Currently, Twister Statuses are only useful for
the initiated, save for the very basics.
This is in opposition to the fact
that they are the main thing end users take into
account when checking their Twister run reports.
In order to make Statuses more useful for the end user,
a new documentation page has been created,
elucidating the full meaning of all Statuses.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in various files within the `doc` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
There is no way to know for sure the size of an image built for a test,
given that zephyr can build for so many different architectures,
platforms, software supports, etc. So it should be clear that the filter
for min_ram and min_flash on the twister testcases is an estimate, and
not a strictly well known value.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
To use Xtensa toolchain, various environment variables must be
set so the executables can find necessary files and what core
to compile for. This becomes an annoyance when you have to
test multiple boards with different cores. You have to use
one set of environment variables per core. Twister cannot test
them all in one setting, and it is especially annoying doing
west builds. So enhance the environment variables handling so
that TOOLCHAIN_VER and XTENSA_CORE can be replaced by
TOOLCHAIN_VAR_<board> and XTENSA_CORE_<board> where <board>
is the normalized board target (think <board>.yaml). CMake
will then figure out the core ID for the toolchain to use.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The initial note about the install guide for different distributions
can be easily overlooked. Add a second note to make it more prominent
in the first step.
Signed-off-by: Timon Skerutsch <zephyr@diodes-delight.com>
Added a note that udev rules must be configured in Linux environments.
Reformatted text accordingly.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
SDK installation has been simplified by introducing the `west sdk`
command. I updated the documentation to use this.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
This updates the documentation of all the Qemu boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Atmel boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the NXP boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Adafruit boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixes commit 1df078158f ("doc: build: Add signing page") that removed
the `imgtool` section from the `sign.rst` page.
rimage configuration was designed in a very different way from imgtool
configuration. The rimage doc section was following the imgtool doc
section and constrating the two approaches. Now that the previous
imgtool doc section has just been removed, some words like "different"
and "instead" don't make sense anymore. Drop them.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Add `west bindesc get_offset` command to print the offset of
the descriptors inside the given image.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Adds a signing page under build, which contains information on
how to sign images from the build system, this removes the old
details for using west sign with imgtool from the west sign page
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Document the recommended practice regarding having default definitions for
module-specific Kconfig symbols.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Adds missing code-sample directive to the Hello World sample in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
As there is no check (yet!) in the directive, many
.. zephyr-app-commands:: in the documentation are pointing to
non-existing sample applications, which is problematic for users who
typically expect to just copy-paste the commands and have them work.
This commit fixes all offending references to point to existing samples,
or converts them to simple ":app:" instead of ":zephyr-app:" when the
intent wasn't to refer to in-tree samples.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The zephyr-app-commands directive can output a helpful hint to the user
when they are trying to build a sample that is in the Zephyr tree,
telling them to ensure they are in the root folder of the Zephyr repo.
Update all doc pages that were using :app: instead of :zephyr-app: so
that the hint is displayed.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Updates references to the net-tools project to refer to the correct
placement of net-tools under tools.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Add information about main(int, argc **) in places where the documentation
stated that only parameterless main could be used
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Added links pointing to the Dedicated image build targets
from Optimization tools page for ram_report, rom_report, footprint,
puncover, and pahole.
Reported by @markaj-nordic.
Signed-off-by: Grzegorz Ferenc <Grzegorz.Ferenc@nordicsemi.no>
Expanding the ZTEST shell to include a command that
accepts additional parameters, such as ztest run_testcase
<suite:test> -p any_value.
Adding the new ZTEST_P macro, to create the
parameterized test.
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
A common question is how twister decides on which platform to run
a given test. Added section is meant to explain those rules.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Extend pytest-args from configuration yaml file with args
from command line instead of overwriting.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Added python-tk to the brew install statement.
In order to use the zephyr gui tools python must also have the
"tkinter" (python tk interface) tools available.
tkinter is NOT part of 'python3' through homebrew on macOS.
fixes#76811
Signed-off-by: Eric Southam <eric.southam@lvt.com>
1.16 was not meant to be a release, and 1.14 was long ago.
Let's use as example something much more recent.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
When deprecating APIs,
let's tell users to add to one GitHub issue tracking all
deprecated APIs meant to be removed,
so the process is simpler and hopefully developers do it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a new fixture, `unlaunched_dut`, which is basically the `dut`
one, but without launching the device - thus also not building the
application. It is useful for tests who need a finer control of
the building of the application, before the dut can be launched
to run it.
It will be used on a future patch, which will use it to enable LLEXT EDK
tests.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
As it was already outlined, installing Python dependencies at a system
level or user level can be dangerous. For this reason, the default setup
instructions already pointed users to use Python virtual environments. On
newer Ubuntu installations (23.04 onwards) system-level pip installs are
not allowed. Let's make Zephyr _Python-safe_ as well by removing dangerous
instructions.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
probe-rs is a new programming and debugging tool written in Rust, supports
many probes and targets.
This commit introduces initial support for probe-rs to Zephyr.
Signed-off-by: Chen Xingyu <hi@xingrz.me>
Breathe is not very strict about the types used to reference C domain
objects (ex. referencing a struct using `:c:type:` would work, and vice
versa) but other tooling might be. This commit fixes some of such
incorrectly documented elements.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This reverts commit a156b619d4.
Now that Sphinx 7.4 is out, it is possible to use webp images
in the PDF documentation (they're converted to png).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Pieter De Gendt