initcall_t, which returns
an integer. Change the signature of sgx_init() to match.
Fixes: e7e0545299d8c ("x86/sgx: Initialize metadata for Enclave Page Cache (EPC) sections")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/20210113232311.277302-1-samitolvanen@google.com
Signed-off-by: Fan Du <fan.du@intel.com>
Upstream commit id:
a4b9c48b96517ff4780b22a784e7537eac5dc21b
The sgx_enclave_add_pages.length field is documented as
* @length: length of the data (multiple of the page size)
Fail with -EINVAL, when the caller gives a zero length buffer of data
to be added as pages to an enclave. Right now 'ret' is returned as
uninitialized in that case.
[ bp: Flesh out commit message. ]
Fixes: c6d26d370767 ("x86/sgx: Add SGX_IOC_ENCLAVE_ADD_PAGES")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/linux-sgx/X8ehQssnslm194ld@mwanda/
Link: https://lkml.kernel.org/r/20201203183527.139317-1-jarkko@kernel.org
Upstream commit id:
afe76eca862ccde2a0c30105fc97a46a0b59339b
Fix
./arch/x86/kernel/cpu/sgx/ioctl.c:666: warning: Function parameter or member \
'encl' not described in 'sgx_ioc_enclave_provision'
./arch/x86/kernel/cpu/sgx/ioctl.c:666: warning: Excess function parameter \
'enclave' description in 'sgx_ioc_enclave_provision'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201123181922.0c009406@canb.auug.org.au
Upstream commit id:
14132a5b807bb5caf778fe7ae1597e630971e949
Return -ERESTARTSYS instead of -EINTR in sgx_ioc_enclave_add_pages()
when interrupted before any pages have been processed. At this point
ioctl can be obviously safely restarted.
Reported-by: Haitao Huang <haitao.huang@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201118213932.63341-1-jarkko@kernel.org
Upstream commit id:
67655b57f8f59467506463055d9a8398d2836377
Short Version:
The SGX section->laundry_list structure is effectively thread-local, but
declared next to some shared structures. Its semantics are clear as mud.
Fix that. No functional changes. Compile tested only.
Long Version:
The SGX hardware keeps per-page metadata. This can provide things like
permissions, integrity and replay protection. It also prevents things
like having an enclave page mapped multiple times or shared between
enclaves.
But, that presents a problem for kexec()'d kernels (or any other kernel
that does not run immediately after a hardware reset). This is because
the last kernel may have been rude and forgotten to reset pages, which
would trigger the "shared page" sanity check.
To fix this, the SGX code "launders" the pages by running the EREMOVE
instruction on all pages at boot. This is slow and can take a long
time, so it is performed off in the SGX-specific ksgxd instead of being
synchronous at boot. The init code hands the list of pages to launder in
a per-SGX-section list: ->laundry_list. The only code to touch this list
is the init code and ksgxd. This means that no locking is necessary for
->laundry_list.
However, a lock is required for section->page_list, which is accessed
while creating enclaves and by ksgxd. This lock (section->lock) is
acquired by ksgxd while also processing ->laundry_list. It is easy to
confuse the purpose of the locking as being for ->laundry_list and
->page_list.
Rename ->laundry_list to ->init_laundry_list to make it clear that this
is not normally used at runtime. Also add some comments clarifying the
locking, and reorganize 'sgx_epc_section' to put 'lock' near the things
it protects.
Note: init_laundry_list is 128 bytes of wasted space at runtime. It
could theoretically be dynamically allocated and then freed after
the laundering process. But it would take nearly 128 bytes of extra
instructions to do that.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201116222531.4834-1-dave.hansen@intel.com
Upstream commit id:
947c6e11fa4310b31c10016ae9816cdca3f1694e
Enclave memory is normally inaccessible from outside the enclave. This
makes enclaves hard to debug. However, enclaves can be put in a debug
mode when they are being built. In that mode, enclave data *can* be read
and/or written by using the ENCLS[EDBGRD] and ENCLS[EDBGWR] functions.
This is obviously only for debugging and destroys all the protections
present with normal enclaves. But, enclaves know their own debug status
and can adjust their behavior appropriately.
Add a vm_ops->access() implementation which can be used to read and write
memory inside debug enclaves. This is typically used via ptrace() APIs.
[ bp: Massage. ]
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Jethro Beekman <jethro@fortanix.com>
Link: https://lkml.kernel.org/r/20201112220135.165028-23-jarkko@kernel.org
Upstream commit id:
1728ab54b4be94aed89276eeb8e750a345659765
Just like normal RAM, there is a limited amount of enclave memory available
and overcommitting it is a very valuable tool to reduce resource use.
Introduce a simple reclaim mechanism for enclave pages.
In contrast to normal page reclaim, the kernel cannot directly access
enclave memory. To get around this, the SGX architecture provides a set of
functions to help. Among other things, these functions copy enclave memory
to and from normal memory, encrypting it and protecting its integrity in
the process.
Implement a page reclaimer by using these functions. Picks victim pages in
LRU fashion from all the enclaves running in the system. A new kernel
thread (ksgxswapd) reclaims pages in the background based on watermarks,
similar to normal kswapd.
All enclave pages can be reclaimed, architecturally. But, there are some
limits to this, such as the special SECS metadata page which must be
reclaimed last. The page version array (used to mitigate replaying old
reclaimed pages) is also architecturally reclaimable, but not yet
implemented. The end result is that the vast majority of enclave pages are
currently reclaimable.
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jethro Beekman <jethro@fortanix.com>
Link: https://lkml.kernel.org/r/20201112220135.165028-22-jarkko@kernel.org
Upstream commit id:
c82c61865024b9981f00358433bebed92ca20c00
The whole point of SGX is to create a hardware protected place to do
“stuff”. But, before someone is willing to hand over the keys to
the castle , an enclave must often prove that it is running on an
SGX-protected processor. Provisioning enclaves play a key role in
providing proof.
There are actually three different enclaves in play in order to make this
happen:
1. The application enclave. The familiar one we know and love that runs
the actual code that’s doing real work. There can be many of these on
a single system, or even in a single application.
2. The quoting enclave (QE). The QE is mentioned in lots of silly
whitepapers, but, for the purposes of kernel enabling, just pretend they
do not exist.
3. The provisioning enclave. There is typically only one of these
enclaves per system. Provisioning enclaves have access to a special
hardware key.
They can use this key to help to generate certificates which serve as
proof that enclaves are running on trusted SGX hardware. These
certificates can be passed around without revealing the special key.
Any user who can create a provisioning enclave can access the
processor-unique Provisioning Certificate Key which has privacy and
fingerprinting implications. Even if a user is permitted to create
normal application enclaves (via /dev/sgx_enclave), they should not be
able to create provisioning enclaves. That means a separate permissions
scheme is needed to control provisioning enclave privileges.
Implement a separate device file (/dev/sgx_provision) which allows
creating provisioning enclaves. This device will typically have more
strict permissions than the plain enclave device.
The actual device “driver” is an empty stub. Open file descriptors for
this device will represent a token which allows provisioning enclave duty.
This file descriptor can be passed around and ultimately given as an
argument to the /dev/sgx_enclave driver ioctl().
[ bp: Touchups. ]
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: linux-security-module@vger.kernel.org
Link: https://lkml.kernel.org/r/20201112220135.165028-16-jarkko@kernel.org
Upstream commit id:
9d0c151b41fed7b879030f4e533143d098781701
Enclaves have two basic states. They are either being built and are
malleable and can be modified by doing things like adding pages. Or, they
are locked down and not accepting changes. They can only be run after they
have been locked down. The ENCLS[EINIT] function induces the transition
from being malleable to locked-down.
Add an ioctl() that performs ENCLS[EINIT]. After this, new pages can no
longer be added with ENCLS[EADD]. This is also the time where the enclave
can be measured to verify its integrity.
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Jethro Beekman <jethro@fortanix.com>
Link: https://lkml.kernel.org/r/20201112220135.165028-15-jarkko@kernel.org
Upstream commit id:
c6d26d370767fa227fc44b98a8bdad112efdf563
SGX enclave pages are inaccessible to normal software. They must be
populated with data by copying from normal memory with the help of the EADD
and EEXTEND functions of the ENCLS instruction.
Add an ioctl() which performs EADD that adds new data to an enclave, and
optionally EEXTEND functions that hash the page contents and use the hash
as part of enclave “measurement” to ensure enclave integrity.
The enclave author gets to decide which pages will be included in the
enclave measurement with EEXTEND. Measurement is very slow and has
sometimes has very little value. For instance, an enclave _could_ measure
every page of data and code, but would be slow to initialize. Or, it might
just measure its code and then trust that code to initialize the bulk of
its data after it starts running.
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Jethro Beekman <jethro@fortanix.com>
Link: https://lkml.kernel.org/r/20201112220135.165028-14-jarkko@kernel.org
Upstream commit id:
888d249117876239593fe3039b6ead8ad6849035
Add an ioctl() that performs ECREATE function of ENCLS instruction, which
creates SGX Enclave Control Structure (SECS).
Although the SECS is an in-memory data structure, it is present in enclave
memory and is not directly accessible by software.
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Jethro Beekman <jethro@fortanix.com>
Link: https://lkml.kernel.org/r/20201112220135.165028-13-jarkko@kernel.org
Upstream commit id:
3fe0778edac8628637e2fd23835996523b1a3372
Intel(R) SGX is new hardware functionality that can be used by applications
to set aside private regions of code and data called enclaves. New hardware
protects enclave code and data from outside access and modification.
Add a driver that presents a device file and ioctl API to build and manage
enclaves. Subsequent patches will expend the ioctl()’s functionality.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Jethro Beekman <jethro@fortanix.com>
Link: https://lkml.kernel.org/r/20201112220135.165028-12-jarkko@kernel.org
Upstream commit id:
d2285493bef310b66b56dfe4eb75c1e2f431ea5c
Add functions for runtime allocation and free.
This allocator and its algorithms are as simple as it gets. They do a
linear search across all EPC sections and find the first free page. They
are not NUMA aware and only hand out individual pages. The SGX hardware
does not support large pages, so something more complicated like a buddy
allocator is unwarranted.
The free function (sgx_free_epc_page()) implicitly calls ENCLS[EREMOVE],
which returns the page to the uninitialized state. This ensures that the
page is ready for use at the next allocation.
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jethro Beekman <jethro@fortanix.com>
Link: https://lkml.kernel.org/r/20201112220135.165028-10-jarkko@kernel.org
Upstream commit id:
224ab3527f89f69ae57dc53555826667ac46a3cc
Kernel support for SGX is ultimately decided by the state of the launch
control bits in the feature control MSR (MSR_IA32_FEAT_CTL). If the
hardware supports SGX, but neglects to support flexible launch control, the
kernel will not enable SGX.
Enable SGX at feature control MSR initialization and update the associated
X86_FEATURE flags accordingly. Disable X86_FEATURE_SGX (and all
derivatives) if the kernel is not able to establish itself as the authority
over SGX Launch Control.
All checks are performed for each logical CPU (not just boot CPU) in order
to verify that MSR_IA32_FEATURE_CONTROL is correctly configured on all
CPUs. All SGX code in this series expects the same configuration from all
CPUs.
This differs from VMX where X86_FEATURE_VMX is intentionally cleared only
for the current CPU so that KVM can provide additional information if KVM
fails to load like which CPU doesn't support VMX. There’s not much the
kernel or an administrator can do to fix the situation, so SGX neglects to
convey additional details about these kinds of failures if they occur.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Co-developed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jethro Beekman <jethro@fortanix.com>
Link: https://lkml.kernel.org/r/20201112220135.165028-8-jarkko@kernel.org
Upstream commit id:
c9f400e4244841059395c8652ca2a347d6c169a6
Although carved out of normal DRAM, enclave memory is marked in the
system memory map as reserved and is not managed by the core mm. There
may be several regions spread across the system. Each contiguous region
is called an Enclave Page Cache (EPC) section. EPC sections are
enumerated via CPUID
Enclave pages can only be accessed when they are mapped as part of an
enclave, by a hardware thread running inside the enclave.
Parse CPUID data, create metadata for EPC pages and populate a simple
EPC page allocator. Although much smaller, ‘struct sgx_epc_page’
metadata is the SGX analog of the core mm ‘struct page’.
Similar to how the core mm’s page->flags encode zone and NUMA
information, embed the EPC section index to the first eight bits of
sgx_epc_page->desc. This allows a quick reverse lookup from EPC page to
EPC section. Existing client hardware supports only a single section,
while upcoming server hardware will support at most eight sections.
Thus, eight bits should be enough for long term needs.
Acked-by: Jethro Beekman <jethro@fortanix.com> # v40
Co-developed-by: Serge Ayoun <serge.ayoun@intel.com>
Signed-off-by: Serge Ayoun <serge.ayoun@intel.com>
Co-developed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Upstream commit id:
1db2a6e1e29ff994443a9eef7cf3d26104c777a7
Opportunistically initialize IA32_FEAT_CTL to enable VMX when the MSR is
left unlocked by BIOS. Configuring feature control at boot time paves
the way for similar enabling of other features, e.g. Software Guard
Extensions (SGX).
Temporarily leave equivalent KVM code in place in order to avoid
introducing a regression on Centaur and Zhaoxin CPUs, e.g. removing
KVM's code would leave the MSR unlocked on those CPUs and would break
existing functionality if people are loading kvm_intel on Centaur and/or
Zhaoxin. Defer enablement of the boot-time configuration on Centaur and
Zhaoxin to future patches to aid bisection.
Note, Local Machine Check Exceptions (LMCE) are also supported by the
kernel and enabled via feature control, but the kernel currently uses
LMCE if and only if the feature is explicitly enabled by BIOS. Keep
the current behavior to avoid introducing bugs, future patches can opt
in to opportunistic enabling if it's deemed desirable to do so.
Always lock IA32_FEAT_CTL if it exists, even if the CPU doesn't support
VMX, so that other existing and future kernel code that queries the MSR
can assume it's locked.
Start from a clean slate when constructing the value to write to
IA32_FEAT_CTL, i.e. ignore whatever value BIOS left in the MSR so as not
to enable random features or fault on the WRMSR.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-5-sean.j.christopherson@intel.com
Upstream commit id:
e2a158713d0d39ec2235336b5fb1324236f83cbf
ENCLS is the userspace instruction which wraps virtually all
unprivileged SGX functionality for managing enclaves. It is essentially
the ioctl() of instructions with each function implementing different
SGX-related functionality.
Add macros to wrap the ENCLS functionality. There are two main groups,
one for functions which do not return error codes and a “ret_” set for
those that do.
ENCLS functions are documented in Intel SDM section 36.6.
Acked-by: Jethro Beekman <jethro@fortanix.com> # v40
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>x86/sgx: Add wrappers for ENCLS functions
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
ENCLS is the userspace instruction which wraps virtually all
unprivileged SGX functionality for managing enclaves. It is essentially
the ioctl() of instructions with each function implementing different
SGX-related functionality.
Add macros to wrap the ENCLS functionality. There are two main groups,
one for functions which do not return error codes and a “ret_” set for
those that do.
ENCLS functions are documented in Intel SDM section 36.6.
Acked-by: Jethro Beekman <jethro@fortanix.com> # v40
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Upstream commit id:
db51159e9b44da372814c73edf2233e24d75f90a
Define the SGX architectural data structures used by various SGX
functions. This is not an exhaustive representation of all SGX data
structures but only those needed by the kernel.
The goal is to sequester hardware structures in "sgx/arch.h" and keep
them separate from kernel-internal or uapi structures.
The data structures are described in Intel SDM section 37.6.
Acked-by: Jethro Beekman <jethro@fortanix.com> # v40
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
[ Upstream commit 7189b3c11903667808029ec9766a6e96de5012a5 ]
Currently, the late microcode loading mechanism checks whether any CPUs
are offlined, and, in such a case, aborts the load attempt.
However, this must be done before the kernel caches new microcode from
the filesystem. Otherwise, when offlined CPUs are onlined later, those
cores are going to be updated through the CPU hotplug notifier callback
with the new microcode, while CPUs previously onine will continue to run
with the older microcode.
For example:
Turn off one core (2 threads):
echo 0 > /sys/devices/system/cpu/cpu3/online
echo 0 > /sys/devices/system/cpu/cpu1/online
Install the ucode fails because a primary SMT thread is offline:
cp intel-ucode/06-8e-09 /lib/firmware/intel-ucode/
echo 1 > /sys/devices/system/cpu/microcode/reload
bash: echo: write error: Invalid argument
Turn the core back on
echo 1 > /sys/devices/system/cpu/cpu3/online
echo 1 > /sys/devices/system/cpu/cpu1/online
cat /proc/cpuinfo |grep microcode
microcode : 0x30
microcode : 0xde
microcode : 0x30
microcode : 0xde
The rationale for why the update is aborted when at least one primary
thread is offline is because even if that thread is soft-offlined
and idle, it will still have to participate in broadcasted MCE's
synchronization dance or enter SMM, and in both examples it will execute
instructions so it better have the same microcode revision as the other
cores.
[ bp: Heavily edit and extend commit message with the reasoning behind all
this. ]
Fixes: 30ec26da9967 ("x86/microcode: Do not upload microcode if CPUs are offline")
Signed-off-by: Otavio Pontes <otavio.pontes@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/20210319165515.9240-2-otavio.pontes@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b6b4fbd90b155a0025223df2c137af8a701d53b3 upstream.
Initialize MSR_TSC_AUX with CPU node information if RDTSCP or RDPID is
supported. This fixes a bug where vdso_read_cpunode() will read garbage
via RDPID if RDPID is supported but RDTSCP is not. While no known CPU
supports RDPID but not RDTSCP, both Intel's SDM and AMD's APM allow for
RDPID to exist without RDTSCP, e.g. it's technically a legal CPU model
for a virtual machine.
Note, technically MSR_TSC_AUX could be initialized if and only if RDPID
is supported since RDTSCP is currently not used to retrieve the CPU node.
But, the cost of the superfluous WRMSR is negigible, whereas leaving
MSR_TSC_AUX uninitialized is just asking for future breakage if someone
decides to utilize RDTSCP.
Fixes: a582c540ac1b ("x86/vdso: Use RDPID in preference to LSL when available")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210504225632.1532621-2-seanjc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 300638101329e8f1569115f3d7197ef5ef754a3a upstream
Backport summary: Backport to kernel 5.4.49 to enhance MCA-R for copyin
All instructions copying data between kernel and user memory
are tagged with either _ASM_EXTABLE_UA or _ASM_EXTABLE_CPY
entries in the exception table. ex_fault_handler_type() returns
EX_HANDLER_UACCESS for both of these.
Recovery is only possible when the machine check was triggered
on a read from user memory. In this case the same strategy for
recovery applies as if the user had made the access in ring3. If
the fault was in kernel memory while copying to user there is no
current recovery plan.
For MOV and MOVZ instructions a full decode of the instruction
is done to find the source address. For MOVS instructions
the source address is in the %rsi register. The function
fault_in_kernel_space() determines whether the source address is
kernel or user, upgrade it from "static" so it can be used here.
Co-developed-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201006210910.21062-7-tony.luck@intel.com
Signed-off-by: Youquan Song <youquan.song@intel.com>
commit c0ab7ffce275d3f83bd253c70889c28821d4a41d upstream
Backport summary: Backport to kernel 5.4.49 to enhance MCA-R for copyin
Existing kernel code can only recover from a machine check on code that
is tagged in the exception table with a fault handling recovery path.
Add two new fields in the task structure to pass information from
machine check handler to the "task_work" that is queued to run before
the task returns to user mode:
+ mce_vaddr: will be initialized to the user virtual address of the fault
in the case where the fault occurred in the kernel copying data from
a user address. This is so that kill_me_maybe() can provide that
information to the user SIGBUS handler.
+ mce_kflags: copy of the struct mce.kflags needed by kill_me_maybe()
to determine if mce_vaddr is applicable to this error.
Add code to recover from a machine check while copying data from user
space to the kernel. Action for this case is the same as if the user
touched the poison directly; unmap the page and send a SIGBUS to the task.
Use a new helper function to share common code between the "fault
in user mode" case and the "fault while copying from user" case.
New code paths will be activated by the next patch which sets
MCE_IN_KERNEL_COPYIN.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201006210910.21062-6-tony.luck@intel.com
Signed-off-by: Youquan Song <youquan.song@intel.com>
commit a05d54c41ecfa1a322b229b4e5ce50c157284f74 upstream
Backport summary: Backport to kernel 5.4.49 to enhance MCA-R for copyin
Avoid a proliferation of ex_has_*_handler() functions by having just
one function that returns the type of the handler (if any).
Drop the __visible attribute for this function. It is not called
from assembler so the attribute is not necessary.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201006210910.21062-3-tony.luck@intel.com
Signed-off-by: Youquan Song <youquan.song@intel.com>
commit 41ce0564bfe2e129d56730418d8c0a9f9f2d31b5 upstream
Backport summary: Backport to kernel 5.4.49 to enhance MCA-R for copyin
New recovery features require additional information about processor
state when a machine check occurred. Pass pt_regs down to the routines
that need it.
No functional change.
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201006210910.21062-2-tony.luck@intel.com
Signed-off-by: Youquan Song <youquan.song@intel.com>
commit 13c877f4b48b943105ad9e13ba2c7a093fb694e8 upstream
Backport summary: Backport to kernel 5.4.49 to enhance MCA-R for copyin
Back in commit:
20d51a426fe9 ("x86/mce: Reuse one of the u16 padding fields in 'struct mce'")
a field was added to "struct mce" to save the computed error severity.
Make use of this in mce_reign() to avoid re-computing the severity
for every CPU.
In the case where the machine panics, one call to mce_severity() is
still needed in order to provide the correct message giving the reason
for the panic.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200908175519.14223-2-tony.luck@intel.com
Signed-off-by: Youquan Song <youquan.song@intel.com>
commit 0d00449c7a28a1514595630735df383dec606812 upstream
Backport summary: Backport to kernel 5.4.49 to enhance MCA-R for copyin
A few exceptions (like #DB and #BP) can happen at any location in the code,
this then means that tracers should treat events from these exceptions as
NMI-like. The interrupted context could be holding locks with interrupts
disabled for instance.
Similarly, #MC is an actual NMI-like exception.
All of them use ist_enter() which only concerns itself with RCU, but does
not do any of the other setup that NMIs need. This means things like:
printk()
raw_spin_lock_irq(&logbuf_lock);
<#DB/#BP/#MC>
printk()
raw_spin_lock_irq(&logbuf_lock);
are entirely possible (well, not really since printk tries hard to
play nice, but the concept stands).
So replace ist_enter() with nmi_enter(). Also observe that any nmi_enter()
caller must be both notrace and NOKPROBE, or in the noinstr text section.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://lkml.kernel.org/r/20200505134101.525508608@linutronix.de
Signed-off-by: Youquan Song <youquan.song@intel.com>
commit 5567d11c21a1d508a91a8cb64a819783a0835d9f upstream
Backport summary: Backport to kernel 5.4.49 to enhance MCA-R for copyin
Convert #MC over to using task_work_add(); it will run the same code
slightly later, on the return to user path of the same exception.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://lkml.kernel.org/r/20200505134100.957390899@linutronix.de
Signed-off-by: Youquan Song <youquan.song@intel.com>
commit b052df3da821adfd6be26a6eb16624fb50e90e56 upstream
Backport summary: Backport to kernel 5.4.49 to enhance MCA-R for copyin
This is completely overengineered and definitely not an interface which
should be made available to anything else than this particular MCE case.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134059.462640294@linutronix.de
Signed-off-by: Youquan Song <youquan.song@intel.com>
commit 1df73b2131e3b33d518609769636b41ce00212de upstream
Backport summary: Backport to kernel 5.4.49 to enhance MCA-R
the severity grading code returns in_kernel_recov error context for
errors which have happened in kernel space but from which the kernel can
recover. whether the recovery can happen is determined by the exception
table entry having as handler ex_handler_fault() and which has been
declared at build time using _asm_extable_fault().
in_kernel_recov is used in mce_severity_intel() to lookup the
corresponding error severity in the severities table.
however, the mapping back from error severity to whether the error is
in_kernel_recov is ambiguous and in the very paranoid case - which
might not be possible right now - but be better safe than sorry later,
an exception fixup could be attempted for another mce whose address
is in the exception table and has the proper severity. which would be
unfortunate, to say the least.
therefore, mark such mces explicitly as mce_in_kernel_recov so that the
recovery attempt is done only for them.
document the whole handling, while at it, as it is not trivial.
reported-by: thomas gleixner <tglx@linutronix.de>
signed-off-by: borislav petkov <bp@suse.de>
tested-by: tony luck <tony.luck@intel.com>
link: https://lkml.kernel.org/r/20200407163414.18058-10-bp@alien8.de
Signed-off-by: Youquan Song <youquan.song@intel.com>
commit 43505646941bee217b91d064756975aa1ab6ee3b upstream
Backport summary: Backport to kernel 5.4.49 to enhance MCA-R
Sometimes, when logs are getting lost, it's nice to just
have everything dumped to the serial console.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200214222720.13168-7-tony.luck@intel.com
Signed-off-by: Youquan Song <youquan.song@intel.com>
Mungerjiang