* Implemented AuditUtils.actor.cpp
Moved AuditUtils to fdbserver/
* Persist AuditStorageState.
* Passed persisted AuditStorageState test.
* Added audit_storage_error to indicate a corruption is caught.
Throw/Send audit_storage_error when there is a data corruption.
Added doAuditStorage() for resuming Audit.
* Load and resume AuditStorage when DD restarts.
* Generate audit id monotonically.
* Fixed minor issue AuditId/Type was not set.
* Adding getLatestAuditStates.
* Improved persisted errors and added AuditStorageCommand.actor.cpp for
fdbcli.
* Added `audit_storage` fdbcli command.
* fmt.
* Fixed null shared_ptr issue.
* Improve audit data.
* Change DDAuditFailed to SevWarn.
* Sev.
* set SERVE_AUDIT_STORAGE_PARALLELISM to 1.
* Moved AuditUtils* to fdbclient/.
* Added getAuditStatus fdbcli command.
* Refactor audit storage fdb cli commands.
* Added auditStorage in sim.
* Cleanup.
* Resolved comments.
* Resolved comments.
* Added SystemData for metadata audit.
Refactored audit workflow to make sure all sub-tasks are executed w/o
early exit.
* Improvements.
* Persisted Failed state after too many retries.
* Added retryCount for resumeAuditStorage().
* resolving conflict.
* Resolved conflicts.
* allow-merged-to-run
* add timeout to audit client
* fmt
* validate replica
* add audit serverKey
* address comments and fmt
* fix audit_storage_exceeded_request_limit
* fix segfault in getLatestAuditStatesImpl
* fix bugs
* remove timeout from workload
* fix bugs
* audit local view of shard assignment
* fmt
* fix-stuck-issue-and-make-dd-audit-storage-self-retry
* fix timeout
* fix timeout
* fix bugs and cleanup
* fix nit
* change name state to coreState for audit metadata
* address comments
* code clean
* fmt
* setup debug
* cleanup
* clean up
* code cleanup
* code clean
* remove tmp file
* fmt
* trace portion of shards that of anonymous physical shard
* remove unnecessary actor cleanup
* do not give up when tr is too old
* address commits
* refactor
* clean
* fmt
* fix-command-help-text
* fix-auditstate-restore-and-enable-restore-to-metadata-audit
* address comments
* fmrt
* debug and improve efficient of resume audit
* small change
* fix audit cli
* bypass completed audit when dd restart
* fix auditStorageCommandActor
* make mismatch key range more visable
* address comments
* make local shard metadata check can make progress by retries
* address comments
* address comments
* partition location metadata validation by range and server
* unset MIN_TRACE_SEVERITY
* address comments and SS auto proceed until failed then notify dd
* persistNewAuditState should checkMoveKeysLock
* audit storage location metadata partitioned by range and move shard assignment history def to the end of SS structure
* code cleanup
* fix error message in metadata validation
* fix registerAuditsForShardAssignmentHistoryCollection input for local shard validation
* add comments to code and add guard to make sure the SS audit does not proceeds automatically for many times without being notified by DD --- to support audit cancellation later
* fix coalesceRangeList
* replace rangeOverlapping func with operator and use struct instead of complicated type for return value of getKeyServer/serverKey/shardInfo
* simplify shard assignment history
* shardAssignmentRecordRequests should be unorder_map
* address comments, make trackShardAssignment simple, make anyChildAuditFailed cover all audit children, keep only one audit actor run at a time on each SS
* only run validate shard info once at a time, other audit type does not have this limitation
---------
Co-authored-by: He Liu <heliu05023@gmail.com>
Co-authored-by: He Liu <heliu@apple.com>
Co-authored-by: Zhe Wang <zhewang@Zhes-Laptop.local>
Right now this only allows one server address being excluded. This is useful
when the database is unavailable but we want the recruitment to skip some
particular processes.
Manually tested the concept works with a loopback cluster.
* Implemented AuditUtils.actor.cpp
Moved AuditUtils to fdbserver/
* Persist AuditStorageState.
* Passed persisted AuditStorageState test.
* Added audit_storage_error to indicate a corruption is caught.
Throw/Send audit_storage_error when there is a data corruption.
Added doAuditStorage() for resuming Audit.
* Load and resume AuditStorage when DD restarts.
* Generate audit id monotonically.
* Fixed minor issue AuditId/Type was not set.
* Adding getLatestAuditStates.
* Improved persisted errors and added AuditStorageCommand.actor.cpp for
fdbcli.
* Added `audit_storage` fdbcli command.
* fmt.
* Fixed null shared_ptr issue.
* Improve audit data.
* Change DDAuditFailed to SevWarn.
* Sev.
* set SERVE_AUDIT_STORAGE_PARALLELISM to 1.
* Moved AuditUtils* to fdbclient/.
* Added getAuditStatus fdbcli command.
* Refactor audit storage fdb cli commands.
* Added auditStorage in sim.
* Cleanup.
* Resolved comments.
* Resolved comments.
* Test disabling audit for sims.
* Cleanup.
Co-authored-by: He Liu <heliu@apple.com>
See the comment contained in this commit. This bug could only manifest
under a specific set of circumstances:
1. A coordinator change is started
2. The coordinator change succeeds, but its action of clearing
`previousCoordinatorsKey` is delayed.
3. A minority of `ConfigNode`s have an old state of the configuration
database, compared to the majority.
4. A `ConfigNode` in the majority dies and permanently loses data.
5. A long delay occurs on the `PaxosConfigConsumer` when it tries to
read the latest changes from the `ConfigNode`s.
In the above circumstances, the `ConfigBroadcaster` could incorrectly
send a snapshot of an old state of the configuration database to a
majority of `ConfigNode`s. This would cause new, durable, and
acknowledged commit data to be overwritten.
Note that this bug only affects the configuration database (used for
knob storage). It does not affect the normal keyspace.
The simulator tracks only active processes. Rebooted or killed processes
are removed from the list of processes, and only get added back when the
process is rebooted and starts up again. This causes a problem for the
`RebootProcessAndSwitch` kill type, which wants to simultaneously reboot
all machines in a cluster and change their cluster file. If a machine is
currently being rebooted, it will miss the reboot process and switch
command.
The fix is to add a check when a process is being started in simulation.
If the process has had its cluster file changed and the cluster is in a
state where all processes should have had their cluster files reverted
to the original value, the simulator will now send a
`RebootProcessAndSwitch` signal right when the process is started. This
will cause an extra reboot, but should correctly switch the process back
to its original, correct cluster file, allowing the cluster to fully
recover all clusters.
Note that the above issue should only affect simulation, due to how the
simulator tracks processes and handles kill signals.
This commit also adds a field to each process struct to determine
whether the process is being run in a DR cluster in the simulation run.
This is needed because simulation does not differentiate between
processes in different clusters (other than by the IP), and some
processes needed to switch clusters and some simply needed to be
rebooted.
The simulator tracks only active processes. Rebooted or killed processes
are removed from the list of processes, and only get added back when the
process is rebooted and starts up again. This causes a problem for the
`RebootProcessAndSwitch` kill type, which wants to simultaneously reboot
all machines in a cluster and change their cluster file. If a machine is
currently being rebooted, it will miss the reboot process and switch
command.
The fix is to add a check when a process is being started in simulation.
If the process has had its cluster file changed and the cluster is in a
state where all processes should have had their cluster files reverted
to the original value, the simulator will now send a
`RebootProcessAndSwitch` signal right when the process is started. This
will cause an extra reboot, but should correctly switch the process back
to its original, correct cluster file, allowing the cluster to fully
recover all clusters.
Note that the above issue should only affect simulation, due to how the
simulator tracks processes and handles kill signals.
This commit also adds a field to each process struct to determine
whether the process is being run in a DR cluster in the simulation run.
This is needed because simulation does not differentiate between
processes in different clusters (other than by the IP), and some
processes needed to switch clusters and some simply needed to be
rebooted.
Specifying the `--no-config-db` option when changing coordinators
through fdbcli will prevent the command from hanging when the
configuration database is not active. Failing to specify this option
when the configuration database is not active will not affect the
correctness of the command, but it will hang instead of returning.
Configuration database data lives on the coordinators. When a change
coordinators command is issued, the data must be sent to the new
coordinators to keep the database consistent.
* Encryption data at-rest db-config
Description
diff-1: Handle 'force' updates to encryption_at_rest db-config
Major changes proposed:
1. Introduce 'encryption_data_at_rest_mode" 'configure new'
option to enable Encryption data at-rest. The feature is disabled
by default.
2. The configuration is meant to be set at the time of database
creation, addition checks will be done to avoid updating the config
in subsequent PR.
3. DatabaseConfiguration validity check to account for "tenant_mode"
set to `required` if Encryption data at-rest is selected given
EncryptionDomain matches Tenant boundaries.
Testing
devCorrectness - 100K
* Enable configuring the next future protocol version as the current protocol version in FDB client, fdbserver, and fdbcli
* Auto format python files used in upgrade tests
* Add a test for upgrading to a future FDB version
* Emphasize that the options for using future protocol version are intended for test purposes only
* Make the global variable for current protocol version visible only locally
* Refactirng to avoid using currentProtocolVersion() in static intialization
* Update go bindings
There was a rare but possible issue where a change coordinators request
could be in flight, but reading `\xff/coordinators` would return the old
set of coordinators, even though a previous attempt to write it returned
`commit_unknown_result`. This happened if there was an unrelated
recovery between setting `\xff/coordinators` and the updated
coordinators reaching each machine. The `commit_unknown_result` caused
by this recovery meant the change coordinators retry loop would read
`\xff/coordinators`, but since the request was ongoing it would read the
old set of coordinators. The fix is to have the cluster controller
ignore any change coordinators request from an old generation, meaning
when the retry loop reads the old coordiantors from `\xff/coordinators`,
it is guaranteed that the in progress change coordinators message will
be rejected when arriving at the cluster controller.
* proof of concept
* use code-probe instead of test
* code probe working on gcc
* code probe implemented
* renamed TestProbe to CodeProbe
* fixed refactoring typo
* support filtered output
* print probes at end of simulation
* fix missed probes print
* fix deduplication
* Fix refactoring issues
* revert bad refactor
* make sure file paths are relative
* fix more wrong refactor changes
This change adds:
* ability to store the mapping from tenants to quota in the system keyspace,
* a setter and getter function
* a new workload to test this functionality
FDBCORE-2437
* Fix comments
* Add simulation value for SERVER_KNOBS->SNAP_CREATE_MAX_TIMEOUT
* A work version with correctness clean
* Remove unnecessay comments; debugging symbols
* Only check secondary address for coordinators, same as before
* Change the trace to SevError and remove the ASSERT(false)
* Remove TLogSnapRequest handling on TlogServer, which is changed to use WorkerSnapRequest
* Add retry for network failures
* Add retry limit for network failures; still allow duplicate snapshots on processes are both tlog and storage to avoid race
* Add retry limit as a knob and make backoff exponentail
* Add getDatabaseConfiguration(Transaction* tr)
* revert back to send request for each role once
* update some comments
Zhe Wang