forked from TencentOS/TencentOS-kernel
99 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Daniel Borkmann
|
a78a89b250 |
bpf: Allow for map-in-map with dynamic inner array map entries
Recent work in f4d05259213f ("bpf: Add map_meta_equal map ops") and 134fede4eecf
("bpf: Relax max_entries check for most of the inner map types") added support
for dynamic inner max elements for most map-in-map types. Exceptions were maps
like array or prog array where the map_gen_lookup() callback uses the maps'
max_entries field as a constant when emitting instructions.
We recently implemented Maglev consistent hashing into Cilium's load balancer
which uses map-in-map with an outer map being hash and inner being array holding
the Maglev backend table for each service. This has been designed this way in
order to reduce overall memory consumption given the outer hash map allows to
avoid preallocating a large, flat memory area for all services. Also, the
number of service mappings is not always known a-priori.
The use case for dynamic inner array map entries is to further reduce memory
overhead, for example, some services might just have a small number of back
ends while others could have a large number. Right now the Maglev backend table
for small and large number of backends would need to have the same inner array
map entries which adds a lot of unneeded overhead.
Dynamic inner array map entries can be realized by avoiding the inlined code
generation for their lookup. The lookup will still be efficient since it will
be calling into array_map_lookup_elem() directly and thus avoiding retpoline.
The patch adds a BPF_F_INNER_MAP flag to map creation which therefore skips
inline code generation and relaxes array_map_meta_equal() check to ignore both
maps' max_entries. This also still allows to have faster lookups for map-in-map
when BPF_F_INNER_MAP is not specified and hence dynamic max_entries not needed.
Example code generation where inner map is dynamic sized array:
# bpftool p d x i 125
int handle__sys_enter(void * ctx):
; int handle__sys_enter(void *ctx)
0: (b4) w1 = 0
; int key = 0;
1: (63) *(u32 *)(r10 -4) = r1
2: (bf) r2 = r10
;
3: (07) r2 += -4
; inner_map = bpf_map_lookup_elem(&outer_arr_dyn, &key);
4: (18) r1 = map[id:468]
6: (07) r1 += 272
7: (61) r0 = *(u32 *)(r2 +0)
8: (35) if r0 >= 0x3 goto pc+5
9: (67) r0 <<= 3
10: (0f) r0 += r1
11: (79) r0 = *(u64 *)(r0 +0)
12: (15) if r0 == 0x0 goto pc+1
13: (05) goto pc+1
14: (b7) r0 = 0
15: (b4) w6 = -1
; if (!inner_map)
16: (15) if r0 == 0x0 goto pc+6
17: (bf) r2 = r10
;
18: (07) r2 += -4
; val = bpf_map_lookup_elem(inner_map, &key);
19: (bf) r1 = r0 | No inlining but instead
20: (85) call array_map_lookup_elem#149280 | call to array_map_lookup_elem()
; return val ? *val : -1; | for inner array lookup.
21: (15) if r0 == 0x0 goto pc+1
; return val ? *val : -1;
22: (61) r6 = *(u32 *)(r0 +0)
; }
23: (bc) w0 = w6
24: (95) exit
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201010234006.7075-4-daniel@iogearbox.net
|
|
|
Daniel Borkmann
|
3c899fa7ce |
bpf: Add redirect_peer helper
Add an efficient ingress to ingress netns switch that can be used out of tc BPF
programs in order to redirect traffic from host ns ingress into a container
veth device ingress without having to go via CPU backlog queue [0]. For local
containers this can also be utilized and path via CPU backlog queue only needs
to be taken once, not twice. On a high level this borrows from ipvlan which does
similar switch in __netif_receive_skb_core() and then iterates via another_round.
This helps to reduce latency for mentioned use cases.
Pod to remote pod with redirect(), TCP_RR [1]:
# percpu_netperf 10.217.1.33
RT_LATENCY: 122.450 (per CPU: 122.666 122.401 122.333 122.401 )
MEAN_LATENCY: 121.210 (per CPU: 121.100 121.260 121.320 121.160 )
STDDEV_LATENCY: 120.040 (per CPU: 119.420 119.910 125.460 115.370 )
MIN_LATENCY: 46.500 (per CPU: 47.000 47.000 47.000 45.000 )
P50_LATENCY: 118.500 (per CPU: 118.000 119.000 118.000 119.000 )
P90_LATENCY: 127.500 (per CPU: 127.000 128.000 127.000 128.000 )
P99_LATENCY: 130.750 (per CPU: 131.000 131.000 129.000 132.000 )
TRANSACTION_RATE: 32666.400 (per CPU: 8152.200 8169.842 8174.439 8169.897 )
Pod to remote pod with redirect_peer(), TCP_RR:
# percpu_netperf 10.217.1.33
RT_LATENCY: 44.449 (per CPU: 43.767 43.127 45.279 45.622 )
MEAN_LATENCY: 45.065 (per CPU: 44.030 45.530 45.190 45.510 )
STDDEV_LATENCY: 84.823 (per CPU: 66.770 97.290 84.380 90.850 )
MIN_LATENCY: 33.500 (per CPU: 33.000 33.000 34.000 34.000 )
P50_LATENCY: 43.250 (per CPU: 43.000 43.000 43.000 44.000 )
P90_LATENCY: 46.750 (per CPU: 46.000 47.000 47.000 47.000 )
P99_LATENCY: 52.750 (per CPU: 51.000 54.000 53.000 53.000 )
TRANSACTION_RATE: 90039.500 (per CPU: 22848.186 23187.089 22085.077 21919.130 )
[0] https://linuxplumbersconf.org/event/7/contributions/674/attachments/568/1002/plumbers_2020_cilium_load_balancer.pdf
[1] https://github.com/borkmann/netperf_scripts/blob/master/percpu_netperf
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201010234006.7075-3-daniel@iogearbox.net
|
|
|
Toke Høiland-Jørgensen
|
7a780dbc6f |
bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
[upstream commit ba452c9e996d8a4c347b32805f91abb70de5de7e] Based on the discussion in [0], update the bpf_redirect_neigh() helper to accept an optional parameter specifying the nexthop information. This makes it possible to combine bpf_fib_lookup() and bpf_redirect_neigh() without incurring a duplicate FIB lookup - since the FIB lookup helper will return the nexthop information even if no neighbour is present, this can simply be passed on to bpf_redirect_neigh() if bpf_fib_lookup() returns BPF_FIB_LKUP_RET_NO_NEIGH. Thus fix & extend it before helper API is frozen. [0] https://lore.kernel.org/bpf/393e17fc-d187-3a8d-2f0d-a627c7c63fca@iogearbox.net/ Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/bpf/160322915615.32199.1187570224032024535.stgit@toke.dk |
|
|
Stanislav Fomichev
|
8092578483 |
bpf: Allow any port in bpf_bind helper
[upstream commit 8086fbaf49345f988deec539ec8e182b02914401]
We want to have a tighter control on what ports we bind to in
the BPF_CGROUP_INET{4,6}_CONNECT hooks even if it means
connect() becomes slightly more expensive. The expensive part
comes from the fact that we now need to call inet_csk_get_port()
that verifies that the port is not used and allocates an entry
in the hash table for it.
Since we can't rely on "snum || !bind_address_no_port" to prevent
us from calling POST_BIND hook anymore, let's add another bind flag
to indicate that the call site is BPF program.
v5:
* fix wrong AF_INET (should be AF_INET6) in the bpf program for v6
v3:
* More bpf_bind documentation refinements (Martin KaFai Lau)
* Add UDP tests as well (Martin KaFai Lau)
* Don't start the thread, just do socket+bind+listen (Martin KaFai Lau)
v2:
* Update documentation (Andrey Ignatov)
* Pass BIND_FORCE_ADDRESS_NO_PORT conditionally (Andrey Ignatov)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200508174611.228805-5-sdf@google.com
|
|
|
Daniel Borkmann
|
4729964bea |
bpf: Add redirect_neigh helper as redirect drop-in
[upstream commit b4ab31414970a7a03a5d55d75083f2c101a30592]
Add a redirect_neigh() helper as redirect() drop-in replacement
for the xmit side. Main idea for the helper is to be very similar
in semantics to the latter just that the skb gets injected into
the neighboring subsystem in order to let the stack do the work
it knows best anyway to populate the L2 addresses of the packet
and then hand over to dev_queue_xmit() as redirect() does.
This solves two bigger items: i) skbs don't need to go up to the
stack on the host facing veth ingress side for traffic egressing
the container to achieve the same for populating L2 which also
has the huge advantage that ii) the skb->sk won't get orphaned in
ip_rcv_core() when entering the IP routing layer on the host stack.
Given that skb->sk neither gets orphaned when crossing the netns
as per 9c4c325252c5 ("skbuff: preserve sock reference when scrubbing
the skb.") the helper can then push the skbs directly to the phys
device where FQ scheduler can do its work and TCP stack gets proper
backpressure given we hold on to skb->sk as long as skb is still
residing in queues.
With the helper used in BPF data path to then push the skb to the
phys device, I observed a stable/consistent TCP_STREAM improvement
on veth devices for traffic going container -> host -> host ->
container from ~10Gbps to ~15Gbps for a single stream in my test
environment.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/bpf/f207de81629e1724899b73b8112e0013be782d35.1601477936.git.daniel@iogearbox.net
|
|
|
Daniel Borkmann
|
65d07b0f86 |
bpf: Add classid helper only based on skb->sk
[upstream commit b426ce83baa7dff947fb354118d3133f2953aac8]
Similarly to 5a52ae4e32a6 ("bpf: Allow to retrieve cgroup v1 classid
from v2 hooks"), add a helper to retrieve cgroup v1 classid solely
based on the skb->sk, so it can be used as key as part of BPF map
lookups out of tc from host ns, in particular given the skb->sk is
retained these days when crossing net ns thanks to 9c4c325252c5
("skbuff: preserve sock reference when scrubbing the skb."). This
is similar to bpf_skb_cgroup_id() which implements the same for v2.
Kubernetes ecosystem is still operating on v1 however, hence net_cls
needs to be used there until this can be dropped in with the v2
helper of bpf_skb_cgroup_id().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/ed633cf27a1c620e901c5aa99ebdefb028dce600.1601477936.git.daniel@iogearbox.net
|
|
|
Menglong Dong
|
870241ed41 |
bpf: fix selftest case compile error for bpf_timer
Signed-off-by: Menglong Dong <imagedong@tencent.com> |
|
|
Andrii Nakryiko
|
fd2797ba0e |
bpf: Add support for forced LINK_DETACH command
[upstream commit 73b11c2ab072d5b0599d1e12cc126f55ee306daf] Add LINK_DETACH command to force-detach bpf_link without destroying it. It has the same behavior as auto-detaching of bpf_link due to cgroup dying for bpf_cgroup_link or net_device being destroyed for bpf_xdp_link. In such case, bpf_link is still a valid kernel object, but is defuncts and doesn't hold BPF program attached to corresponding BPF hook. This functionality allows users with enough access rights to manually force-detach attached bpf_link without killing respective owner process. This patch implements LINK_DETACH for cgroup, xdp, and netns links, mostly re-using existing link release handling code. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200731182830.286260-2-andriin@fb.com |
|
|
Alexei Starovoitov
|
53f9de6a6b |
bpf: Introduce bpf timers.
[upstream commit b00628b1c7d595ae5b544e059c27b1f5828314b4]
Introduce 'struct bpf_timer { __u64 :64; __u64 :64; };' that can be embedded
in hash/array/lru maps as a regular field and helpers to operate on it:
// Initialize the timer.
// First 4 bits of 'flags' specify clockid.
// Only CLOCK_MONOTONIC, CLOCK_REALTIME, CLOCK_BOOTTIME are allowed.
long bpf_timer_init(struct bpf_timer *timer, struct bpf_map *map, int flags);
// Configure the timer to call 'callback_fn' static function.
long bpf_timer_set_callback(struct bpf_timer *timer, void *callback_fn);
// Arm the timer to expire 'nsec' nanoseconds from the current time.
long bpf_timer_start(struct bpf_timer *timer, u64 nsec, u64 flags);
// Cancel the timer and wait for callback_fn to finish if it was running.
long bpf_timer_cancel(struct bpf_timer *timer);
Here is how BPF program might look like:
struct map_elem {
int counter;
struct bpf_timer timer;
};
struct {
__uint(type, BPF_MAP_TYPE_HASH);
__uint(max_entries, 1000);
__type(key, int);
__type(value, struct map_elem);
} hmap SEC(".maps");
static int timer_cb(void *map, int *key, struct map_elem *val);
/* val points to particular map element that contains bpf_timer. */
SEC("fentry/bpf_fentry_test1")
int BPF_PROG(test1, int a)
{
struct map_elem *val;
int key = 0;
val = bpf_map_lookup_elem(&hmap, &key);
if (val) {
bpf_timer_init(&val->timer, &hmap, CLOCK_REALTIME);
bpf_timer_set_callback(&val->timer, timer_cb);
bpf_timer_start(&val->timer, 1000 /* call timer_cb2 in 1 usec */, 0);
}
}
This patch adds helper implementations that rely on hrtimers
to call bpf functions as timers expire.
The following patches add necessary safety checks.
Only programs with CAP_BPF are allowed to use bpf_timer.
The amount of timers used by the program is constrained by
the memcg recorded at map creation time.
The bpf_timer_init() helper needs explicit 'map' argument because inner maps
are dynamic and not known at load time. While the bpf_timer_set_callback() is
receiving hidden 'aux->prog' argument supplied by the verifier.
The prog pointer is needed to do refcnting of bpf program to make sure that
program doesn't get freed while the timer is armed. This approach relies on
"user refcnt" scheme used in prog_array that stores bpf programs for
bpf_tail_call. The bpf_timer_set_callback() will increment the prog refcnt which is
paired with bpf_timer_cancel() that will drop the prog refcnt. The
ops->map_release_uref is responsible for cancelling the timers and dropping
prog refcnt when user space reference to a map reaches zero.
This uref approach is done to make sure that Ctrl-C of user space process will
not leave timers running forever unless the user space explicitly pinned a map
that contained timers in bpffs.
bpf_timer_init() and bpf_timer_set_callback() will return -EPERM if map doesn't
have user references (is not held by open file descriptor from user space and
not pinned in bpffs).
The bpf_map_delete_elem() and bpf_map_update_elem() operations cancel
and free the timer if given map element had it allocated.
"bpftool map update" command can be used to cancel timers.
The 'struct bpf_timer' is explicitly __attribute__((aligned(8))) because
'__u64 :64' has 1 byte alignment of 8 byte padding.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-4-alexei.starovoitov@gmail.com
|
|
|
Daniel Borkmann
|
2edf03ab9a |
bpf: Emit audit messages upon successful prog load and unload
[upstream commit bae141f54be83b06652c1d47e50e4e75ed4e9c7e]
Allow for audit messages to be emitted upon BPF program load and
unload for having a timeline of events. The load itself is in
syscall context, so additional info about the process initiating
the BPF prog creation can be logged and later directly correlated
to the unload event.
The only info really needed from BPF side is the globally unique
prog ID where then audit user space tooling can query / dump all
info needed about the specific BPF program right upon load event
and enrich the record, thus these changes needed here can be kept
small and non-intrusive to the core.
Raw example output:
# auditctl -D
# auditctl -a always,exit -F arch=x86_64 -S bpf
# ausearch --start recent -m 1334
...
----
time->Wed Nov 27 16:04:13 2019
type=PROCTITLE msg=audit(1574867053.120:84664): proctitle="./bpf"
type=SYSCALL msg=audit(1574867053.120:84664): arch=c000003e syscall=321 \
success=yes exit=3 a0=5 a1=7ffea484fbe0 a2=70 a3=0 items=0 ppid=7477 \
pid=12698 auid=1001 uid=1001 gid=1001 euid=1001 suid=1001 fsuid=1001 \
egid=1001 sgid=1001 fsgid=1001 tty=pts2 ses=4 comm="bpf" \
exe="/home/jolsa/auditd/audit-testsuite/tests/bpf/bpf" \
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null)
type=UNKNOWN[1334] msg=audit(1574867053.120:84664): prog-id=76 op=LOAD
----
time->Wed Nov 27 16:04:13 2019
type=UNKNOWN[1334] msg=audit(1574867053.120:84665): prog-id=76 op=UNLOAD
...
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/bpf/20191206214934.11319-1-jolsa@kernel.org
|
|
|
Yonghong Song
|
dfaec15bb0 |
bpf: Add bpf_for_each_map_elem() helper
[upstream commit 69c087ba6225b574afb6e505b72cb75242a3d844] The bpf_for_each_map_elem() helper is introduced which iterates all map elements with a callback function. The helper signature looks like long bpf_for_each_map_elem(map, callback_fn, callback_ctx, flags) and for each map element, the callback_fn will be called. For example, like hashmap, the callback signature may look like long callback_fn(map, key, val, callback_ctx) There are two known use cases for this. One is from upstream ([1]) where a for_each_map_elem helper may help implement a timeout mechanism in a more generic way. Another is from our internal discussion for a firewall use case where a map contains all the rules. The packet data can be compared to all these rules to decide allow or deny the packet. For array maps, users can already use a bounded loop to traverse elements. Using this helper can avoid using bounded loop. For other type of maps (e.g., hash maps) where bounded loop is hard or impossible to use, this helper provides a convenient way to operate on all elements. For callback_fn, besides map and map element, a callback_ctx, allocated on caller stack, is also passed to the callback function. This callback_ctx argument can provide additional input and allow to write to caller stack for output. If the callback_fn returns 0, the helper will iterate through next element if available. If the callback_fn returns 1, the helper will stop iterating and returns to the bpf program. Other return values are not used for now. Currently, this helper is only available with jit. It is possible to make it work with interpreter with so effort but I leave it as the future work. [1]: https://lore.kernel.org/bpf/20210122205415.113822-1-xiyou.wangcong@gmail.com/ Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210226204925.3884923-1-yhs@fb.com |
|
|
Hao Luo
|
74902f32c8 |
bpf: Introduce pseudo_btf_id
[upstream commit 4976b718c3551faba2c0616ef55ebeb74db1c5ca] Pseudo_btf_id is a type of ld_imm insn that associates a btf_id to a ksym so that further dereferences on the ksym can use the BTF info to validate accesses. Internally, when seeing a pseudo_btf_id ld insn, the verifier reads the btf_id stored in the insn[0]'s imm field and marks the dst_reg as PTR_TO_BTF_ID. The btf_id points to a VAR_KIND, which is encoded in btf_vminux by pahole. If the VAR is not of a struct type, the dst reg will be marked as PTR_TO_MEM instead of PTR_TO_BTF_ID and the mem_size is resolved to the size of the VAR's type. >From the VAR btf_id, the verifier can also read the address of the ksym's corresponding kernel var from kallsyms and use that to fill dst_reg. Therefore, the proper functionality of pseudo_btf_id depends on (1) kallsyms and (2) the encoding of kernel global VARs in pahole, which should be available since pahole v1.18. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200929235049.2533242-2-haoluo@google.com |
|
|
Andrii Nakryiko
|
cf050d16bc |
bpf: Implement BPF ring buffer and verifier support for it
[upstream commit 457f44363a8894135c85b7a9afd2bd8196db24ab]
This commit adds a new MPSC ring buffer implementation into BPF ecosystem,
which allows multiple CPUs to submit data to a single shared ring buffer. On
the consumption side, only single consumer is assumed.
Motivation
----------
There are two distinctive motivators for this work, which are not satisfied by
existing perf buffer, which prompted creation of a new ring buffer
implementation.
- more efficient memory utilization by sharing ring buffer across CPUs;
- preserving ordering of events that happen sequentially in time, even
across multiple CPUs (e.g., fork/exec/exit events for a task).
These two problems are independent, but perf buffer fails to satisfy both.
Both are a result of a choice to have per-CPU perf ring buffer. Both can be
also solved by having an MPSC implementation of ring buffer. The ordering
problem could technically be solved for perf buffer with some in-kernel
counting, but given the first one requires an MPSC buffer, the same solution
would solve the second problem automatically.
Semantics and APIs
------------------
Single ring buffer is presented to BPF programs as an instance of BPF map of
type BPF_MAP_TYPE_RINGBUF. Two other alternatives considered, but ultimately
rejected.
One way would be to, similar to BPF_MAP_TYPE_PERF_EVENT_ARRAY, make
BPF_MAP_TYPE_RINGBUF could represent an array of ring buffers, but not enforce
"same CPU only" rule. This would be more familiar interface compatible with
existing perf buffer use in BPF, but would fail if application needed more
advanced logic to lookup ring buffer by arbitrary key. HASH_OF_MAPS addresses
this with current approach. Additionally, given the performance of BPF
ringbuf, many use cases would just opt into a simple single ring buffer shared
among all CPUs, for which current approach would be an overkill.
Another approach could introduce a new concept, alongside BPF map, to
represent generic "container" object, which doesn't necessarily have key/value
interface with lookup/update/delete operations. This approach would add a lot
of extra infrastructure that has to be built for observability and verifier
support. It would also add another concept that BPF developers would have to
familiarize themselves with, new syntax in libbpf, etc. But then would really
provide no additional benefits over the approach of using a map.
BPF_MAP_TYPE_RINGBUF doesn't support lookup/update/delete operations, but so
doesn't few other map types (e.g., queue and stack; array doesn't support
delete, etc).
The approach chosen has an advantage of re-using existing BPF map
infrastructure (introspection APIs in kernel, libbpf support, etc), being
familiar concept (no need to teach users a new type of object in BPF program),
and utilizing existing tooling (bpftool). For common scenario of using
a single ring buffer for all CPUs, it's as simple and straightforward, as
would be with a dedicated "container" object. On the other hand, by being
a map, it can be combined with ARRAY_OF_MAPS and HASH_OF_MAPS map-in-maps to
implement a wide variety of topologies, from one ring buffer for each CPU
(e.g., as a replacement for perf buffer use cases), to a complicated
application hashing/sharding of ring buffers (e.g., having a small pool of
ring buffers with hashed task's tgid being a look up key to preserve order,
but reduce contention).
Key and value sizes are enforced to be zero. max_entries is used to specify
the size of ring buffer and has to be a power of 2 value.
There are a bunch of similarities between perf buffer
(BPF_MAP_TYPE_PERF_EVENT_ARRAY) and new BPF ring buffer semantics:
- variable-length records;
- if there is no more space left in ring buffer, reservation fails, no
blocking;
- memory-mappable data area for user-space applications for ease of
consumption and high performance;
- epoll notifications for new incoming data;
- but still the ability to do busy polling for new data to achieve the
lowest latency, if necessary.
BPF ringbuf provides two sets of APIs to BPF programs:
- bpf_ringbuf_output() allows to *copy* data from one place to a ring
buffer, similarly to bpf_perf_event_output();
- bpf_ringbuf_reserve()/bpf_ringbuf_commit()/bpf_ringbuf_discard() APIs
split the whole process into two steps. First, a fixed amount of space is
reserved. If successful, a pointer to a data inside ring buffer data area
is returned, which BPF programs can use similarly to a data inside
array/hash maps. Once ready, this piece of memory is either committed or
discarded. Discard is similar to commit, but makes consumer ignore the
record.
bpf_ringbuf_output() has disadvantage of incurring extra memory copy, because
record has to be prepared in some other place first. But it allows to submit
records of the length that's not known to verifier beforehand. It also closely
matches bpf_perf_event_output(), so will simplify migration significantly.
bpf_ringbuf_reserve() avoids the extra copy of memory by providing a memory
pointer directly to ring buffer memory. In a lot of cases records are larger
than BPF stack space allows, so many programs have use extra per-CPU array as
a temporary heap for preparing sample. bpf_ringbuf_reserve() avoid this needs
completely. But in exchange, it only allows a known constant size of memory to
be reserved, such that verifier can verify that BPF program can't access
memory outside its reserved record space. bpf_ringbuf_output(), while slightly
slower due to extra memory copy, covers some use cases that are not suitable
for bpf_ringbuf_reserve().
The difference between commit and discard is very small. Discard just marks
a record as discarded, and such records are supposed to be ignored by consumer
code. Discard is useful for some advanced use-cases, such as ensuring
all-or-nothing multi-record submission, or emulating temporary malloc()/free()
within single BPF program invocation.
Each reserved record is tracked by verifier through existing
reference-tracking logic, similar to socket ref-tracking. It is thus
impossible to reserve a record, but forget to submit (or discard) it.
bpf_ringbuf_query() helper allows to query various properties of ring buffer.
Currently 4 are supported:
- BPF_RB_AVAIL_DATA returns amount of unconsumed data in ring buffer;
- BPF_RB_RING_SIZE returns the size of ring buffer;
- BPF_RB_CONS_POS/BPF_RB_PROD_POS returns current logical possition of
consumer/producer, respectively.
Returned values are momentarily snapshots of ring buffer state and could be
off by the time helper returns, so this should be used only for
debugging/reporting reasons or for implementing various heuristics, that take
into account highly-changeable nature of some of those characteristics.
One such heuristic might involve more fine-grained control over poll/epoll
notifications about new data availability in ring buffer. Together with
BPF_RB_NO_WAKEUP/BPF_RB_FORCE_WAKEUP flags for output/commit/discard helpers,
it allows BPF program a high degree of control and, e.g., more efficient
batched notifications. Default self-balancing strategy, though, should be
adequate for most applications and will work reliable and efficiently already.
Design and implementation
-------------------------
This reserve/commit schema allows a natural way for multiple producers, either
on different CPUs or even on the same CPU/in the same BPF program, to reserve
independent records and work with them without blocking other producers. This
means that if BPF program was interruped by another BPF program sharing the
same ring buffer, they will both get a record reserved (provided there is
enough space left) and can work with it and submit it independently. This
applies to NMI context as well, except that due to using a spinlock during
reservation, in NMI context, bpf_ringbuf_reserve() might fail to get a lock,
in which case reservation will fail even if ring buffer is not full.
The ring buffer itself internally is implemented as a power-of-2 sized
circular buffer, with two logical and ever-increasing counters (which might
wrap around on 32-bit architectures, that's not a problem):
- consumer counter shows up to which logical position consumer consumed the
data;
- producer counter denotes amount of data reserved by all producers.
Each time a record is reserved, producer that "owns" the record will
successfully advance producer counter. At that point, data is still not yet
ready to be consumed, though. Each record has 8 byte header, which contains
the length of reserved record, as well as two extra bits: busy bit to denote
that record is still being worked on, and discard bit, which might be set at
commit time if record is discarded. In the latter case, consumer is supposed
to skip the record and move on to the next one. Record header also encodes
record's relative offset from the beginning of ring buffer data area (in
pages). This allows bpf_ringbuf_commit()/bpf_ringbuf_discard() to accept only
the pointer to the record itself, without requiring also the pointer to ring
buffer itself. Ring buffer memory location will be restored from record
metadata header. This significantly simplifies verifier, as well as improving
API usability.
Producer counter increments are serialized under spinlock, so there is
a strict ordering between reservations. Commits, on the other hand, are
completely lockless and independent. All records become available to consumer
in the order of reservations, but only after all previous records where
already committed. It is thus possible for slow producers to temporarily hold
off submitted records, that were reserved later.
Reservation/commit/consumer protocol is verified by litmus tests in
Documentation/litmus-test/bpf-rb.
One interesting implementation bit, that significantly simplifies (and thus
speeds up as well) implementation of both producers and consumers is how data
area is mapped twice contiguously back-to-back in the virtual memory. This
allows to not take any special measures for samples that have to wrap around
at the end of the circular buffer data area, because the next page after the
last data page would be first data page again, and thus the sample will still
appear completely contiguous in virtual memory. See comment and a simple ASCII
diagram showing this visually in bpf_ringbuf_area_alloc().
Another feature that distinguishes BPF ringbuf from perf ring buffer is
a self-pacing notifications of new data being availability.
bpf_ringbuf_commit() implementation will send a notification of new record
being available after commit only if consumer has already caught up right up
to the record being committed. If not, consumer still has to catch up and thus
will see new data anyways without needing an extra poll notification.
Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbuf.c) show that
this allows to achieve a very high throughput without having to resort to
tricks like "notify only every Nth sample", which are necessary with perf
buffer. For extreme cases, when BPF program wants more manual control of
notifications, commit/discard/output helpers accept BPF_RB_NO_WAKEUP and
BPF_RB_FORCE_WAKEUP flags, which give full control over notifications of data
availability, but require extra caution and diligence in using this API.
Comparison to alternatives
--------------------------
Before considering implementing BPF ring buffer from scratch existing
alternatives in kernel were evaluated, but didn't seem to meet the needs. They
largely fell into few categores:
- per-CPU buffers (perf, ftrace, etc), which don't satisfy two motivations
outlined above (ordering and memory consumption);
- linked list-based implementations; while some were multi-producer designs,
consuming these from user-space would be very complicated and most
probably not performant; memory-mapping contiguous piece of memory is
simpler and more performant for user-space consumers;
- io_uring is SPSC, but also requires fixed-sized elements. Naively turning
SPSC queue into MPSC w/ lock would have subpar performance compared to
locked reserve + lockless commit, as with BPF ring buffer. Fixed sized
elements would be too limiting for BPF programs, given existing BPF
programs heavily rely on variable-sized perf buffer already;
- specialized implementations (like a new printk ring buffer, [0]) with lots
of printk-specific limitations and implications, that didn't seem to fit
well for intended use with BPF programs.
[0] https://lwn.net/Articles/779550/
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-2-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
|
KP Singh
|
09233d0e2c |
bpf: Allow local storage to be used from LSM programs
[upstream commit 30897832d8b97e93833fb52c0a02951db3692ed2]
Adds support for both bpf_{sk, inode}_storage_{get, delete} to be used
in LSM programs. These helpers are not used for tracing programs
(currently) as their usage is tied to the life-cycle of the object and
should only be used where the owning object won't be freed (when the
owning object is passed as an argument to the LSM hook). Thus, they
are safer to use in LSM hooks than tracing. Usage of local storage in
tracing programs will probably follow a per function based whitelist
approach.
Since the UAPI helper signature for bpf_sk_storage expect a bpf_sock,
it, leads to a compilation warning for LSM programs, it's also updated
to accept a void * pointer instead.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-7-kpsingh@chromium.org
|
|
|
KP Singh
|
ff448dfd59 |
bpf: Implement bpf_local_storage for inodes
[upstream commit 8ea636848aca35b9f97c5b5dee30225cf2dd0fe6] Similar to bpf_local_storage for sockets, add local storage for inodes. The life-cycle of storage is managed with the life-cycle of the inode. i.e. the storage is destroyed along with the owning inode. The BPF LSM allocates an __rcu pointer to the bpf_local_storage in the security blob which are now stackable and can co-exist with other LSMs. Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200825182919.1118197-6-kpsingh@chromium.org |
|
|
KP Singh
|
31faab8553 |
bpf: Generalize bpf_sk_storage
[upstream commit f836a56e84ffc9f1a1cd73f77e10404ca46a4616] Refactor the functionality in bpf_sk_storage.c so that concept of storage linked to kernel objects can be extended to other objects like inode, task_struct etc. Each new local storage will still be a separate map and provide its own set of helpers. This allows for future object specific extensions and still share a lot of the underlying implementation. This includes the changes suggested by Martin in: https://lore.kernel.org/bpf/20200725013047.4006241-1-kafai@fb.com/ adding new map operations to support bpf_local_storage maps: * storages for different kernel objects to optionally have different memory charging strategy (map_local_storage_charge, map_local_storage_uncharge) * Functionality to extract the storage pointer from a pointer to the owning object (map_owner_storage_ptr) Co-developed-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200825182919.1118197-4-kpsingh@chromium.org |
|
|
Martin KaFai Lau
|
46652d2f64 |
bpf: inet_diag: Dump bpf_sk_storages in inet_diag_dump()
[upstream commit 085c20cacf2b72991ce1c9d99a5e2f1d9e73bb68] This patch will dump out the bpf_sk_storages of a sk if the request has the INET_DIAG_REQ_SK_BPF_STORAGES nlattr. An array of SK_DIAG_BPF_STORAGE_REQ_MAP_FD can be specified in INET_DIAG_REQ_SK_BPF_STORAGES to select which bpf_sk_storage to dump. If no map_fd is specified, all bpf_sk_storages of a sk will be dumped. bpf_sk_storages can be added to the system at runtime. It is difficult to find a proper static value for cb->min_dump_alloc. This patch learns the nlattr size required to dump the bpf_sk_storages of a sk. If it happens to be the very first nlmsg of a dump and it cannot fit the needed bpf_sk_storages, it will try to expand the skb by "pskb_expand_head()". Instead of expanding it in inet_sk_diag_fill(), it is expanded at a sleepable context in __inet_diag_dump() so __GFP_DIRECT_RECLAIM can be used. In __inet_diag_dump(), it will retry as long as the skb is empty and the cb->min_dump_alloc becomes larger than before. cb->min_dump_alloc is bounded by KMALLOC_MAX_SIZE. The min_dump_alloc is also changed from 'u16' to 'u32' to accommodate a sk that may have a few large bpf_sk_storages. The updated cb->min_dump_alloc will also be used to allocate the skb in the next dump. This logic already exists in netlink_dump(). Here is the sample output of a locally modified 'ss' and it could be made more readable by using BTF later: [root@arch-fb-vm1 ~]# ss --bpf-map-id 14 --bpf-map-id 13 -t6an 'dst [::1]:8989' State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess ESTAB 0 0 [::1]:51072 [::1]:8989 bpf_map_id:14 value:[ 3feb ] bpf_map_id:13 value:[ 3f ] ESTAB 0 0 [::1]:51070 [::1]:8989 bpf_map_id:14 value:[ 3feb ] bpf_map_id:13 value:[ 3f ] [root@arch-fb-vm1 ~]# ~/devshare/github/iproute2/misc/ss --bpf-maps -t6an 'dst [::1]:8989' State Recv-Q Send-Q Local Address:Port Peer Address:Port Process ESTAB 0 0 [::1]:51072 [::1]:8989 bpf_map_id:14 value:[ 3feb ] bpf_map_id:13 value:[ 3f ] bpf_map_id:12 value:[ 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000... total:65407 ] ESTAB 0 0 [::1]:51070 [::1]:8989 bpf_map_id:14 value:[ 3feb ] bpf_map_id:13 value:[ 3f ] bpf_map_id:12 value:[ 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000... total:65407 ] Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200225230427.1976129-1-kafai@fb.com |
|
|
Martin KaFai Lau
|
32d3903cf9 |
bpf: INET_DIAG support in bpf_sk_storage
[upstream commit 1ed4d92458a969e71e7914550b6f0c730c14d84e]
This patch adds INET_DIAG support to bpf_sk_storage.
1. Although this series adds bpf_sk_storage diag capability to inet sk,
bpf_sk_storage is in general applicable to all fullsock. Hence, the
bpf_sk_storage logic will operate on SK_DIAG_* nlattr. The caller
will pass in its specific nesting nlattr (e.g. INET_DIAG_*) as
the argument.
2. The request will be like:
INET_DIAG_REQ_SK_BPF_STORAGES (nla_nest) (defined in latter patch)
SK_DIAG_BPF_STORAGE_REQ_MAP_FD (nla_put_u32)
SK_DIAG_BPF_STORAGE_REQ_MAP_FD (nla_put_u32)
......
Considering there could have multiple bpf_sk_storages in a sk,
instead of reusing INET_DIAG_INFO ("ss -i"), the user can select
some specific bpf_sk_storage to dump by specifying an array of
SK_DIAG_BPF_STORAGE_REQ_MAP_FD.
If no SK_DIAG_BPF_STORAGE_REQ_MAP_FD is specified (i.e. an empty
INET_DIAG_REQ_SK_BPF_STORAGES), it will dump all bpf_sk_storages
of a sk.
3. The reply will be like:
INET_DIAG_BPF_SK_STORAGES (nla_nest) (defined in latter patch)
SK_DIAG_BPF_STORAGE (nla_nest)
SK_DIAG_BPF_STORAGE_MAP_ID (nla_put_u32)
SK_DIAG_BPF_STORAGE_MAP_VALUE (nla_reserve_64bit)
SK_DIAG_BPF_STORAGE (nla_nest)
SK_DIAG_BPF_STORAGE_MAP_ID (nla_put_u32)
SK_DIAG_BPF_STORAGE_MAP_VALUE (nla_reserve_64bit)
......
4. Unlike other INET_DIAG info of a sk which is pretty static, the size
required to dump the bpf_sk_storage(s) of a sk is dynamic as the
system adding more bpf_sk_storage_map. It is hard to set a static
min_dump_alloc size.
Hence, this series learns it at the runtime and adjust the
cb->min_dump_alloc as it iterates all sk(s) of a system. The
"unsigned int *res_diag_size" in bpf_sk_storage_diag_put()
is for this purpose.
The next patch will update the cb->min_dump_alloc as it
iterates the sk(s).
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200225230421.1975729-1-kafai@fb.com
|
|
|
Martin KaFai Lau
|
f7a110aff2 |
inet_diag: Move the INET_DIAG_REQ_BYTECODE nlattr to cb->data
[upstream commit 0df6d32842b9a5f97a29ea90c8adc5cfac38341d] The INET_DIAG_REQ_BYTECODE nlattr is currently re-found every time when the "dump()" is re-started. In a latter patch, it will also need to parse the new INET_DIAG_REQ_SK_BPF_STORAGES nlattr to learn the map_fds. Thus, this patch takes this chance to store the parsed nlattr in cb->data during the "start" time of a dump. By doing this, the "bc" argument also becomes unnecessary and is removed. Also, the two copies of the INET_DIAG_REQ_BYTECODE parsing-audit logic between compat/current version can be consolidated to one. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200225230415.1975555-1-kafai@fb.com |
|
|
Yonghong Song
|
bc0d87eda9 |
bpf: Change uapi for bpf iterator map elements
[upstream commit 5e7b30205cef80f6bb922e61834437ca7bff5837]
Commit a5cbe05a6673 ("bpf: Implement bpf iterator for
map elements") added bpf iterator support for
map elements. The map element bpf iterator requires
info to identify a particular map. In the above
commit, the attr->link_create.target_fd is used
to carry map_fd and an enum bpf_iter_link_info
is added to uapi to specify the target_fd actually
representing a map_fd:
enum bpf_iter_link_info {
BPF_ITER_LINK_UNSPEC = 0,
BPF_ITER_LINK_MAP_FD = 1,
MAX_BPF_ITER_LINK_INFO,
};
This is an extensible approach as we can grow
enumerator for pid, cgroup_id, etc. and we can
unionize target_fd for pid, cgroup_id, etc.
But in the future, there are chances that
more complex customization may happen, e.g.,
for tasks, it could be filtered based on
both cgroup_id and user_id.
This patch changed the uapi to have fields
__aligned_u64 iter_info;
__u32 iter_info_len;
for additional iter_info for link_create.
The iter_info is defined as
union bpf_iter_link_info {
struct {
__u32 map_fd;
} map;
};
So future extension for additional customization
will be easier. The bpf_iter_link_info will be
passed to target callback to validate and generic
bpf_iter framework does not need to deal it any
more.
Note that map_fd = 0 will be considered invalid
and -EBADF will be returned to user space.
Fixes: a5cbe05a6673 ("bpf: Implement bpf iterator for map elements")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200805055056.1457463-1-yhs@fb.com
|
|
|
Yonghong Song
|
ebccfefa20 |
bpf: Implement bpf iterator for map elements
[upstream commit a5cbe05a6673b85bed2a63ffcfea6a96c6410cff] The bpf iterator for map elements are implemented. The bpf program will receive four parameters: bpf_iter_meta *meta: the meta data bpf_map *map: the bpf_map whose elements are traversed void *key: the key of one element void *value: the value of the same element Here, meta and map pointers are always valid, and key has register type PTR_TO_RDONLY_BUF_OR_NULL and value has register type PTR_TO_RDWR_BUF_OR_NULL. The kernel will track the access range of key and value during verification time. Later, these values will be compared against the values in the actual map to ensure all accesses are within range. A new field iter_seq_info is added to bpf_map_ops which is used to add map type specific information, i.e., seq_ops, init/fini seq_file func and seq_file private data size. Subsequent patches will have actual implementation for bpf_map_ops->iter_seq_info. In user space, BPF_ITER_LINK_MAP_FD needs to be specified in prog attr->link_create.flags, which indicates that attr->link_create.target_fd is a map_fd. The reason for such an explicit flag is for possible future cases where one bpf iterator may allow more than one possible customization, e.g., pid and cgroup id for task_file. Current kernel internal implementation only allows the target to register at most one required bpf_iter_link_info. To support the above case, optional bpf_iter_link_info's are needed, the target can be extended to register such link infos, and user provided link_info needs to match one of target supported ones. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com |
|
|
Song Liu
|
956ed363c8 |
bpf: Introduce helper bpf_get_task_stack()
[upstream commit fa28dcb82a38f8e3993b0fae9106b1a80b59e4f0] Introduce helper bpf_get_task_stack(), which dumps stack trace of given task. This is different to bpf_get_stack(), which gets stack track of current task. One potential use case of bpf_get_task_stack() is to call it from bpf_iter__task and dump all /proc/<pid>/stack to a seq_file. bpf_get_task_stack() uses stack_trace_save_tsk() instead of get_perf_callchain() for kernel stack. The benefit of this choice is that stack_trace_save_tsk() doesn't require changes in arch/. The downside of using stack_trace_save_tsk() is that stack_trace_save_tsk() dumps the stack trace to unsigned long array. For 32-bit systems, we need to translate it to u64 array. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200630062846.664389-3-songliubraving@fb.com |
|
|
Yonghong Song
|
5f8cc94c77 |
bpf: Add bpf_skc_to_udp6_sock() helper
[upstream commit 0d4fad3e57df2bf61e8ffc8d12a34b1caf9b8835] The helper is used in tracing programs to cast a socket pointer to a udp6_sock pointer. The return value could be NULL if the casting is illegal. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20200623230815.3988481-1-yhs@fb.com |
|
|
Yonghong Song
|
61becd42db |
bpf: Add bpf_skc_to_{tcp, tcp_timewait, tcp_request}_sock() helpers
[upstream commit 478cfbdf5f13dfe09cfd0b1cbac821f5e27f6108] Three more helpers are added to cast a sock_common pointer to an tcp_sock, tcp_timewait_sock or a tcp_request_sock for tracing programs. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200623230811.3988277-1-yhs@fb.com |
|
|
Yonghong Song
|
4ec5bb8aff |
bpf: Add bpf_skc_to_tcp6_sock() helper
[upstream commit af7ec13833619e17f03aa73a785a2f871da6d66b] The helper is used in tracing programs to cast a socket pointer to a tcp6_sock pointer. The return value could be NULL if the casting is illegal. A new helper return type RET_PTR_TO_BTF_ID_OR_NULL is added so the verifier is able to deduce proper return types for the helper. Different from the previous BTF_ID based helpers, the bpf_skc_to_tcp6_sock() argument can be several possible btf_ids. More specifically, all possible socket data structures with sock_common appearing in the first in the memory layout. This patch only added socket types related to tcp and udp. All possible argument btf_id and return value btf_id for helper bpf_skc_to_tcp6_sock() are pre-calculcated and cached. In the future, it is even possible to precompute these btf_id's at kernel build time. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200623230809.3988195-1-yhs@fb.com |
|
|
Alexei Starovoitov
|
5540cf3969 |
bpf, capability: Introduce CAP_BPF
[upstream commit a17b53c4a4b55ec322c132b6670743612229ee9c]
Split BPF operations that are allowed under CAP_SYS_ADMIN into
combination of CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN.
For backward compatibility include them in CAP_SYS_ADMIN as well.
The end result provides simple safety model for applications that use BPF:
- to load tracing program types
BPF_PROG_TYPE_{KPROBE, TRACEPOINT, PERF_EVENT, RAW_TRACEPOINT, etc}
use CAP_BPF and CAP_PERFMON
- to load networking program types
BPF_PROG_TYPE_{SCHED_CLS, XDP, SK_SKB, etc}
use CAP_BPF and CAP_NET_ADMIN
There are few exceptions from this rule:
- bpf_trace_printk() is allowed in networking programs, but it's using
tracing mechanism, hence this helper needs additional CAP_PERFMON
if networking program is using this helper.
- BPF_F_ZERO_SEED flag for hash/lru map is allowed under CAP_SYS_ADMIN only
to discourage production use.
- BPF HW offload is allowed under CAP_SYS_ADMIN.
- bpf_probe_write_user() is allowed under CAP_SYS_ADMIN only.
CAPs are not checked at attach/detach time with two exceptions:
- loading BPF_PROG_TYPE_CGROUP_SKB is allowed for unprivileged users,
hence CAP_NET_ADMIN is required at attach time.
- flow_dissector detach doesn't check prog FD at detach,
hence CAP_NET_ADMIN is required at detach time.
CAP_SYS_ADMIN is required to iterate BPF objects (progs, maps, links) via get_next_id
command and convert them to file descriptor via GET_FD_BY_ID command.
This restriction guarantees that mutliple tasks with CAP_BPF are not able to
affect each other. That leads to clean isolation of tasks. For example:
task A with CAP_BPF and CAP_NET_ADMIN loads and attaches a firewall via bpf_link.
task B with the same capabilities cannot detach that firewall unless
task A explicitly passed link FD to task B via scm_rights or bpffs.
CAP_SYS_ADMIN can still detach/unload everything.
Two networking user apps with CAP_SYS_ADMIN and CAP_NET_ADMIN can
accidentely mess with each other programs and maps.
Two networking user apps with CAP_NET_ADMIN and CAP_BPF cannot affect each other.
CAP_NET_ADMIN + CAP_BPF allows networking programs access only packet data.
Such networking progs cannot access arbitrary kernel memory or leak pointers.
bpftool, bpftrace, bcc tools binaries should NOT be installed with
CAP_BPF and CAP_PERFMON, since unpriv users will be able to read kernel secrets.
But users with these two permissions will be able to use these tracing tools.
CAP_PERFMON is least secure, since it allows kprobes and kernel memory access.
CAP_NET_ADMIN can stop network traffic via iproute2.
CAP_BPF is the safest from security point of view and harmless on its own.
Having CAP_BPF and/or CAP_NET_ADMIN is not enough to write into arbitrary map
and if that map is used by firewall-like bpf prog.
CAP_BPF allows many bpf prog_load commands in parallel. The verifier
may consume large amount of memory and significantly slow down the system.
Existing unprivileged BPF operations are not affected.
In particular unprivileged users are allowed to load socket_filter and cg_skb
program types and to create array, hash, prog_array, map-in-map map types.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200513230355.7858-2-alexei.starovoitov@gmail.com
|
|
|
Eelco Chaudron
|
bb2b98bc97 |
bpf: Add bpf_xdp_output() helper
[upstream commit d831ee84bfc9173eecf30dbbc2553ae81b996c60] Introduce new helper that reuses existing xdp perf_event output implementation, but can be called from raw_tracepoint programs that receive 'struct xdp_buff *' as a tracepoint argument. Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/158348514556.2239.11050972434793741444.stgit@xdp-tutorial |
|
|
Song Liu
|
2dc43a403d |
bpf: Sharing bpf runtime stats with BPF_ENABLE_STATS
[upstream commit d46edd671a147032e22cfeb271a5734703093649] Currently, sysctl kernel.bpf_stats_enabled controls BPF runtime stats. Typical userspace tools use kernel.bpf_stats_enabled as follows: 1. Enable kernel.bpf_stats_enabled; 2. Check program run_time_ns; 3. Sleep for the monitoring period; 4. Check program run_time_ns again, calculate the difference; 5. Disable kernel.bpf_stats_enabled. The problem with this approach is that only one userspace tool can toggle this sysctl. If multiple tools toggle the sysctl at the same time, the measurement may be inaccurate. To fix this problem while keep backward compatibility, introduce a new bpf command BPF_ENABLE_STATS. On success, this command enables stats and returns a valid fd. BPF_ENABLE_STATS takes argument "type". Currently, only one type, BPF_STATS_RUN_TIME, is supported. We can extend the command to support other types of stats in the future. With BPF_ENABLE_STATS, user space tool would have the following flow: 1. Get a fd with BPF_ENABLE_STATS, and make sure it is valid; 2. Check program run_time_ns; 3. Sleep for the monitoring period; 4. Check program run_time_ns again, calculate the difference; 5. Close the fd. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200430071506.1408910-2-songliubraving@fb.com |
|
|
Yonghong Song
|
ad8602adad |
bpf: Add bpf_seq_printf and bpf_seq_write helpers
[upstream commit 492e639f0c222784e2e0f121966375f641c61b15]
Two helpers bpf_seq_printf and bpf_seq_write, are added for
writing data to the seq_file buffer.
bpf_seq_printf supports common format string flag/width/type
fields so at least I can get identical results for
netlink and ipv6_route targets.
For bpf_seq_printf and bpf_seq_write, return value -EOVERFLOW
specifically indicates a write failure due to overflow, which
means the object will be repeated in the next bpf invocation
if object collection stays the same. Note that if the object
collection is changed, depending how collection traversal is
done, even if the object still in the collection, it may not
be visited.
For bpf_seq_printf, format %s, %p{i,I}{4,6} needs to
read kernel memory. Reading kernel memory may fail in
the following two cases:
- invalid kernel address, or
- valid kernel address but requiring a major fault
If reading kernel memory failed, the %s string will be
an empty string and %p{i,I}{4,6} will be all 0.
Not returning error to bpf program is consistent with
what bpf_trace_printk() does for now.
bpf_seq_printf may return -EBUSY meaning that internal percpu
buffer for memory copy of strings or other pointees is
not available. Bpf program can return 1 to indicate it
wants the same object to be repeated. Right now, this should not
happen on no-RT kernels since migrate_disable(), which guards
bpf prog call, calls preempt_disable().
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175914.2476661-1-yhs@fb.com
|
|
|
Yonghong Song
|
0d8003e3ca |
bpf: Create anonymous bpf iterator
[upstream commit ac51d99bf81caac8d8881fe52098948110d0de68]
A new bpf command BPF_ITER_CREATE is added.
The anonymous bpf iterator is seq_file based.
The seq_file private data are referenced by targets.
The bpf_iter infrastructure allocated additional space
at seq_file->private before the space used by targets
to store some meta data, e.g.,
prog: prog to run
session_id: an unique id for each opened seq_file
seq_num: how many times bpf programs are queried in this session
done_stop: an internal state to decide whether bpf program
should be called in seq_ops->stop() or not
The seq_num will start from 0 for valid objects.
The bpf program may see the same seq_num more than once if
- seq_file buffer overflow happens and the same object
is retried by bpf_seq_read(), or
- the bpf program explicitly requests a retry of the
same object
Since module is not supported for bpf_iter, all target
registeration happens at __init time, so there is no
need to change bpf_iter_unreg_target() as it is used
mostly in error path of the init function at which time
no bpf iterators have been created yet.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
|
|
|
Jakub Sitnicki
|
791c113e9b |
bpf: Introduce SK_LOOKUP program type with a dedicated attach point
[upstream commit e9ddbb7707ff5891616240026062b8c1e29864ca]
Add a new program type BPF_PROG_TYPE_SK_LOOKUP with a dedicated attach type
BPF_SK_LOOKUP. The new program kind is to be invoked by the transport layer
when looking up a listening socket for a new connection request for
connection oriented protocols, or when looking up an unconnected socket for
a packet for connection-less protocols.
When called, SK_LOOKUP BPF program can select a socket that will receive
the packet. This serves as a mechanism to overcome the limits of what
bind() API allows to express. Two use-cases driving this work are:
(1) steer packets destined to an IP range, on fixed port to a socket
192.0.2.0/24, port 80 -> NGINX socket
(2) steer packets destined to an IP address, on any port to a socket
198.51.100.1, any port -> L7 proxy socket
In its run-time context program receives information about the packet that
triggered the socket lookup. Namely IP version, L4 protocol identifier, and
address 4-tuple. Context can be further extended to include ingress
interface identifier.
To select a socket BPF program fetches it from a map holding socket
references, like SOCKMAP or SOCKHASH, and calls bpf_sk_assign(ctx, sk, ...)
helper to record the selection. Transport layer then uses the selected
socket as a result of socket lookup.
In its basic form, SK_LOOKUP acts as a filter and hence must return either
SK_PASS or SK_DROP. If the program returns with SK_PASS, transport should
look for a socket to receive the packet, or use the one selected by the
program if available, while SK_DROP informs the transport layer that the
lookup should fail.
This patch only enables the user to attach an SK_LOOKUP program to a
network namespace. Subsequent patches hook it up to run on local delivery
path in ipv4 and ipv6 stacks.
Suggested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200717103536.397595-3-jakub@cloudflare.com
|
|
|
Joe Stringer
|
e5107771de |
bpf: Add socket assign support
[upstream commit cf7fbe660f2dbd738ab58aea8e9b0ca6ad232449] Add support for TPROXY via a new bpf helper, bpf_sk_assign(). This helper requires the BPF program to discover the socket via a call to bpf_sk*_lookup_*(), then pass this socket to the new helper. The helper takes its own reference to the socket in addition to any existing reference that may or may not currently be obtained for the duration of BPF processing. For the destination socket to receive the traffic, the traffic must be routed towards that socket via local route. The simplest example route is below, but in practice you may want to route traffic more narrowly (eg by CIDR): $ ip route add local default dev lo This patch avoids trying to introduce an extra bit into the skb->sk, as that would require more invasive changes to all code interacting with the socket to ensure that the bit is handled correctly, such as all error-handling cases along the path from the helper in BPF through to the orphan path in the input. Instead, we opt to use the destructor variable to switch on the prefetch of the socket. Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200329225342.16317-2-joe@wand.net.nz |
|
|
Jakub Sitnicki
|
f7aee269a2 |
bpf: Add link-based BPF program attachment to network namespace
[upstream commit 7f045a49fee04b5662cbdeaf0838f9322ae8c63a] Extend bpf() syscall subcommands that operate on bpf_link, that is LINK_CREATE, LINK_UPDATE, OBJ_GET_INFO, to accept attach types tied to network namespaces (only flow dissector at the moment). Link-based and prog-based attachment can be used interchangeably, but only one can exist at a time. Attempts to attach a link when a prog is already attached directly, and the other way around, will be met with -EEXIST. Attempts to detach a program when link exists result in -EINVAL. Attachment of multiple links of same attach type to one netns is not supported with the intention to lift the restriction when a use-case presents itself. Because of that link create returns -E2BIG when trying to create another netns link, when one already exists. Link-based attachments to netns don't keep a netns alive by holding a ref to it. Instead links get auto-detached from netns when the latter is being destroyed, using a pernet pre_exit callback. When auto-detached, link lives in defunct state as long there are open FDs for it. -ENOLINK is returned if a user tries to update a defunct link. Because bpf_link to netns doesn't hold a ref to struct net, special care is taken when releasing, updating, or filling link info. The netns might be getting torn down when any of these link operations are in progress. That is why auto-detach and update/release/fill_info are synchronized by the same mutex. Also, link ops have to always check if auto-detach has not happened yet and if netns is still alive (refcnt > 0). Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200531082846.2117903-5-jakub@cloudflare.com |
|
|
Andrii Nakryiko
|
51e0d48ef2 |
bpf: Add support for BPF_OBJ_GET_INFO_BY_FD for bpf_link
[upstream commit f2e10bff16a0fdd41ba278c84da9813700e356af] Add ability to fetch bpf_link details through BPF_OBJ_GET_INFO_BY_FD command. Also enhance show_fdinfo to potentially include bpf_link type-specific information (similarly to obj_info). Also introduce enum bpf_link_type stored in bpf_link itself and expose it in UAPI. bpf_link_tracing also now will store and return bpf_attach_type. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200429001614.1544-5-andriin@fb.com |
|
|
Andrii Nakryiko
|
9a64bcf0d4 |
bpf: Support GET_FD_BY_ID and GET_NEXT_ID for bpf_link
[upstream commit 2d602c8cf40d65d4a7ac34fe18648d8778e6e594] Add support to look up bpf_link by ID and iterate over all existing bpf_links in the system. GET_FD_BY_ID code handles not-yet-ready bpf_link by checking that its ID hasn't been set to non-zero value yet. Setting bpf_link's ID is done as the very last step in finalizing bpf_link, together with installing FD. This approach allows users of bpf_link in kernel code to not worry about races between user-space and kernel code that hasn't finished attaching and initializing bpf_link. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200429001614.1544-4-andriin@fb.com |
|
|
Andrii Nakryiko
|
a8b098b812 |
bpf: Allocate ID for bpf_link
[upstream commit a3b80e1078943dc12553166fb08e258463dec013] Generate ID for each bpf_link using IDR, similarly to bpf_map and bpf_prog. bpf_link creation, initialization, attachment, and exposing to user-space through FD and ID is a complicated multi-step process, abstract it away through bpf_link_primer and bpf_link_prime(), bpf_link_settle(), and bpf_link_cleanup() internal API. They guarantee that until bpf_link is properly attached, user-space won't be able to access partially-initialized bpf_link either from FD or ID. All this allows to simplify bpf_link attachment and error handling code. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200429001614.1544-3-andriin@fb.com |
|
|
Alexey Budankov
|
fc95f8a2bf |
capabilities: Introduce CAP_PERFMON to kernel and user space
[upstream commit 980737282232b752bb14dab96d77665c15889c36] Introduce the CAP_PERFMON capability designed to secure system performance monitoring and observability operations so that CAP_PERFMON can assist CAP_SYS_ADMIN capability in its governing role for performance monitoring and observability subsystems. CAP_PERFMON hardens system security and integrity during performance monitoring and observability operations by decreasing attack surface that is available to a CAP_SYS_ADMIN privileged process [2]. Providing the access to system performance monitoring and observability operations under CAP_PERFMON capability singly, without the rest of CAP_SYS_ADMIN credentials, excludes chances to misuse the credentials and makes the operation more secure. Thus, CAP_PERFMON implements the principle of least privilege for performance monitoring and observability operations (POSIX IEEE 1003.1e: 2.2.2.39 principle of least privilege: A security design principle that states that a process or program be granted only those privileges (e.g., capabilities) necessary to accomplish its legitimate function, and only for the time that such privileges are actually required) CAP_PERFMON meets the demand to secure system performance monitoring and observability operations for adoption in security sensitive, restricted, multiuser production environments (e.g. HPC clusters, cloud and virtual compute environments), where root or CAP_SYS_ADMIN credentials are not available to mass users of a system, and securely unblocks applicability and scalability of system performance monitoring and observability operations beyond root and CAP_SYS_ADMIN use cases. CAP_PERFMON takes over CAP_SYS_ADMIN credentials related to system performance monitoring and observability operations and balances amount of CAP_SYS_ADMIN credentials following the recommendations in the capabilities man page [1] for CAP_SYS_ADMIN: "Note: this capability is overloaded; see Notes to kernel developers, below." For backward compatibility reasons access to system performance monitoring and observability subsystems of the kernel remains open for CAP_SYS_ADMIN privileged processes but CAP_SYS_ADMIN capability usage for secure system performance monitoring and observability operations is discouraged with respect to the designed CAP_PERFMON capability. Although the software running under CAP_PERFMON can not ensure avoidance of related hardware issues, the software can still mitigate these issues following the official hardware issues mitigation procedure [2]. The bugs in the software itself can be fixed following the standard kernel development process [3] to maintain and harden security of system performance monitoring and observability operations. [1] http://man7.org/linux/man-pages/man7/capabilities.7.html [2] https://www.kernel.org/doc/html/latest/process/embargoed-hardware-issues.html [3] https://www.kernel.org/doc/html/latest/admin-guide/security-bugs.html Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Acked-by: James Morris <jamorris@linux.microsoft.com> Acked-by: Serge E. Hallyn <serge@hallyn.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Igor Lubashev <ilubashe@akamai.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: intel-gfx@lists.freedesktop.org Cc: linux-doc@vger.kernel.org Cc: linux-man@vger.kernel.org Cc: linux-security-module@vger.kernel.org Cc: selinux@vger.kernel.org Link: http://lore.kernel.org/lkml/5590d543-82c6-490a-6544-08e6a5517db0@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Andrii Nakryiko
|
d1995b7ec0 |
bpf: Implement bpf_prog replacement for an active bpf_cgroup_link
[upstream commit 0c991ebc8c69d29b7fc44db17075c5aa5253e2ab] Add new operation (LINK_UPDATE), which allows to replace active bpf_prog from under given bpf_link. Currently this is only supported for bpf_cgroup_link, but will be extended to other kinds of bpf_links in follow-up patches. For bpf_cgroup_link, implemented functionality matches existing semantics for direct bpf_prog attachment (including BPF_F_REPLACE flag). User can either unconditionally set new bpf_prog regardless of which bpf_prog is currently active under given bpf_link, or, optionally, can specify expected active bpf_prog. If active bpf_prog doesn't match expected one, no changes are performed, old bpf_link stays intact and attached, operation returns a failure. cgroup_bpf_replace() operation is resolving race between auto-detachment and bpf_prog update in the same fashion as it's done for bpf_link detachment, except in this case update has no way of succeeding because of target cgroup marked as dying. So in this case error is returned. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200330030001.2312810-3-andriin@fb.com |
|
|
Andrii Nakryiko
|
531ecbde6a |
bpf: Implement bpf_link-based cgroup BPF program attachment
[upstream commit af6eea57437a830293eab56246b6025cc7d46ee7] Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com |
|
|
Andrey Ignatov
|
7e31561508 |
bpf: Support replacing cgroup-bpf program in MULTI mode
[upstream commit 7dd68b3279f1792103d12e69933db3128c6d416e] The common use-case in production is to have multiple cgroup-bpf programs per attach type that cover multiple use-cases. Such programs are attached with BPF_F_ALLOW_MULTI and can be maintained by different people. Order of programs usually matters, for example imagine two egress programs: the first one drops packets and the second one counts packets. If they're swapped the result of counting program will be different. It brings operational challenges with updating cgroup-bpf program(s) attached with BPF_F_ALLOW_MULTI since there is no way to replace a program: * One way to update is to detach all programs first and then attach the new version(s) again in the right order. This introduces an interruption in the work a program is doing and may not be acceptable (e.g. if it's egress firewall); * Another way is attach the new version of a program first and only then detach the old version. This introduces the time interval when two versions of same program are working, what may not be acceptable if a program is not idempotent. It also imposes additional burden on program developers to make sure that two versions of their program can co-exist. Solve the problem by introducing a "replace" mode in BPF_PROG_ATTACH command for cgroup-bpf programs being attached with BPF_F_ALLOW_MULTI flag. This mode is enabled by newly introduced BPF_F_REPLACE attach flag and bpf_attr.replace_bpf_fd attribute to pass fd of the old program to replace That way user can replace any program among those attached with BPF_F_ALLOW_MULTI flag without the problems described above. Details of the new API: * If BPF_F_REPLACE is set but replace_bpf_fd doesn't have valid descriptor of BPF program, BPF_PROG_ATTACH will return corresponding error (EINVAL or EBADF). * If replace_bpf_fd has valid descriptor of BPF program but such a program is not attached to specified cgroup, BPF_PROG_ATTACH will return ENOENT. BPF_F_REPLACE is introduced to make the user intent clear, since replace_bpf_fd alone can't be used for this (its default value, 0, is a valid fd). BPF_F_REPLACE also makes it possible to extend the API in the future (e.g. add BPF_F_BEFORE and BPF_F_AFTER if needed). Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Andrii Narkyiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/30cd850044a0057bdfcaaf154b7d2f39850ba813.1576741281.git.rdna@fb.com |
|
|
KP Singh
|
a642bd4275 |
bpf: Introduce BPF_PROG_TYPE_LSM
[upstream commit fc611f47f2188ade2b48ff6902d5cce8baac0c58] Introduce types and configs for bpf programs that can be attached to LSM hooks. The programs can be enabled by the config option CONFIG_BPF_LSM. Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Brendan Jackman <jackmanb@google.com> Reviewed-by: Florent Revest <revest@google.com> Reviewed-by: Thomas Garnier <thgarnie@google.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: James Morris <jamorris@linux.microsoft.com> Link: https://lore.kernel.org/bpf/20200329004356.27286-2-kpsingh@chromium.org |
|
|
Alexei Starovoitov
|
06fa64d2b1 |
bpf: Introduce dynamic program extensions
[upstream commit be8704ff07d2374bcc5c675526f95e70c6459683] Introduce dynamic program extensions. The users can load additional BPF functions and replace global functions in previously loaded BPF programs while these programs are executing. Global functions are verified individually by the verifier based on their types only. Hence the global function in the new program which types match older function can safely replace that corresponding function. This new function/program is called 'an extension' of old program. At load time the verifier uses (attach_prog_fd, attach_btf_id) pair to identify the function to be replaced. The BPF program type is derived from the target program into extension program. Technically bpf_verifier_ops is copied from target program. The BPF_PROG_TYPE_EXT program type is a placeholder. It has empty verifier_ops. The extension program can call the same bpf helper functions as target program. Single BPF_PROG_TYPE_EXT type is used to extend XDP, SKB and all other program types. The verifier allows only one level of replacement. Meaning that the extension program cannot recursively extend an extension. That also means that the maximum stack size is increasing from 512 to 1024 bytes and maximum function nesting level from 8 to 16. The programs don't always consume that much. The stack usage is determined by the number of on-stack variables used by the program. The verifier could have enforced 512 limit for combined original plus extension program, but it makes for difficult user experience. The main use case for extensions is to provide generic mechanism to plug external programs into policy program or function call chaining. BPF trampoline is used to track both fentry/fexit and program extensions because both are using the same nop slot at the beginning of every BPF function. Attaching fentry/fexit to a function that was replaced is not allowed. The opposite is true as well. Replacing a function that currently being analyzed with fentry/fexit is not allowed. The executable page allocated by BPF trampoline is not used by program extensions. This inefficiency will be optimized in future patches. Function by function verification of global function supports scalars and pointer to context only. Hence program extensions are supported for such class of global functions only. In the future the verifier will be extended with support to pointers to structures, arrays with sizes, etc. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200121005348.2769920-2-ast@kernel.org |
|
|
Alexei Starovoitov
|
9d896b57f6 |
bpf: Introduce function-by-function verification
[upstream commit 51c39bb1d5d105a02e29aa7960f0a395086e6342]
New llvm and old llvm with libbpf help produce BTF that distinguish global and
static functions. Unlike arguments of static function the arguments of global
functions cannot be removed or optimized away by llvm. The compiler has to use
exactly the arguments specified in a function prototype. The argument type
information allows the verifier validate each global function independently.
For now only supported argument types are pointer to context and scalars. In
the future pointers to structures, sizes, pointer to packet data can be
supported as well. Consider the following example:
static int f1(int ...)
{
...
}
int f3(int b);
int f2(int a)
{
f1(a) + f3(a);
}
int f3(int b)
{
...
}
int main(...)
{
f1(...) + f2(...) + f3(...);
}
The verifier will start its safety checks from the first global function f2().
It will recursively descend into f1() because it's static. Then it will check
that arguments match for the f3() invocation inside f2(). It will not descend
into f3(). It will finish f2() that has to be successfully verified for all
possible values of 'a'. Then it will proceed with f3(). That function also has
to be safe for all possible values of 'b'. Then it will start subprog 0 (which
is main() function). It will recursively descend into f1() and will skip full
check of f2() and f3(), since they are global. The order of processing global
functions doesn't affect safety, since all global functions must be proven safe
based on their arguments only.
Such function by function verification can drastically improve speed of the
verification and reduce complexity.
Note that the stack limit of 512 still applies to the call chain regardless whether
functions were static or global. The nested level of 8 also still applies. The
same recursion prevention checks are in place as well.
The type information and static/global kind is preserved after the verification
hence in the above example global function f2() and f3() can be replaced later
by equivalent functions with the same types that are loaded and verified later
without affecting safety of this main() program. Such replacement (re-linking)
of global functions is a subject of future patches.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200110064124.1760511-3-ast@kernel.org
|
|
|
Martin KaFai Lau
|
edb58b3ec7 |
bpf: Add BPF_FUNC_tcp_send_ack helper
[upstream commit 206057fe020ac5c037d5e2dd6562a9bd216ec765] Add a helper to send out a tcp-ack. It will be used in the later bpf_dctcp implementation that requires to send out an ack when the CE state changed. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200109004551.3900448-1-kafai@fb.com |
|
|
Martin KaFai Lau
|
e0e316fc1f |
bpf: Introduce BPF_MAP_TYPE_STRUCT_OPS
[upstream commit 85d33df357b634649ddbe0a20fd2d0fc5732c3cb]
The patch introduces BPF_MAP_TYPE_STRUCT_OPS. The map value
is a kernel struct with its func ptr implemented in bpf prog.
This new map is the interface to register/unregister/introspect
a bpf implemented kernel struct.
The kernel struct is actually embedded inside another new struct
(or called the "value" struct in the code). For example,
"struct tcp_congestion_ops" is embbeded in:
struct bpf_struct_ops_tcp_congestion_ops {
refcount_t refcnt;
enum bpf_struct_ops_state state;
struct tcp_congestion_ops data; /* <-- kernel subsystem struct here */
}
The map value is "struct bpf_struct_ops_tcp_congestion_ops".
The "bpftool map dump" will then be able to show the
state ("inuse"/"tobefree") and the number of subsystem's refcnt (e.g.
number of tcp_sock in the tcp_congestion_ops case). This "value" struct
is created automatically by a macro. Having a separate "value" struct
will also make extending "struct bpf_struct_ops_XYZ" easier (e.g. adding
"void (*init)(void)" to "struct bpf_struct_ops_XYZ" to do some
initialization works before registering the struct_ops to the kernel
subsystem). The libbpf will take care of finding and populating the
"struct bpf_struct_ops_XYZ" from "struct XYZ".
Register a struct_ops to a kernel subsystem:
1. Load all needed BPF_PROG_TYPE_STRUCT_OPS prog(s)
2. Create a BPF_MAP_TYPE_STRUCT_OPS with attr->btf_vmlinux_value_type_id
set to the btf id "struct bpf_struct_ops_tcp_congestion_ops" of the
running kernel.
Instead of reusing the attr->btf_value_type_id,
btf_vmlinux_value_type_id s added such that attr->btf_fd can still be
used as the "user" btf which could store other useful sysadmin/debug
info that may be introduced in the furture,
e.g. creation-date/compiler-details/map-creator...etc.
3. Create a "struct bpf_struct_ops_tcp_congestion_ops" object as described
in the running kernel btf. Populate the value of this object.
The function ptr should be populated with the prog fds.
4. Call BPF_MAP_UPDATE with the object created in (3) as
the map value. The key is always "0".
During BPF_MAP_UPDATE, the code that saves the kernel-func-ptr's
args as an array of u64 is generated. BPF_MAP_UPDATE also allows
the specific struct_ops to do some final checks in "st_ops->init_member()"
(e.g. ensure all mandatory func ptrs are implemented).
If everything looks good, it will register this kernel struct
to the kernel subsystem. The map will not allow further update
from this point.
Unregister a struct_ops from the kernel subsystem:
BPF_MAP_DELETE with key "0".
Introspect a struct_ops:
BPF_MAP_LOOKUP_ELEM with key "0". The map value returned will
have the prog _id_ populated as the func ptr.
The map value state (enum bpf_struct_ops_state) will transit from:
INIT (map created) =>
INUSE (map updated, i.e. reg) =>
TOBEFREE (map value deleted, i.e. unreg)
The kernel subsystem needs to call bpf_struct_ops_get() and
bpf_struct_ops_put() to manage the "refcnt" in the
"struct bpf_struct_ops_XYZ". This patch uses a separate refcnt
for the purose of tracking the subsystem usage. Another approach
is to reuse the map->refcnt and then "show" (i.e. during map_lookup)
the subsystem's usage by doing map->refcnt - map->usercnt to filter out
the map-fd/pinned-map usage. However, that will also tie down the
future semantics of map->refcnt and map->usercnt.
The very first subsystem's refcnt (during reg()) holds one
count to map->refcnt. When the very last subsystem's refcnt
is gone, it will also release the map->refcnt. All bpf_prog will be
freed when the map->refcnt reaches 0 (i.e. during map_free()).
Here is how the bpftool map command will look like:
[root@arch-fb-vm1 bpf]# bpftool map show
6: struct_ops name dctcp flags 0x0
key 4B value 256B max_entries 1 memlock 4096B
btf_id 6
[root@arch-fb-vm1 bpf]# bpftool map dump id 6
[{
"value": {
"refcnt": {
"refs": {
"counter": 1
}
},
"state": 1,
"data": {
"list": {
"next": 0,
"prev": 0
},
"key": 0,
"flags": 2,
"init": 24,
"release": 0,
"ssthresh": 25,
"cong_avoid": 30,
"set_state": 27,
"cwnd_event": 28,
"in_ack_event": 26,
"undo_cwnd": 29,
"pkts_acked": 0,
"min_tso_segs": 0,
"sndbuf_expand": 0,
"cong_control": 0,
"get_info": 0,
"name": [98,112,102,95,100,99,116,99,112,0,0,0,0,0,0,0
],
"owner": 0
}
}
}
]
Misc Notes:
* bpf_struct_ops_map_sys_lookup_elem() is added for syscall lookup.
It does an inplace update on "*value" instead returning a pointer
to syscall.c. Otherwise, it needs a separate copy of "zero" value
for the BPF_STRUCT_OPS_STATE_INIT to avoid races.
* The bpf_struct_ops_map_delete_elem() is also called without
preempt_disable() from map_delete_elem(). It is because
the "->unreg()" may requires sleepable context, e.g.
the "tcp_unregister_congestion_control()".
* "const" is added to some of the existing "struct btf_func_model *"
function arg to avoid a compiler warning caused by this patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003505.3855919-1-kafai@fb.com
|
|
|
Martin KaFai Lau
|
50cc9417c1 |
bpf: Introduce BPF_PROG_TYPE_STRUCT_OPS
[upstream commit 27ae7997a66174cb8afd6a75b3989f5e0c1b9e5a] This patch allows the kernel's struct ops (i.e. func ptr) to be implemented in BPF. The first use case in this series is the "struct tcp_congestion_ops" which will be introduced in a latter patch. This patch introduces a new prog type BPF_PROG_TYPE_STRUCT_OPS. The BPF_PROG_TYPE_STRUCT_OPS prog is verified against a particular func ptr of a kernel struct. The attr->attach_btf_id is the btf id of a kernel struct. The attr->expected_attach_type is the member "index" of that kernel struct. The first member of a struct starts with member index 0. That will avoid ambiguity when a kernel struct has multiple func ptrs with the same func signature. For example, a BPF_PROG_TYPE_STRUCT_OPS prog is written to implement the "init" func ptr of the "struct tcp_congestion_ops". The attr->attach_btf_id is the btf id of the "struct tcp_congestion_ops" of the _running_ kernel. The attr->expected_attach_type is 3. The ctx of BPF_PROG_TYPE_STRUCT_OPS is an array of u64 args saved by arch_prepare_bpf_trampoline that will be done in the next patch when introducing BPF_MAP_TYPE_STRUCT_OPS. "struct bpf_struct_ops" is introduced as a common interface for the kernel struct that supports BPF_PROG_TYPE_STRUCT_OPS prog. The supporting kernel struct will need to implement an instance of the "struct bpf_struct_ops". The supporting kernel struct also needs to implement a bpf_verifier_ops. During BPF_PROG_LOAD, bpf_struct_ops_find() will find the right bpf_verifier_ops by searching the attr->attach_btf_id. A new "btf_struct_access" is also added to the bpf_verifier_ops such that the supporting kernel struct can optionally provide its own specific check on accessing the func arg (e.g. provide limited write access). After btf_vmlinux is parsed, the new bpf_struct_ops_init() is called to initialize some values (e.g. the btf id of the supporting kernel struct) and it can only be done once the btf_vmlinux is available. The R0 checks at BPF_EXIT is excluded for the BPF_PROG_TYPE_STRUCT_OPS prog if the return type of the prog->aux->attach_func_proto is "void". Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200109003503.3855825-1-kafai@fb.com |
|
|
Alexei Starovoitov
|
1019781c9b |
bpf: Support attaching tracing BPF program to other BPF programs
[upstream commit 5b92a28aae4dd0f88778d540ecfdcdaec5a41723] Allow FENTRY/FEXIT BPF programs to attach to other BPF programs of any type including their subprograms. This feature allows snooping on input and output packets in XDP, TC programs including their return values. In order to do that the verifier needs to track types not only of vmlinux, but types of other BPF programs as well. The verifier also needs to translate uapi/linux/bpf.h types used by networking programs into kernel internal BTF types used by FENTRY/FEXIT BPF programs. In some cases LLVM optimizations can remove arguments from BPF subprograms without adjusting BTF info that LLVM backend knows. When BTF info disagrees with actual types that the verifiers sees the BPF trampoline has to fallback to conservative and treat all arguments as u64. The FENTRY/FEXIT program can still attach to such subprograms, but it won't be able to recognize pointer types like 'struct sk_buff *' and it won't be able to pass them to bpf_skb_output() for dumping packets to user space. The FENTRY/FEXIT program would need to use bpf_probe_read_kernel() instead. The BPF_PROG_LOAD command is extended with attach_prog_fd field. When it's set to zero the attach_btf_id is one vmlinux BTF type ids. When attach_prog_fd points to previously loaded BPF program the attach_btf_id is BTF type id of main function or one of its subprograms. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191114185720.1641606-18-ast@kernel.org |
|
|
Daniel Borkmann
|
10cffa1df7 |
bpf: Add probe_read_{user, kernel} and probe_read_{user, kernel}_str helpers
[upstream commit 6ae08ae3dea2cfa03dd3665a3c8475c2d429ef47]
The current bpf_probe_read() and bpf_probe_read_str() helpers are broken
in that they assume they can be used for probing memory access for kernel
space addresses /as well as/ user space addresses.
However, plain use of probe_kernel_read() for both cases will attempt to
always access kernel space address space given access is performed under
KERNEL_DS and some archs in-fact have overlapping address spaces where a
kernel pointer and user pointer would have the /same/ address value and
therefore accessing application memory via bpf_probe_read{,_str}() would
read garbage values.
Lets fix BPF side by making use of recently added 3d7081822f7f ("uaccess:
Add non-pagefault user-space read functions"). Unfortunately, the only way
to fix this status quo is to add dedicated bpf_probe_read_{user,kernel}()
and bpf_probe_read_{user,kernel}_str() helpers. The bpf_probe_read{,_str}()
helpers are kept as-is to retain their current behavior.
The two *_user() variants attempt the access always under USER_DS set, the
two *_kernel() variants will -EFAULT when accessing user memory if the
underlying architecture has non-overlapping address ranges, also avoiding
throwing the kernel warning via 00c42373d397 ("x86-64: add warning for
non-canonical user access address dereferences").
Fixes: a5e8c07059d0 ("bpf: add bpf_probe_read_str helper")
Fixes: 2541517c32be ("tracing, perf: Implement BPF programs attached to kprobes")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/796ee46e948bc808d54891a1108435f8652c6ca4.1572649915.git.daniel@iogearbox.net
|
|
|
Zhiping du
|
412c87e3ca |
bpf: Replace prog_raw_tp+btf_id with prog_tracing
[upstream commit f1b9509c2fb0ef4db8d22dac9aef8e856a5d81f6] The bpf program type raw_tp together with 'expected_attach_type' was the most appropriate api to indicate BTF-enabled raw_tp programs. But during development it became apparent that 'expected_attach_type' cannot be used and new 'attach_btf_id' field had to be introduced. Which means that the information is duplicated in two fields where one of them is ignored. Clean it up by introducing new program type where both 'expected_attach_type' and 'attach_btf_id' fields have specific meaning. In the future 'expected_attach_type' will be extended with other attach points that have similar semantics to raw_tp. This patch is replacing BTF-enabled BPF_PROG_TYPE_RAW_TRACEPOINT with prog_type = BPF_RPOG_TYPE_TRACING expected_attach_type = BPF_TRACE_RAW_TP attach_btf_id = btf_id of raw tracepoint inside the kernel Future patches will add expected_attach_type = BPF_TRACE_FENTRY or BPF_TRACE_FEXIT where programs have the same input context and the same helpers, but different attach points. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191030223212.953010-2-ast@kernel.org |
|
|
Alexei Starovoitov
|
a9ebfff2c0 |
bpf: Add attach_btf_id attribute to program load
Add attach_btf_id attribute to prog_load command. It's similar to existing expected_attach_type attribute which is used in several cgroup based program types. Unfortunately expected_attach_type is ignored for tracing programs and cannot be reused for new purpose. Hence introduce attach_btf_id to verify bpf programs against given in-kernel BTF type id at load time. It is strictly checked to be valid for raw_tp programs only. In a later patches it will become: btf_id == 0 semantics of existing raw_tp progs. btd_id > 0 raw_tp with BTF and additional type safety. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-5-ast@kernel.org |