Hook up all attributes that don't have a MSVC specific version at the
moment.
See f637046d31 for details.
These don't seem to be critical for building with clang in MSVC mode
though, and thus haven't been hooked up until now.
These seem to build fine with as old clang as 3.3 at least.
(clang 3.3 disguises itself as gcc 4.2 normally, so all of these
have been used for clang before, except for av_cold.)
The clang version numbers themselves are useless for detecting what
attributes are available, since Apple's clang builds use a completely
different versioning (presenting itself as e.g. clang 8.0 instead
of 3.8).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'e87a501e7d03ac68b58520108fe24ad9d0b36765':
swscale: Update bitdepth range check
This commit is a noop.
Up to 14 bits is supported since fa36f33422. This commits pushes the
limit to 15 bits but we don't seem to have pixel formats that enters in
that category.
12:03 <ubitux> so what's your opinion? should we move to 15 even if unused currently to make it consistent with libav and the function names, or keep our 14 suggesting there might be an issue with 15?
12:05 <ubitux> (functions are called hScale8To15_c, hScale16To15_c, ff_hscale8to15, ...)
12:06 <michaelni> I prefer to keep 14 until theres a case that allows us to test this and i suspect it will not work with 15 at least not all the code
Merged-by: Clément Bœsch <u@pkh.me>
This patch deprecates anything that has to do with merging/splitting
side data. Automatic side data merging (and splitting), as well as all
API symbols involved in it, are removed completely.
Two FF_API_ defines are dedicated to deprecating API symbols related to
this: FF_API_MERGE_SD_API removes av_packet_split/merge_side_data in
libavcodec, and FF_API_LAVF_KEEPSIDE_FLAG deprecates
AVFMT_FLAG_KEEP_SIDE_DATA in libavformat.
Since it was claimed that changing the default from merging side data to
not doing it is an ABI change, there are two additional FF_API_ defines,
which stop using the side data merging/splitting by default (and remove
any code in avformat/avcodec doing this): FF_API_MERGE_SD in libavcodec,
and FF_API_LAVF_MERGE_SD in libavformat.
It is very much intended that FF_API_MERGE_SD and FF_API_LAVF_MERGE_SD
are quickly defined to 0 in the next ABI bump, while the API symbols are
retained for a longer time for the sake of compatibility.
AVFMT_FLAG_KEEP_SIDE_DATA will (very much intentionally) do nothing for
most of the time it will still be defined. Keep in mind that no code
exists that actually tries to unset this flag for any reason, nor does
such code need to exist. Code setting this flag explicitly will work as
before. Thus it's ok for AVFMT_FLAG_KEEP_SIDE_DATA to do nothing once
side data merging has been removed from libavformat.
In order to avoid that anyone in the future does this incorrectly, here
is a small guide how to update the internal code on bumps:
- next ABI bump (probably soon):
- define FF_API_LAVF_MERGE_SD to 0, and remove all code covered by it
- define FF_API_MERGE_SD to 0, and remove all code covered by it
- next API bump (typically two years in the future or so):
- define FF_API_LAVF_KEEPSIDE_FLAG to 0, and remove all code covered
by it
- define FF_API_MERGE_SD_API to 0, and remove all code covered by it
This forces anyone who actually wants packet side data to temporarily
use deprecated API to get it all. If you ask me, this is batshit fucked
up crazy, but it's how we roll. Making AVFMT_FLAG_KEEP_SIDE_DATA to be
set by default was rejected as an ABI change, so I'm going all the way
to get rid of this once and for all.
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '5ebef79abecc3ffcc4ab0d46e203d13b068107c9':
Fix instances of broken indentation found by gcc 6
Noop, see 21d3f0c02, 6089c44a2
Merged-by: Clément Bœsch <u@pkh.me>
* commit 'ae90119c6701fa09ff747cca35238e36b2d2ab2f':
configure: Simplify license incompatibility check
An extra GPLV3 list is added for libsmbclient as having it in both GPL
and VERSION3 lists would cause a duplicate in the final config list.
Also, for consistency, libnpp is treated the same as the other nonfree
component (libfdk_aac and openssl).
Merged-by: Clément Bœsch <u@pkh.me>
so tsf option in aresample will have effect
previously tsf/internal_sample_format had no effect
fate is updated
s32p previously used fltp internally
dblp previously used fltp/dblp internally
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Muhammad Faiz <mfcc64@gmail.com>
The code does some nontrivial jumping around in the buffer, so it is
safer to use a checked API rather than do everything manually.
Fixes a bug in nalff parsing, where the length field is currently not
counted in the buffer size check, resulting in possible overreads with
invalid files.
CC: libav-stable@libav.org
Bug-Id: 1002
Found-By: Kamil Frankowicz
Decodes YUV 4:2:2 10-bit and RGB 12-bit files.
Older files with more subbands, skips, Bayer, alpha not supported.
Further fixes and refactorings by Anton Khirnov <anton@khirnov.net>,
Diego Biurrun <diego@biurrun.de>, Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Make it clear that there is no timing-dependent behavior. In particular,
there is no state in which both input and output are denied, and where
you have to wait for a while yourself to make progress (apparently some
hardware decoders like to do this).
Avoid wording that makes references to time. It shouldn't be mistaken
for some kind of asynchronous API (like POSIX read() can return EAGAIN
if there is no new input yet). It's a state machine, so try to use
appropriate terms.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Merges Libav commit 8a60bba0ae.
The way videotoolbox hooks in as a hwaccel is pretty hacky. The VT decode
API is not invoked until end_frame(), so alloc_frame() returns a dummy
frame with a 1-byte buffer. When end_frame() is eventually called, the
dummy buffer is replaced with the actual decoded data from
VTDecompressionSessionDecodeFrame().
When the VT decoder fails, the frame returned to the h264 decoder from
alloc_frame() remains invalid and should not be used. Before
9747219958, it was accidentally being
returned all the way up to the API user. After that commit, the dummy
frame was unref'd so the user received an error.
However, since that commit, VT hwaccel failures started causing random
segfaults in the h264 decoder. This happened more often on iOS where the
VT implementation is more likely to throw errors on bitstream anomolies.
A recent report of this issue can be see in
http://ffmpeg.org/pipermail/libav-user/2016-November/009831.html
The issue here is that the dummy frame is still referenced internally by the
h264 decoder, as part of the reflist and cur_pic_ptr. Deallocating the
frame causes assertions like this one to trip later on during decoding:
Assertion h->cur_pic_ptr->f->buf[0] failed at src/libavcodec/h264_slice.c:1340
With this commit, we leave the dummy 1-byte frame intact, but avoid returning it
to the user.
This reverts commit 9747219958.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
The constants used in the decoder used floating point precision,
and this caused different values to be generated on different
architectures. Additionally on big endian machines, the fate test
would output bytes in native order, which is different from the one
hardcoded in the test.
So, eradicate floating point numbers and use fixed point (32.32)
arithmetics everywhere, replacing constants with precomputed integer
values, and force the pixel format output to be the same in the fate
test.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
qmin and qmax are not necessary for nvenc vbr.
Also fix for using 2 pass vbr mode for slow preset through ctx->flag NVENC_TWO_PASSES.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The map is a sparse array and does not need a empty element to terminate
it.
The empty element is stored after the last one inserted in the list,
overwriting whichever element was next with zeros.
Bug-Id: 1029
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This should fix the fate failure due to a truncated last frame.
Alternatively the frame could be dropped.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
According to the spec[1], a value of 0 means the footer is present and a value
of 1 means it's absent, the exact opposite of header presence flag where 1
means present and 0 absent.
The reason for this is compatibility with APEv1 tags, where there's no header,
footer presence was mandatory for all files, and the flags field was a zeroed
reserved field.
[1] http://wiki.hydrogenaud.io/index.php?title=Ape_Tags_Flags
Signed-off-by: James Almer <jamrial@gmail.com>
CC: libav-stable@libav.org
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The idct32x32 function actually pushed q4-q7 onto the stack even
though it didn't clobber them; there are plenty of registers that
can be used to allow keeping all the idct coefficients in registers
without having to reload different subsets of them at different
stages in the transform.
Since the idct16 core transform avoids clobbering q4-q7 (but clobbers
q2-q3 instead, to avoid needing to back up and restore q4-q7 at all
in the idct16 function), and the lanewise vmul needs a register in
the q0-q3 range, we move the stored coefficients from q2-q3 into q4-q5
while doing idct16.
While keeping these coefficients in registers, we still can skip pushing
q7.
Before: Cortex A7 A8 A9 A53
vp9_inv_dct_dct_32x32_sub32_add_neon: 18553.8 17182.7 14303.3 12089.7
After:
vp9_inv_dct_dct_32x32_sub32_add_neon: 18470.3 16717.7 14173.6 11860.8
Signed-off-by: Martin Storsjö <martin@martin.st>
ts_offset was added to cluster timecode, but then effectively subtracted
back off the block timecode
When setting initial_padding for an audio stream, the timestamps are
written incorrectly to the mkv file. cluster timecode gets written
as pts0 + ts_offset which is correct, but then block timecode gets
written as pts - cluster timecode which expanded is
pts - (pts0 + ts_offset). Adding cluster and block tc back together:
cluster + block = (pts0 + ts_offset) + (pts - (pts0 + ts_offset)) = pts
But the result should be pts + ts_offset since demux will subtract the
CodecDelay element from pts and set initial_padding to CodecDelay.
This patch gives the correct result.
The Intel proprietary VAAPI driver enforces the restriction that a
buffer must be created inside an existing context, so just ensure
this is always true.
When slice_h is rounded up due to chroma subsampling, there's
a risk that jobnr * slice_h exceeds frame->height.
Prior to a638e9184d, this wasn't an issue for the last slice
of a frame, since slice_end was set to frame->height for the last
slice.
a638e9184d tried to fix the case where other slices than the
last one would exceed frame->height (which can happen where the
number of slices/threads is very large compared to the frame
height).
However, the fix in a638e9184d instead broke other cases,
where slice_h * nb_threads < frame->height. Therefore, make
sure the last slice always ends at frame->height.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
If the stream timebase is coarser than the muxing timebase then the
monotonisation process may fail because adding one to the timestamp
need not actually produce a different timestamp after the rescale.
The early check for inconsistent in-source vs out-of-source build
cannot generate a config.log otherwise.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
According to the spec[1], a value of 0 means the footer is present and a value
of 1 means it's absent, the exact opposite of header presence flag where 1
means present and 0 absent.
The reason for this is compatibility with APEv1 tags, where there's no header,
footer presence was mandatory for all files, and the flags field was a zeroed
reserved field.
[1] http://wiki.hydrogenaud.io/index.php?title=Ape_Tags_Flags
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Core of patch is from paul@paulmehta.com
Reference https://crbug.com/643952 (udta_string portion)
Signed-off-by: Matt Wolenetz <wolenetz@chromium.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If this is wanted iam not against it but it must be designed to work with all cases
like slice threads, and a single growing buffer does not work very well with slices.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes all sorts of configuration problems introducec by dad7a9c7c0
on non-Linux or non-vanilla configs. Also removes a line made redundant
in that commit.
This swaps which field is set when the Window Acknowledgement Size
and Set Peer BW packets are received, renames the fields in
order to clarify their role further and adds verbose comments
explaining their respective roles and how well the code currently
does what it is supposed to.
The Set Peer BW packet tells the receiver of the packet (which
can be either client or server) that it should not send more data
if it already has sent more data than the specified number of bytes,
without receiving acknowledgement for them. Actually checking this
limit is currently not implemented.
In order to be able to check that properly, one can send the
Window Acknowledgement Size packet, which tells the receiver of the
packet that it needs to send Acknowledgement packets
(RTMP_PT_BYTES_READ) at least after receiving a given number of bytes
since the last Acknowledgement.
Therefore, when we receive a Window Acknowledgement Size packet,
this sets the maximum number of bytes we can receive without sending
an Acknowledgement; therefore when handling this packet we should set
the receive_report_size field (previously client_report_size).
Signed-off-by: Martin Storsjö <martin@martin.st>
Implements support for height/width expressions in vf_scale_vaapi,
by refactoring common code into a new libavfilter/scale.c
Signed-off-by: Mark Thompson <sw@jkqxz.net>
* commit 'd639dcdae022130078c9c84b7b691c5e9694786c':
ratecontrol: Move Xvid-related functions to the place they are actually used
Merged-by: Clément Bœsch <u@pkh.me>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Also makes sure all streams are assigned to exactly one AdaptationSet.
This patch is originally based partially on code by Vignesh Venkatasubramanian.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
If set, adds a UTCTiming tag in the manifest.
This is part of the recommendations listed in the "Guidelines for
Implementations: DASH-IF Interoperability Points" [1][2]
Section 4.7 describes means for the Availability Time Synchronization.
A usable default is "https://time.akamai.com/?iso"
[1] http://dashif.org/guidelines/
[2] http://dashif.org/wp-content/uploads/2016/12/DASH-IF-IOP-v4.0-clean.pdf
(current version as of writing)
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Instead of just updating statistics and leaving the work to the
call site, have it actually do the work.
Also: skip the samples by updating the frame data pointers
instead of moving the samples. More efficient and avoid writing
into shared frames.
Found-By: Muhammad Faiz <mfcc64@gmail.com>
Servers seem to be happy to receive the wrapped-around value as long
as they receive a report, otherwise they timeout.
Initially reported and analyzed by Thomas Bernhard.
This allows testing EC and non EC. Avoids spending most time in EC on
high res samples and reduces the likelyhood of hitting timeouts
Fixes: Timeout in 467/fuzz-2-ffmpeg_VIDEO_AV_CODEC_ID_H263_fuzzer
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'f450cc7bc595155bacdb9f5d2414a076ccf81b4a':
h264: eliminate decode_postinit()
Also includes fixes from 1f7b4f9abc and e344e65109.
Original patch replace H264Context.next_output_pic (H264Picture *) by
H264Context.output_frame (AVFrame *). This change is discarded as it
is incompatible with the frame reconstruction and motion vectors
display code which needs the extra information from the H264Picture.
Merged-by: Clément Bœsch <u@pkh.me>
Merged-by: Matthieu Bouron <matthieu.bouron@gmail.com>
Seemingly ff_clear_block_sse assumed that the block array is aligned,
so make sure it is.
Fixes ticket #6079
Signed-off-by: James Almer <jamrial@gmail.com>
No need to loop through the known surfaces, we'll use the requested surface
anyway.
The loop is only done for DXVA2.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
start_number option starts the playlist sequence number
(#EXT-X-MEDIA-SEQUENCE) from the specified number. Unless hls_flags
single_file is set, it also specifies starting sequence numbers of
segment and subtitle filenames. Sometimes it is usefull to have unique
starting numbers at each run, but currently it is only achiveable by
setting this parameter manually.
This patch enables to specify start_number source parameter by
introducing hls_start_number_source with 3 possible values:
generic/epoch/datetime. This ensures to set start sequence number
automatically for practically unique numbers. Generic option is the
default and this is the curent behaviour: start_number option value
specifies the start sequence number. (start_number default value is 0)
If hls_start_number_source is set to epoch, then the start number will
be the seconds since epoch (1970-01-01 00:00:00). If set to datetime,
then the start sequence number will be based on the current date/time
value as YYYYmmddHHMMSS. e.g. 20161231235659.
Hls speficication allows 64 bit integers as sequence numbers. This patch
also changes some code where only 32 bit integer values were handled
correctly.
Reviewed-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
When allocating stack space with an alignment requirement that is larger
than the current stack alignment we need to store a copy of the original
stack pointer in order to be able to restore it later.
If we chose to use another register for this purpose we should not pick
eax/rax since it can be overwritten as a return value.
fix CID: 1398364 Resource leak
refine the code of the new options
Reviewed-by: Bodecs Bela <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
If a read fails, the current code will free the data but leave the size
non-zero. Make sure the size is zeroed in such a case.
CC: libav-stable@libav.org
Bug-Id: 1001
Found-By: Kamil Frankowicz
Signed-off-by: Sean McGovern <gseanmcg@gmail.com>
A wrong, unitialized variable is used for testing. This patch fixes this
typo.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Fixes assertion failure due to unsupported case
Fixes: 356/fuzz-1-ffmpeg_VIDEO_AV_CODEC_ID_MJPEG_fuzzer
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In ff_index_search_timestamp(), if b == num_entries,
m == num_entries - 1, and entries[m].flags & AVINDEX_DISCARD_FRAME is
true, then the search for the next non-discarded packet could access
entries[nb_entries], exceeding its bounds. This change adds a protection
against that scenario. Reference: https://crbug.com/666770
Reviewed-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Otherwise the .rep file would still contain a signal instead of a
zero, even if the process returned success.
Signed-off-by: Martin Storsjö <martin@martin.st>
This moves work from the configure to the Make stage where it can
be parallelized and ensures that shared libraries are built with
the right version number in the filename.
When receiving fragmented packets, the first packet declares the size,
and the later ones normally are small follow-on packets that don't repeat
the size and the other header fields. But technically, the later fragments
also can have a full header, declaring a different size than the previous
packet.
If the follow-on packet declares a larger size than the initial one, we
could end up writing outside of the allocation.
This fixes out of bounds writes.
Found-by: Paul Cher <paulcher@icloud.com>
Reviewed-by: Paul Cher <paulcher@icloud.com>
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
It is useful for testing/debugging and will also be used as the default
filter in the following commit adding pre-decode filtering to avoid
having a separate non-filtered codepath.
Fixes undefined operation
Fixes part of 668007-media
Found-by: Matt Wolenetz <wolenetz@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Examples use the native FFmpeg AAC encoder but it is no longer
considered experimental and therefore not required.
Signed-off-by: Lou Logan <lou@lrcd.com>
While no decoder currently exports spherical information, this type
represents a frame property that has to be passed through from container
to frames.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This matrix needs to be applied after all others have (currently only
display matrix from trak), but cannot be handled in movie box, since
streams are not allocated yet. So store it in main context, and apply
it when appropriate, that is after parsing the tkhd one.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The delta escape (2) is supposed to work the same in 4-bit RLE as in
8-bit RLE. This is documented in the MSDN Bitmap Compression page:
https://msdn.microsoft.com/en-us/library/windows/desktop/dd183383(v=vs.85).aspx
The unchecked modification of line is safe, since the loop condition
(line >= 0) will check it before any pixel data is written.
Fixes ticket #5153 (output now matches ImageMagick for the provided sample).
Signed-off-by: Daniel Verkamp <daniel@drv.nu>
give very bad quality for soxr resampler.
linear_interp is intended for using linear interpolation
between filter bank so quality will be better.
i guess this is misunderstood as 'do not use filter bank,
but directly interpolate linearly between samples'.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Muhammad Faiz <mfcc64@gmail.com>
This dubious behaviour in nvenc was finally removed by nvidia, and
as we refuse to run on anything older than 7.0, we don't need to
keep it around for old versions.
Move global thread variables to better place.
Use correct variable for simple and complex filtergraphs.
This makes number of threads set per filter work again.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Expands the parser to also accept the separator '-' in addition to
'+', and take the negative sign into consideration.
The optional sign for the first factor in the expression is already
covered by parsing for an integer.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This reverts commit 81d7f0bbca.
Instead of just benchmarking dc separately, test all relevant subparts
(in the next commit).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '8d07e941b04d63fc4443dd986e3dc7b69cdcca43':
FATE: add a test of H.264 SEI recovery in an intra refresh stream
Our H264 decoder drops 3 frames from the beginning of the stream, but
all frames after those match, hence the difference in the fate test.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This matches the other branch
Fixes out of array read
Fixes: 4d142ca76d39fe685effcf5017098723/asan_heap-oob_31ae824_8611_348fdb64f9009b63c8a8eae9a0e497c5.mkv
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Stream timebase should be set using avpriv_set_pts_info, otherwise
avctx->pkt_timebase is not correct, leading to A/V desync.
Signed-off-by: Marton Balint <cus@passwd.hu>
Reviewed-by: Stephen Hutchinson <qyot27@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This fixes NULL pointer dereferencing for formats, where frame->data[1]
is not allocated.
The problem was introduced in commit
257fbc3af4.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This prevented the code from correctly exporting the rotation matrix
which caused a few samples to be displayed wrong.
Introduced in ecd2ec69ce.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Fixes building with --disable-everything --enable-shared --enable-dxva2
The hwcontext DXVA2 implementation in avutil needs this library now, instead
of just the ffmpeg program.
libavfilter/af_asyncts.c:212:9: warning: absolute value function 'labs' given an argument of type 'int64_t' (aka 'long long') but has parameter of type 'long' which may cause truncation of value [-Wabsolute-value]
This is similar to commit 9ac61e73d0.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This was correct for H.26[45], because libmfx uses the same values
derived from profile_idc and the constraint_set flags, but it is
wrong for other codecs.
Also avoid passing FF_LEVEL_UNKNOWN (-99) as the level, as this is
certainly invalid.
* commit '7c55fac7dfa8bad9644dea5d03309da30be69563':
fate: Add test for webp
Noop, we already have a variety of webp tests, including a fate-webp target,
which would collide with this test.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This prevents a division by zero in read_packet.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Set up the encoder with a hardware context which will match the one
the decoder will use when it starts later.
Includes 02c2761973, with additional
hackery to get around a3a0230a98 being
skipped.
openvela-robot