xuyanghang
/
xiuos
forked from xuos/xiuos
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
xiuos/Ubiquitous/XiZi_IIoT/resources/ethernet/LwIP/arch/lwipopts.h

584 lines
15 KiB
C
Raw Permalink Blame History

/**
******************************************************************************
* @file lwipopts.h
* @author MCD Application Team
* @version V1.1.0
* @date 31-July-2013
* @brief lwIP Options Configuration.
* This file is based on Utilities\lwip_v1.4.1\src\include\lwip\opt.h
* and contains the lwIP configuration for the STM32F4x7 demonstration.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
#ifndef __LWIPOPTS_H__
#define __LWIPOPTS_H__
#include <xsconfig.h>
/* ---------- Debug options ---------- */
#ifndef LWIP_DEBUG
#define LWIP_DEBUG 1
// #define LWIP_SOCKET_DEBUG
// #define LWIP_SOCKETS_DEBUG
// #define LWIP_TCPIP_DEBUG
// #define LWIP_MEMP_DEBUG
// #define LWIP_PBUF_DEBUG
// #define LWIP_TCP_INPUT_DEBUG
// #define LWIP_TCP_OUTPUT_DEBUG
// #define LWIP_NETIF_DEBUG
// #define LWIP_ETHARP_DEBUG
// #define LWIP_API_MSG_DEBUG
#endif
#ifdef LWIP_DEBUG
#ifdef LWIP_SYS_DEBUG
#define SYS_DEBUG LWIP_DBG_ON
#else
#define SYS_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_ETHARP_DEBUG
#define ETHARP_DEBUG LWIP_DBG_ON
#else
#define ETHARP_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_PPP_DEBUG
#define PPP_DEBUG LWIP_DBG_ON
#else
#define PPP_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_MEM_DEBUG
#define MEM_DEBUG LWIP_DBG_ON
#else
#define MEM_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_MEMP_DEBUG
#define MEMP_DEBUG LWIP_DBG_ON
#else
#define MEMP_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_PBUF_DEBUG
#define PBUF_DEBUG LWIP_DBG_ON
#else
#define PBUF_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_API_LIB_DEBUG
#define API_LIB_DEBUG LWIP_DBG_ON
#else
#define API_LIB_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_API_MSG_DEBUG
#define API_MSG_DEBUG LWIP_DBG_ON
#else
#define API_MSG_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_TCPIP_DEBUG
#define TCPIP_DEBUG LWIP_DBG_ON
#else
#define TCPIP_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_NETIF_DEBUG
#define NETIF_DEBUG LWIP_DBG_ON
#else
#define NETIF_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_SOCKETS_DEBUG
#define SOCKETS_DEBUG LWIP_DBG_ON
#else
#define SOCKETS_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_DNS_DEBUG
#define DNS_DEBUG LWIP_DBG_ON
#else
#define DNS_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_AUTOIP_DEBUG
#define AUTOIP_DEBUG LWIP_DBG_ON
#else
#define AUTOIP_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_DHCP_DEBUG
#define DHCP_DEBUG LWIP_DBG_ON
#else
#define DHCP_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_IP_DEBUG
#define IP_DEBUG LWIP_DBG_ON
#else
#define IP_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_IP_REASS_DEBUG
#define IP_REASS_DEBUG LWIP_DBG_ON
#else
#define IP_REASS_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_ICMP_DEBUG
#define ICMP_DEBUG LWIP_DBG_ON
#else
#define ICMP_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_IGMP_DEBUG
#define IGMP_DEBUG LWIP_DBG_ON
#else
#define IGMP_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_UDP_DEBUG
#define UDP_DEBUG LWIP_DBG_ON
#else
#define UDP_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_TCP_DEBUG
#define TCP_DEBUG LWIP_DBG_ON
#else
#define TCP_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_TCP_INPUT_DEBUG
#define TCP_INPUT_DEBUG LWIP_DBG_ON
#else
#define TCP_INPUT_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_TCP_OUTPUT_DEBUG
#define TCP_OUTPUT_DEBUG LWIP_DBG_ON
#else
#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_TCP_RTO_DEBUG
#define TCP_RTO_DEBUG LWIP_DBG_ON
#else
#define TCP_RTO_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_TCP_CWND_DEBUG
#define TCP_CWND_DEBUG LWIP_DBG_ON
#else
#define TCP_CWND_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_TCP_WND_DEBUG
#define TCP_WND_DEBUG LWIP_DBG_ON
#else
#define TCP_WND_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_TCP_FR_DEBUG
#define TCP_FR_DEBUG LWIP_DBG_ON
#else
#define TCP_FR_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_TCP_QLEN_DEBUG
#define TCP_QLEN_DEBUG LWIP_DBG_ON
#else
#define TCP_QLEN_DEBUG LWIP_DBG_OFF
#endif
#ifdef LWIP_TCP_RST_DEBUG
#define TCP_RST_DEBUG LWIP_DBG_ON
#else
#define TCP_RST_DEBUG LWIP_DBG_OFF
#endif
#endif /* LWIP_DEBUG */
#define LWIP_TIMEVAL_PRIVATE 0
#define LWIP_NO_UNISTD_H 0
#define LWIP_NO_STDDEF_H 0
#define LWIP_NO_STDINT_H 0
#define LWIP_NO_INTTYPES_H 0
#define LWIP_NO_LIMITS_H 0
#define LWIP_NO_CTYPE_H 0
#define LWIP_SOCKET_SELECT 1
#define LWIP_SOCKET_POLL 1
#define LWIP_DHCP_DOES_ACD_CHECK 0
/**
* SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain
* critical regions during buffer allocation, deallocation and memory
* allocation and deallocation.
*/
#define SYS_LIGHTWEIGHT_PROT 1
/**
* NO_SYS==1: Provides VERY minimal functionality. Otherwise,
* use lwIP facilities.
*/
#define NO_SYS 0
/**
* NO_SYS_NO_TIMERS==1: Drop support for sys_timeout when NO_SYS==1
* Mainly for compatibility to old versions.
*/
#define NO_SYS_NO_TIMERS 0
/* ---------- Memory options ---------- */
/* MEM_ALIGNMENT: should be set to the alignment of the CPU for which
lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2
byte alignment -> define MEM_ALIGNMENT to 2. */
#ifndef RISCV_LWIP
#define MEM_ALIGNMENT 4
#else
#define MEM_ALIGNMENT 8
#endif
/* MEM_SIZE: the size of the heap memory. If the application will send
a lot of data that needs to be copied, this should be set high. */
#ifndef RISCV_LWIP
#define MEM_SIZE (64 * 1024)
#else
#define MEM_SIZE (32 * 1024)
#endif
/* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application
sends a lot of data out of ROM (or other static memory), this
should be set high. */
#define MEMP_NUM_PBUF 32
/* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
per active UDP "connection". */
#define MEMP_NUM_UDP_PCB 32
/* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP
connections. */
#define MEMP_NUM_TCP_PCB 32
#define MEMP_NUM_RAW_PCB 32
#define MEMP_NUM_REASSDATA 32
#define MEMP_NUM_NETCONN 32
/* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP
connections. */
#define MEMP_NUM_TCP_PCB_LISTEN 32
/* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP
segments. */
#define MEMP_NUM_TCP_SEG 256
/* MEMP_NUM_SYS_TIMEOUT: the number of simulateously active
timeouts. */
// #define MEMP_NUM_SYS_TIMEOUT 6
#define MEMP_NUM_SYS_TIMEOUT (LWIP_TCP + IP_REASSEMBLY + LWIP_ARP + (2 * LWIP_DHCP) + LWIP_AUTOIP + LWIP_IGMP + LWIP_DNS + PPP_SUPPORT + (LWIP_IPV6 ? (1 + (2 * LWIP_IPV6)) : 0))
/* ---------- Pbuf options ---------- */
/* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */
#define PBUF_POOL_SIZE 255
/* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */
// #define PBUF_POOL_BUFSIZE 1024
#define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS + 40 + PBUF_LINK_ENCAPSULATION_HLEN + PBUF_LINK_HLEN)
/* ---------- ARP options ---------- */
#define LWIP_ARP 1
#define ARP_TABLE_SIZE 10
#define ARP_QUEUEING 1
/* ---------- TCP options ---------- */
#define LWIP_TCP 1
#define TCP_TTL 255
/* Controls if TCP should queue segments that arrive out of
order. Define to 0 if your device is low on memory. */
#define TCP_QUEUE_OOSEQ 0
/* TCP Maximum segment size. */
#define TCP_MSS (1500 - 40) /* TCP_MSS = (Ethernet MTU - IP header size - TCP header size) */
/* TCP sender buffer space (bytes). */
#define TCP_SND_BUF (11 * TCP_MSS)
/* TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least
as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work. */
#define TCP_SND_QUEUELEN (8 * TCP_SND_BUF / TCP_MSS)
/* TCP receive window. */
#define TCP_WND 8192
// #define TCP_WND (12 * TCP_MSS)
/* Maximum number of retransmissions of data segments. */
#define TCP_MAXRTX 12
/* Maximum number of retransmissions of SYN segments. */
#define TCP_SYNMAXRTX 4
/**
* LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT
* options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set
* in seconds. (does not require sockets.c, and will affect tcp.c)
*/
#ifndef LWIP_TCP_KEEPALIVE
#define LWIP_TCP_KEEPALIVE 1
#endif
/**
* LWIP_NETIF_HOSTNAME==1: Support netif hostname
*/
#ifndef LWIP_NETIF_HOSTNAME
#define LWIP_NETIF_HOSTNAME 1
#endif
/**
* LWIP_NETIF_API==1: Support netif api (in netifapi.c)
*/
#ifndef LWIP_NETIF_API
#define LWIP_NETIF_API 1
#endif
/**
* LWIP_SO_SNDTIMEO==1: Enable send timeout for sockets/netconns and
* SO_SNDTIMEO processing.
*/
#ifndef LWIP_SO_SNDTIMEO
#define LWIP_SO_SNDTIMEO 1
#endif
/**
* LWIP_SO_RCVTIMEO==1: Enable receive timeout for sockets/netconns and
* SO_RCVTIMEO processing.
*/
#ifndef LWIP_SO_RCVTIMEO
#define LWIP_SO_RCVTIMEO 1
#endif
/**
* LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing.
*/
#ifndef LWIP_SO_RCVBUF
#define LWIP_SO_RCVBUF 1
#endif
/**
* If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize.
*/
#ifndef RECV_BUFSIZE_DEFAULT
#define RECV_BUFSIZE_DEFAULT 8192
#endif
/* ---------- ICMP options ---------- */
#define LWIP_ICMP 1
/* ---------- UDP options ---------- */
#define LWIP_UDP 1
#define UDP_TTL 255
/* ---------- Statistics options ---------- */
#define LWIP_PROVIDE_ERRNO 1
/* ---------- link callback options ---------- */
/* LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface
* whenever the link changes (i.e., link down)
*/
#define LWIP_NETIF_LINK_CALLBACK 0
/*
--------------------------------------
---------- Checksum options ----------
--------------------------------------
*/
/*
The STM32F4x7 allows computing and verifying the IP, UDP, TCP and ICMP checksums by hardware:
- To use this feature let the following define uncommented.
- To disable it and process by CPU comment the the checksum.
*/
// #define CHECKSUM_BY_HARDWARE
#ifdef CHECKSUM_BY_HARDWARE
/* CHECKSUM_GEN_IP==0: Generate checksums by hardware for outgoing IP packets.*/
#define CHECKSUM_GEN_IP 0
/* CHECKSUM_GEN_UDP==0: Generate checksums by hardware for outgoing UDP packets.*/
#define CHECKSUM_GEN_UDP 0
/* CHECKSUM_GEN_TCP==0: Generate checksums by hardware for outgoing TCP packets.*/
#define CHECKSUM_GEN_TCP 0
/* CHECKSUM_CHECK_IP==0: Check checksums by hardware for incoming IP packets.*/
#define CHECKSUM_CHECK_IP 0
/* CHECKSUM_CHECK_UDP==0: Check checksums by hardware for incoming UDP packets.*/
#define CHECKSUM_CHECK_UDP 0
/* CHECKSUM_CHECK_TCP==0: Check checksums by hardware for incoming TCP packets.*/
#define CHECKSUM_CHECK_TCP 0
/* CHECKSUM_CHECK_ICMP==0: Check checksums by hardware for incoming ICMP packets.*/
#define CHECKSUM_GEN_ICMP 0
#else
/* CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets.*/
#define CHECKSUM_GEN_IP 1
/* CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets.*/
#define CHECKSUM_GEN_UDP 1
/* CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets.*/
#define CHECKSUM_GEN_TCP 1
/* CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets.*/
#define CHECKSUM_CHECK_IP 1
/* CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets.*/
#define CHECKSUM_CHECK_UDP 1
/* CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets.*/
#define CHECKSUM_CHECK_TCP 1
/* CHECKSUM_CHECK_ICMP==1: Check checksums by software for incoming ICMP packets.*/
#define CHECKSUM_GEN_ICMP 1
#endif
/*
----------------------------------------------
---------- Sequential layer options ----------
----------------------------------------------
*/
/**
* LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c)
*/
// #ifndef RISCV_LWIP
// #define LWIP_NETCONN 1
// #else
#define LWIP_NETCONN 1
// #endif
/*
------------------------------------
---------- Socket options ----------
------------------------------------
*/
/**
* LWIP_SOCKET==1: Enable Socket API (require to use sockets.c)
*/
#define LWIP_SOCKET 1
/**
* LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing.
*/
#define LWIP_SO_RCVBUF 1
/**
* LWIP_SO_SNDTIMEO==1: Enable send timeout for sockets/netconns and
* SO_SNDTIMEO processing.
*/
#ifndef LWIP_SO_SNDTIMEO
#define LWIP_SO_SNDTIMEO 1
#endif
/**
* LWIP_SO_RCVTIMEO==1: Enable receive timeout for sockets/netconns and
* SO_RCVTIMEO processing.
*/
#ifndef LWIP_SO_RCVTIMEO
#define LWIP_SO_RCVTIMEO 1
#endif
/**
* LWIP_SO_LINGER==1: Enable SO_LINGER processing.
*/
// #define LWIP_SO_LINGER 1
/* ---------- IP options ---------- */
/* Define IP_FORWARD to 1 if you wish to have the ability to forward
IP packets across network interfaces. If you are going to run lwIP
on a device with only one network interface, define this to 0. */
#define IP_FORWARD 0
/* IP reassembly and segmentation.These are orthogonal even
* if they both deal with IP fragments */
#ifdef LWIP_REASSEMBLY_FRAG
#define IP_REASSEMBLY 1
#define IP_FRAG 1
#define IP_REASS_MAX_PBUFS 10
#define MEMP_NUM_REASSDATA 10
#else
#define IP_REASSEMBLY 0
#define IP_FRAG 0
#endif
/* ---------- ICMP options ---------- */
#define ICMP_TTL 255
/* ---------- DHCP options ---------- */
/* Define LWIP_DHCP to 1 if you want DHCP configuration of
interfaces. */
#define LWIP_DHCP 0
/* 1 if you want to do an ARP check on the offered address
(recommended). */
#define DHCP_DOES_ARP_CHECK (LWIP_DHCP)
/* ---------- AUTOIP options ------- */
#define LWIP_AUTOIP 0
#define LWIP_DHCP_AUTOIP_COOP (LWIP_DHCP && LWIP_AUTOIP)
#define LWIP_UDPLITE 0
#define UDP_TTL 255
/* ---------- Statistics options ---------- */
#define LWIP_STATS 1
#define LWIP_STATS_DISPLAY 1
/*
---------------------------------
---------- OS options ----------
---------------------------------
*/
#define DEFAULT_RAW_RECVMBOX_SIZE 8
#define DEFAULT_UDP_RECVMBOX_SIZE 8
#define DEFAULT_TCP_RECVMBOX_SIZE 8
#define DEFAULT_ACCEPTMBOX_SIZE 12
#define DEFAULT_THREAD_PRIO 20
#define DEFAULT_THREAD_STACKSIZE 2048
#define TCPIP_THREAD_NAME "tcp"
#define TCPIP_THREAD_STACKSIZE 4096
#define TCPIP_MBOX_SIZE 16
#define TCPIP_THREAD_PRIO 30
/*
----------------------------------------
---------- Lwip Debug options ----------
----------------------------------------
*/
#define LWIP_IPV4 1
#define LWIP_RAW 1
#define LWIP_DNS 1
#if LWIP_DNS
#define LWIP_RAND rand
#endif
#ifndef nfds_t
typedef unsigned int nfds_t;
#endif
#define MEMP_LIB_MALLOC 1
#define MEMP_MEM_MALLOC 1
#define lw_print KPrintf
#define lw_error KPrintf
#define lw_notice KPrintf
#endif /* __LWIPOPTS_H__ */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Reference in New Issue View Git Blame Copy Permalink