xiuos/APP_Framework/lib/JerryScript/jerryscript/targets/nuttx-stm32f4

About

This folder contains files to run JerryScript on STM32F4-Discovery board with NuttX

How to build

1. Setup the build environment for STM32F4-Discovery board

Clone the necessary projects into a jerry-nuttx directory. The last tested working version of NuttX is 9.0.

# Create a base folder for all the projects.
mkdir jerry-nuttx && cd jerry-nuttx

git clone https://github.com/jerryscript-project/jerryscript.git
git clone https://bitbucket.org/nuttx/nuttx.git -b releases/9.0
git clone https://bitbucket.org/nuttx/apps.git -b releases/9.0
git clone https://github.com/texane/stlink.git -b v1.5.1-patch

The following directory structure is created after these commands:

jerry-nuttx
  + apps
  + jerryscript
  |  + targets
  |      + nuttx-stm32f4
  + nuttx
  + stlink

2. Build JerryScript for NuttX

Build JerryScript as a static library using the NuttX folder as sysroot. The created static libraries will be used later by NuttX.

# Assuming you are in jerry-nuttx folder.
jerryscript/tools/build.py \
    --clean \
    --lto=OFF \
    --jerry-cmdline=OFF \
    --jerry-math=ON \
    --amalgam=ON \
    --mem-heap=70 \
    --profile=es.next \
    --compile-flag="--sysroot=${PWD}/nuttx" \
    --toolchain=${PWD}/jerryscript/cmake/toolchain_mcu_stm32f4.cmake

3. Copy JerryScript's application files to NuttX

After creating the static libs (see previous step), it is needed to move the JerryScript application files to the NuttX's interpreter path.

# Assuming you are in jerry-nuttx folder.
mkdir -p apps/interpreters/jerryscript
cp jerryscript/targets/nuttx-stm32f4/* apps/interpreters/jerryscript/

# Or more simply:
# ln -s jerryscript/targets/nuttx-stm32f4 apps/interpreters/jerryscript

4. Configure NuttX

NuttX requires configuration first. The configuration creates a .config file in the root folder of NuttX that has all the necessary options for the build.

# Assuming you are in jerry-nuttx folder.
cd nuttx/tools

# Configure NuttX to use USB console shell.
./configure.sh stm32f4discovery/usbnsh

By default, JerryScript is not enabled, so it is needed to modify the configuration file.

4.1 Enable JerryScript without user interaction

# Assuming you are in jerry-nuttx folder.
sed --in-place "s/CONFIG_HOST_WINDOWS/# CONFIG_HOST_WINDOWS/g" nuttx/.config
sed --in-place "s/CONFIG_WINDOWS_CYGWIN/# CONFIG_WINDOWS_CYGWIN/g" nuttx/.config
sed --in-place "s/CONFIG_TOOLCHAIN_WINDOWS/# CONFIG_TOOLCHAIN_WINDOWS/g" nuttx/.config

cat >> nuttx/.config << EOL
CONFIG_HOST_LINUX=y
CONFIG_ARCH_FPU=y
CONFIG_JERRYSCRIPT=y
CONFIG_JERRYSCRIPT_PRIORITY=100
CONFIG_JERRYSCRIPT_STACKSIZE=16384
EOL

4.2 Enable JerryScript using kconfig-frontend

kconfig-frontend could be useful if there are another options that should be enabled or disabled in NuttX.

4.2.1 Install kconfig-frontend

# Assuming you are in jerry-nuttx folder.
git clone https://bitbucket.org/nuttx/tools.git nuttx-tools
cd nuttx-tools/kconfig-frontends

./configure \
    --disable-nconf \
    --disable-gconf \
    --disable-qconf \
    --disable-shared \
    --enable-static \
    --prefix=${PWD}/install

make
sudo make install

# Add the install folder to PATH
PATH=$PATH:${PWD}/install/bin

4.2.2 Enable JerryScript

# Assuming you are in jerry-nuttx folder.
# Might be required to run `make menuconfig` twice.
make -C nuttx menuconfig

• Change Build Setup -> Build Host Platform to Linux
• Enable System Type -> FPU support
• Enable JerryScript Application Configuration -> Interpreters -> JerryScript

5. Build NuttX

# Assuming you are in jerry-nuttx folder.
make -C nuttx

6. Flash the device

Connect Mini-USB for power supply and connect Micro-USB for NSH console.

# Assuming you are in jerry-nuttx folder.
make -C stlink release

sudo stlink/build/Release/st-flash write nuttx/nuttx.bin 0x8000000

Running JerryScript

You can use minicom for terminal program, or any other you may like, but set baud rate to 115200.

sudo minicom --device=/dev/ttyACM0 --baud=115200

You may have to press RESET on the board and press Enter keys on the console several times to make nsh prompt to appear.

If the prompt shows like this,

NuttShell (NSH)
               nsh>
                    nsh>
                         nsh>

please set Add Carriage Ret option by CTRL-A > Z > U at the console, if you're using minicom.

Run jerry with javascript file(s)

NuttShell (NSH)
nsh> jerry full_path/any.js

Without argument it prints:

nsh> jerry
No input files, running a hello world demo:
Hello world 5 times from JerryScript