Fixes assertion failure due to unsupported case
Fixes: 356/fuzz-1-ffmpeg_VIDEO_AV_CODEC_ID_MJPEG_fuzzer
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In ff_index_search_timestamp(), if b == num_entries,
m == num_entries - 1, and entries[m].flags & AVINDEX_DISCARD_FRAME is
true, then the search for the next non-discarded packet could access
entries[nb_entries], exceeding its bounds. This change adds a protection
against that scenario. Reference: https://crbug.com/666770
Reviewed-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Otherwise the .rep file would still contain a signal instead of a
zero, even if the process returned success.
Signed-off-by: Martin Storsjö <martin@martin.st>
This moves work from the configure to the Make stage where it can
be parallelized and ensures that shared libraries are built with
the right version number in the filename.
When receiving fragmented packets, the first packet declares the size,
and the later ones normally are small follow-on packets that don't repeat
the size and the other header fields. But technically, the later fragments
also can have a full header, declaring a different size than the previous
packet.
If the follow-on packet declares a larger size than the initial one, we
could end up writing outside of the allocation.
This fixes out of bounds writes.
Found-by: Paul Cher <paulcher@icloud.com>
Reviewed-by: Paul Cher <paulcher@icloud.com>
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
It is useful for testing/debugging and will also be used as the default
filter in the following commit adding pre-decode filtering to avoid
having a separate non-filtered codepath.
Fixes undefined operation
Fixes part of 668007-media
Found-by: Matt Wolenetz <wolenetz@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Examples use the native FFmpeg AAC encoder but it is no longer
considered experimental and therefore not required.
Signed-off-by: Lou Logan <lou@lrcd.com>
While no decoder currently exports spherical information, this type
represents a frame property that has to be passed through from container
to frames.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
While no decoder currently exports spherical information, this type
represents a frame property that has to be passed through from container
to frames.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This matrix needs to be applied after all others have (currently only
display matrix from trak), but cannot be handled in movie box, since
streams are not allocated yet. So store it in main context, and apply
it when appropriate, that is after parsing the tkhd one.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The delta escape (2) is supposed to work the same in 4-bit RLE as in
8-bit RLE. This is documented in the MSDN Bitmap Compression page:
https://msdn.microsoft.com/en-us/library/windows/desktop/dd183383(v=vs.85).aspx
The unchecked modification of line is safe, since the loop condition
(line >= 0) will check it before any pixel data is written.
Fixes ticket #5153 (output now matches ImageMagick for the provided sample).
Signed-off-by: Daniel Verkamp <daniel@drv.nu>
give very bad quality for soxr resampler.
linear_interp is intended for using linear interpolation
between filter bank so quality will be better.
i guess this is misunderstood as 'do not use filter bank,
but directly interpolate linearly between samples'.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Muhammad Faiz <mfcc64@gmail.com>
This dubious behaviour in nvenc was finally removed by nvidia, and
as we refuse to run on anything older than 7.0, we don't need to
keep it around for old versions.
Move global thread variables to better place.
Use correct variable for simple and complex filtergraphs.
This makes number of threads set per filter work again.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Expands the parser to also accept the separator '-' in addition to
'+', and take the negative sign into consideration.
The optional sign for the first factor in the expression is already
covered by parsing for an integer.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This reverts commit 81d7f0bbca.
Instead of just benchmarking dc separately, test all relevant subparts
(in the next commit).
Signed-off-by: Martin Storsjö <martin@martin.st>
Functionally similar to av_packet_add_side_data(). Allows the use of an
already allocated buffer as stream side data.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Functionally similar to av_packet_add_side_data(). Allows the use of an
already allocated buffer as stream side data.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit '8d07e941b04d63fc4443dd986e3dc7b69cdcca43':
FATE: add a test of H.264 SEI recovery in an intra refresh stream
Our H264 decoder drops 3 frames from the beginning of the stream, but
all frames after those match, hence the difference in the fate test.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This matches the other branch
Fixes out of array read
Fixes: 4d142ca76d39fe685effcf5017098723/asan_heap-oob_31ae824_8611_348fdb64f9009b63c8a8eae9a0e497c5.mkv
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Stream timebase should be set using avpriv_set_pts_info, otherwise
avctx->pkt_timebase is not correct, leading to A/V desync.
Signed-off-by: Marton Balint <cus@passwd.hu>
Reviewed-by: Stephen Hutchinson <qyot27@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This fixes NULL pointer dereferencing for formats, where frame->data[1]
is not allocated.
The problem was introduced in commit
257fbc3af4.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This prevented the code from correctly exporting the rotation matrix
which caused a few samples to be displayed wrong.
Introduced in ecd2ec69ce.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Fixes building with --disable-everything --enable-shared --enable-dxva2
The hwcontext DXVA2 implementation in avutil needs this library now, instead
of just the ffmpeg program.
libavfilter/af_asyncts.c:212:9: warning: absolute value function 'labs' given an argument of type 'int64_t' (aka 'long long') but has parameter of type 'long' which may cause truncation of value [-Wabsolute-value]
This is similar to commit 9ac61e73d0.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This was correct for H.26[45], because libmfx uses the same values
derived from profile_idc and the constraint_set flags, but it is
wrong for other codecs.
Also avoid passing FF_LEVEL_UNKNOWN (-99) as the level, as this is
certainly invalid.
* commit '7c55fac7dfa8bad9644dea5d03309da30be69563':
fate: Add test for webp
Noop, we already have a variety of webp tests, including a fate-webp target,
which would collide with this test.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
The Intel binary iHD driver does not support the
VASurfaceAttribMemoryType, so surface allocation will fail when using
it.
(cherry picked from commit 2124711b95)
The driver being used is detected inside av_hwdevice_ctx_init() and
the quirks field then set from a table of known device. If this
behaviour is unwanted, the user can also set the quirks field
manually.
Also adds the Intel i965 driver quirk (it does not destroy parameter
buffers used in a call to vaRenderPicture()) and detects that driver
to set it.
(cherry picked from commit 4926fa9a4a)
This prevents a division by zero in read_packet.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Set up the encoder with a hardware context which will match the one
the decoder will use when it starts later.
Includes 02c2761973, with additional
hackery to get around a3a0230a98 being
skipped.
libavcodec/ratecontrol.c:120:9: warning: ISO C forbids initialization between function pointer and ‘void *’ [-Wpedantic]
libavcodec/ratecontrol.c:121:9: warning: ISO C forbids initialization between function pointer and ‘void *’ [-Wpedantic]
Also contains the following changes to the library:
- add ff_ prefix to functions
- remove cplusplus defines.
- add FF_ prefix to contants and some structs
- remove true peak calculation feature, since it uses its own resampler, and
af_loudnorm does not need it.
- remove version info and some fprintf(stderr) functions
- convert to use av_malloc
- always use histogram mode for LRA calculation, otherwise LRA data is slowly
consuming memory making af_loudnorm unfit for 24/7 operation. It also uses a
BSD style linked list implementation which is probably not available on all
platforms. So let's just remove the classic mode which not uses histogram.
- add ff_thread_once for calculating static histogram tables
- convert some functions to void which cannot fail
- remove intrinsics and some unused headers
- add support for planar audio
- remove channel / sample rate changer function, in ffmpeg usually we simply
alloc a new context
- convert some static variables to defines
- declare static histogram variables as aligned
- convert some initalizations to mallocz
- add window size parameter to init function and remove window size setter
function
- convert return codes to AVERROR
- fix indentation
Signed-off-by: Marton Balint <cus@passwd.hu>
It can read less than the requested amount, in which case buf contains
uninitialized data, causing problems like segmentation faults later on.
Also make sure that image->size is positive, so that it can't match a
negative error code.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
When decoding with threads enabled, the get_format callback will be
called with one of the per-thread codec contexts rather than with the
outer context. If a hwaccel is in use too, this will add a reference
to the hardware frames context on that codec context, which will then
propagate to all of the other per-thread contexts for decoding. Once
the decoder finishes, however, the per-thread contexts are not freed
normally, so these references leak.
The secondary compression in Hap is optional, this change exposes that option to
the user as some use-cases favour higher bitrate files to reduce workload
decoding.
Adds "none" or "snappy" as options for "compressor". Selecting "none" disregards
"chunks" option: chunking is only of benefit decompressing Snappy.
Reviewed-by: Martin Vignali <martin.vignali@gmail.com>
Signed-off-by: Tom Butterworth <bangnoise@gmail.com>
aac_adtstoasc makes the aac extradata available only after the first packet
is filtered, and as packet side data.
Assume extradata will be available as part of the first packet if
avpriv_mpeg4audio_get_config() fails the first time due to missing extradata
and reserve space for the OutputSampleRate element in the Tracks master.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The code assumes that s->streams[0] is valid.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
If the value is negative then it means padding at the start of the packet
instead of at the end.
Based on a patch by Hendrik Leppkes.
Reviewed-by: James Zern <jzern-at-google.com@ffmpeg.org>
Signed-off-by: James Almer <jamrial@gmail.com>
The libopus encoder does the same thing and its better than
keeping track of when the empty flush frames appear.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This is in the same the same vein as 380146924e.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
libavcodec/x86/rv40dsp_init.c:97:2: warning: ISO C does not allow extra ‘;’ outside of a function [-Wpedantic]
libavcodec/x86/vp9dsp_init.c:94:40: warning: ISO C does not allow extra ‘;’ outside of a function [-Wpedantic]
Similarly, merge it back before returning.
Fixes ticket #5927.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This fixes errors like this when building non-pic binaries with armv6
as baseline:
Error: invalid literal constant: pool needs to be closer
Signed-off-by: Martin Storsjö <martin@martin.st>
This is in the same the same vein as c981b1145a.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Adds the new av_hwframe_map() function, which allows mapping between
hardware frames and normal memory, along with internal support for
implementing it.
Also adds av_hwframe_ctx_create_derived(), for creating a hardware
frames context associated with one device using frames mapped from
another by some hardware-specific means.
According to spec ISO_IEC_15444_12 "For any media stream for which no segment index is present, referred to as non‐indexed stream, the media stream associated with the first Segment Index box in the segment serves as a reference stream in a sense that it also describes the subsegments for any non‐indexed media stream."
Signed-off-by: Sasi Inguva <isasi@google.com>
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
libavcodec/ituh263dec.c(215) : warning C4028: formal parameter 1 different from declaration
libavcodec/ituh263dec.c(215) : warning C4028: formal parameter 2 different from declaration
This makes it match the pattern already used for VP8 MC functions.
This also makes the signature match ffmpeg's version of these
functions, easing porting of code in both directions.
Signed-off-by: Martin Storsjö <martin@martin.st>
Why on earth the hardware returns garbage for the first sample of
a decoded picture is anyone's guess. The simplest reasonable way
to patch it up is to copy the first sample of the second line. This
should result in the correct chroma values (because the data was
original 4:2:0 upsampled to 4:2:2) even if the luma is isn't.
Also adds a new flag to mark filters which are aware of hwframes and
will perform this task themselves, and marks all appropriate filters
with this flag.
This is required to allow software-mapped hardware frames to work,
because we need to have the frames context available for any later
mapping operation in the filter graph.
The output from the filter graph should only propagate further to an
encoder if the hardware format actually matches the visible format
(mapped frames are valid here and have an hw_frames_ctx, but this
should not be given to the encoder as its hardware context).
This avoids potential rounding errors and guarantees the source aspect
ratio is preserved.
Keep writing pixel values when Stereo 3D Mode is enabled and for WebM,
as the format doesn't support anything else.
This fixes ticket #5743, implementing the suggestion from ticket #5903.
Signed-off-by: James Almer <jamrial@gmail.com>
This matrix needs to be applied after all others have (currently only
display matrix from trak), but cannot be handled in movie box, since
streams are not allocated yet. So store it in main context, and apply
it when appropriate, that is after parsing the tkhd one.
Fate tests are updated accordingly.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This is needed for improved fate testing and it is modeled after
-show_format_entry. The main behavioral difference is that when a print
function is called with an empty key, rather than discarding it, the
closes key in the hierarchy is used instead.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The use of TLSv1_*_method() disallows newer protocol versions; instead
use SSLv23_*_method() and then explicitly disable the deprecated
protocol versions which should not be supported.
This fixes creating apng files, which is broken since commit
5ef1959080.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Since avversion.h is a generated header it must be created before
dependencies can be determined as a side effect of compilation.
Otherwise Make stops and restarts the build process to generate
avversion.h and produces related error messages.
When the macro is expanded with a semicolon following it and the
macro itself contains a semicolon, we ended up in double semicolons,
which is treated as a statement that disallows further declarations.
This avoids errors about mixed declarations and statements on gcc,
after ee05079766.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is intended to workaround bug "665 Integer Divide Instruction May
Cause Unpredictable Behavior" on some early AMD CPUs, which causes a
div-by-zero in this codepath, such as reported in Mozilla bug #1293996.
Note that this isn't guaranteed to fix the bug, since a compiler is free
to reorder instructions that don't depend on each other. However, it
appears to fix the bug in Firefox, and a similar patch was applied to
libvpx also (see Chrome bug #599899).
When decoding interlaced pictures, the structure is reused to render
to the same surface twice. The parameter buffers were not being
cleared, which caused the i965 driver to error out.
This allows a consumer to run the muxer's init function without actually
writing the header, which is useful in chained muxers that support
automatic bitstream filtering.
It is negative, so can't be used for left shifting.
This fixes ubsan runtime error: shift exponent -1 is negative
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Thanks to Mathieu Malaterre <malat@debian.org> for reporting the
Que/Queue typo. (https://bugs.debian.org/839542)
Reviewed-by: Lou Logan <lou@lrcd.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
For 'nclx', the latest edition of the standard switched from JPEG XR
to 23001-8, which matches the current order of our entries. Bounds
are preserved as a sanity check.
For 'nclc', qtff edition 2016-09-13 introduced a few new entries.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Also check for possible overflows.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Performance improvements:
quant_bands:
with: 681 decicycles in quant_bands, 8388453 runs, 155 skips
without: 1190 decicycles in quant_bands, 8388386 runs, 222 skips
Around 42% for the function
Twoloop coder:
abs_pow34:
with/without: 7.82s/8.17s
Around 4% for the entire encoder
Both:
with/without: 7.15s/8.17s
Around 12% for the entire encoder
Fast coder:
abs_pow34:
with/without: 3.40s/3.77s
Around 10% for the entire encoder
Both:
with/without: 3.02s/3.77s
Around 20% faster for the entire encoder
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: James Almer <jamrial@gmail.com>
x29 (FP) is a callee saved register and should be restored on
return. Instead of backing up x29 and restoring it here, back up
sp in a register that we are allowed to overwrite.
This fixes crashes in checkasm on aarch64 since f1b3e13138.
For some reason, gcc builds didn't crash, but clang builds do.
Signed-off-by: Martin Storsjö <martin@martin.st>
mov_finalize_stsd_codec parses stream information from the ALAC extradata,
so run it after the extradata processing is completed in mov_read_stsd.
Fixes playback of 96kHz ALAC streams muxed by qaac or the reference alac encoder.
Fixes trac ticket #5826
Even if MAX_ARGS - 2 (for arm) or MAX_ARGS - 7 (for aarch64) parameters
are passed on the stack to checkasm_checked_call, we actually only
need to store MAX_ARGS - 4 (for arm) or MAX_ARGS - 8 (for aarch64)
parameters on the stack when calling the tested function.
Signed-off-by: Martin Storsjö <martin@martin.st>
The code works just fine regardless of unit, so only make sure DisplayUnit
is not "unknown".
Found-by: Nicolas George <george@nsup.org>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: James Almer <jamrial@gmail.com>
Using lfg was an overkill in this case where the random numbers
were only used for encoder descisions. Should increase result
uniformity between different FPUs and gives a slight speedup.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The spec says:
"Mandatory elements with a default value may be left out of the file. In the absence
of a mandatory element, the element's default value is used."
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit '32c8359093d1ff4f45ed19518b449b3ac3769d27':
lavc: export the timestamps when decoding in AVFrame.pts
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Decoders have previously not used AVFrame.pts, and with the upcoming
deprecation of pkt_pts (in favor of pts), this would lead to an errorneous
interpration of timestamps.
The decoding buffer index expected by D3D11VA is the one from the
ID3D11Texture2D not the one from the ID3D11VideoDecoderOutputView array
in AVD3D11VAContext.
Otherwise, when providing decoder slices that do not start from 0,
pictures appear in bogus order. For an invalid index crashes and
image corruption can occur.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Full width text is really difficult to read, this makes it more
more legible on larger (widescreen) screens. It also means we aren't
inventing our own container instead of using the bootstrap one.
Signed-off-by: Josh de Kock <josh@itanimul.li>
Also use (float **) instead of (float (*)[2]). This matches the matrix
layout in libavresample so we can reuse assembly code between the two.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Found-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This allows better checking of capabilities and will make it easier
to add more functionality later.
It also commonises some duplicated code around rate control setup
and adds more comments explaining the internals.
Follow a 420, 422, 444 order instead of a random one.
This simplifies double-checking additions of new formats.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This commit is initially largely based on commit 4426540 from Anton
Khirnov <anton@khirnov.net> and two following fixes (80fb19b and
fe7b21c) which were previously skipped respectively in 98e3153, c9ee36e,
and 7fe7cdc.
mpeg4-bsf-unpack-bframes FATE reference is updated because the bsf
filter now actually fixes the extradata (mpeg4_unpack_bframes_init()
changing one byte is now honored on the output extradata).
The FATE references for remove_extra change because the packet flags
were wrong and the keyframes weren't marked, causing the bsf relying on
these proprieties to not actually work as intended.
The following was fixed by James Almer:
The filter option arguments are now also parsed correctly.
A hack to propagate extradata changed by bitstream filters after the
first av_bsf_receive_packet() call is added to maintain the current
behavior. This was previously done by av_bitstream_filter_filter() and
is needed for the aac_adtstoasc bsf.
The exit_on_error was not being checked anymore, and led to an exit
error in the last frame of h264_mp4toannexb test. Restoring this
behaviour prevents erroring out. The test is still changed as a result
due to the badly filtered frame now not being written after the failure.
Signed-off-by: Clément Bœsch <u@pkh.me>
Signed-off-by: James Almer <jamrial@gmail.com>
And use a macro to reduce the boilerplate.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This version, which is the only one doing two processing cycles per loop
iteration, computes the load/store indices incorrectly for the second
cycle.
CC: libav-stable@libav.org
This is the assumption that is made in pixel format conversion do
throughout the code (in particular swscale), and BT-specifications
mandate.
Add a warning to inform the user that an automatic selection is being
made.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Add an option to specify HTTP header in the WebM Chunk Muxer (this
works the same way as the 'method' parameter in the HLS muxer).
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This was introduced in bc2a32969e.
The whole block that the statement was added to is only
relevant when used as a demuxer, but the other statements
there have had other if statements guarding them. Make
sure to only run this whole block if being used as a
demuxer.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids SIMD-optimized functions having to sign-extend their
line size argument manually to be able to do pointer arithmetic.
Also adjust parameter names to be "stride" everywhere.
Allows to use values returned from API and from ffprobe directly.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
The latter can do everything the former can do, but also handle conditions
the former cannot like multiple header #includes and checking for headers
and functions in a single test program, which is necessary for certain
library tests.
With some old libva versions <va/va.h> does not automatically include
the per-codec subsidiary headers, so we need to include the right one
explicitly ourselves.
cuvid/nvdecode also supports mpeg1, mpeg2, h.263/mpeg4-asp and mjpeg.
It should, in theory, also support wmv3 via the vc1 support, given
that vdpau supports this. However, it failed to play wmv3 samples
which vdpau played correctly, so I'm not sure what to make of it.
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
The filter needs input frames with color properties filled out by
the decoder. Since this is not always possible, add input options to
the filter so that user may override color space, color primaries,
transfer characteristics, and color range, as well as a generic option
to set all properties at once.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Allows testing simple_idct12 correctness/bitexactness, as the sample
was generated using faani as idct.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When use append_list mode, the hls_init_time set nouse,
Because the append_list only support append at the old m3u8 end
cannot set init segments durations at the middle of the list.
That's invalid. and show a warning message for user.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
A number of new pix_fmts have been added to AviSynth+:
16-bit packed RGB and RGBA
10-, 12-, 14, and 16-bit YUV 4:2:0, 4:2:2, and 4:4:4
8-, 10-, 12-, 14-, and 16-bit Planar RGB
8-, 10-, 12-, 14-, and 16-bit Planar YUVA and Planar RGBA*
10-, 12-, 14-, and 16-bit GRAY variants*
32-bit floating point Planar YUV(A), Planar RGB(A), and GRAY*
*some of which are not currently available pix_fmts here and were
not added to the demuxer due to this
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
After init_opts() there needs to be an uninit_opts() call
to free the swscale context and other buffers.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This breaks files with legitimate single-entry edit lists,
and the hack, introduced in f03a081df0,
has no link to any known sample in its commit message.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The actual implementation uses ':' divider, not '/' as
documented.
Signed-off-by: Jan Sebechlebsky <sebechlebskyjan@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This makes it easier to use the lowres option when dealing with input
files in different codecs. If the codec doesn't support lowres=1 for
instance, it will throw a warning and use lowres=0 instead of erroring
out completely.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Not from the underlying frame. Fixes races with frame threading in
field-coded files, where decoding would wait for the wrong field (e.g.
random failures in mixed-nal-coding).
Bug-Id: 954
This will be used to allow writing file sequences using the tee output onto
multiple places in parallel
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This reverts commit 25bacd0a0c.
Since 230b1c070, the bytewise AV_W*() macros only expand their
argument once, so revert to the more readable version of these.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids issues with expanding the argument multiple times,
and makes sure that it is of the right type for the following shifts.
Even if the caller of a macro could be expected not to pass parameters
that have side effects if expanded multiple times, these fallback
codepaths are rarely, if ever, tested, so it is expected that such
issues can arise.
Thefore, for safety, make sure the fallback codepaths only expand
the arguments once.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add an AVOption stats_version with a new header for V2 stats, which
specifies the stats log version and lists the fields that will be
present in the log (to ease parsing).
The primary motivation is to facilitate the addition of optional fields
to the log without breaking backwards compatibility, while making the
logs easier to parse.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If a JNI environment is not already attached to the thread where the
MediaCodec calls are made the current implementation will attach /
detach an environment for each MediaCodec call wasting some CPU time.
ff_jni_get_env replaces ff_jni_{attach,detach} by permanently attaching
an environment (if it is not already the case) to the current thread.
The environment will be automatically detached at the thread destruction
using a pthread_key callback.
Saves around 5% of CPU time (out of 20%) while decoding a stream with
MediaCodec.
This allows doing this redirection, if building with clang against
old enough MSVC headers that lack strtoll (2012 and older).
Signed-off-by: Martin Storsjö <martin@martin.st>
When seeking a file where codec delay is greater than 0, the timecode
can become negative after offsetting by the codec delay. Failing to cast
to a signed int64 will cause the check against skip_to_timecode to evaluate
true for these negative values. This breaks the "skip_to" seek mechanism.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When targeting COFF (windows), clang doesn't support this
directive (while binutils supports it for all targets).
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes retrieving a valid profile for many of the FATE conformance samples,
allowing them to be properly decoded by the HWAccel after adding a profile check.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
These bits are set by exceptions in NEON instructions.
Also print the differing bits when FPSCR is clobbered,
and use bic instead of lsl, for clearing the topmost bits.
Signed-off-by: Martin Storsjö <martin@martin.st>
Each const block needs to be terminated by one endconst
invocation so either call endconst after each, or just
declare plain labels to the later strings.
This fixes errors such as this, on some binutils versions:
checkasm.S:38: Error: Macro `endconst' was already defined
Signed-off-by: Martin Storsjö <martin@martin.st>
It is an internal swscale symbol and thus should not be exported.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
... and attempt to preserve compatibility with clang that was
introduced in 311a953c76 (untested)
Reviewed-by: "Ronald S. Bultje" <rsbultje@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Shifting by more than 63 bits is undefined behavior, athough any
compiler not returning 0 after shifting by any amount would be insane.
Found by Coverity, fixes CID1363959 and CID1363960
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Fixes a regression in ca2f19b9cc with some mov/mp4 files. The files have
several NAL units in the supposed single NAL unit after the size field.
Annex B start code prefixes are used to separate them. The first NAL unit
is correctly parsed but the buffer does not point to the next size field.
Instead semi random data (it seems to be the rbsp_stop_one_bit and the
start code prefix) is then parsed as length and will exceed the
remaining length of the buffer.
Patch based on the code in h264's decode_nal_units() and a similar
patch by Hendrik Leppkes in FFmpeg (a9bb4cf87d).
Bug-Id: ffmpeg/trac5529
Reported-By: Vittorio Giovara
This is an - once again - updated patch, that uses avio_write instead
of avio_puts to stream clean text output without null characters. Works
now for me as intended.
Changes metadata filter to accept general urls as file argument without
breaking former behaviour. As a byproduct, it also allows for writing to
file "-" if specified as "file:-".
Example:
ffmpeg -i test.wav -filter_complex "silencedetect=n=-40dB:d=0.1,ametadata=mode=print:file='pipe\:4'" -f null
Signed-off-by: Sami Hult <sami.hult@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The driver being used is detected inside av_hwdevice_ctx_init() and
the quirks field then set from a table of known device. If this
behaviour is unwanted, the user can also set the quirks field
manually.
Also adds the Intel i965 driver quirk (it does not destroy parameter
buffers used in a call to vaRenderPicture()) and detects that driver
to set it.
P010 is the 10-bit variant of NV12 (planar luma, packed chroma), using two
bytes per component to store 10-bit data plus 6-bit zeroes in the LSBs.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This avoids listing the same feature multiple times in the
test output. Previously the output contained something like this:
SSE2:
- hevc_mc.qpel [OK]
- hevc_mc.epel [OK]
- hevc_mc.unweighted_pred [OK]
- hevc_mc.qpel [OK]
- hevc_mc.epel [OK]
- hevc_mc.unweighted_pred [OK]
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'e47b8bbf0b54599d44b9330eb4d68cdde4f6d298':
avcodec: Bump micro version after changing public JPEG 2000 defines
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Setting the filter input parameters is moved to init_input_stream(),
so that it is done before the decoder is opened, potentially overwriting
the information from avformat_find_stream_info() with less accurate
data.
This commit temporarily disables QSV transcoding with hw frames. The
functionality will be re-added in the following commits.
* commit 'c0f4c7db9fea1c07d290a298b8db858b7ceed96d':
configure: move the hardware accel libs' entries in the help text
Merged-by: Clément Bœsch <u@pkh.me>
* commit 'db7968bff4851c2be79b15b2cb2ae747424d2fca':
avio: Allow custom IO users to get labels for the output bytestream
Merged-by: Matthieu Bouron <matthieu.bouron@stupeflix.com>
* commit '0c4468dc185fa8b9e7d6add914595c5e928b24fd':
stereo3d: Add API to get name from value or value from name
Merged-by: Clément Bœsch <clement@stupeflix.com>
this removes the need to probe to discover aac streams
inside mpegts containers, thus speeding up initial playback.
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently it's exported as AVFrame.pkt_pts, which is also the only use
for that field. The reason it is done like this is that lavc used to
export various codec-specific "timing" information in AVFrame.pts, which
is not done anymore.
Since it is confusing to the callers to have a separate field which is
used only for decoder timestamps and nothing else, deprecate pkt_pts and
use just AVFrame.pts everywhere.
* commit '015c2d923902fcd562571993eaf1231ce388c7f0':
libopencore-amr: Fix ff_dlog()/av_log() invocations
The log changed in our tree in 4a28962454
is kept as is since it's the correct thing to do (the log mentions what
the first byte *was*, so it's refering to the source packet, not the
encoded bitstream).
Merged-by: Clément Bœsch <clement@stupeflix.com>
* commit '5b1409c75563b4a3aca113c34d09e3b5442de47f':
fate: Add test for MSS1
Test was already present, see 849e55e58e.
The merge removes the audio decoding present in our version and
simplifies the rules.
Merged-by: Clément Bœsch <clement@stupeflix.com>
* commit '2e5bde956519ae19cedfa482e199518e495bcaf5':
h264: eliminate max_contexts
This commit is a noop as max_contexts can change and mismatch the
nb_slice_ctx (see 507b01f899).
The file in the Ticket is not decodable anymore, so it was not possible
to check if that code path was triggerable some way or another, or even
test a different fix.
Merged-by: Clément Bœsch <clement@stupeflix.com>
Replace the decoder-global nal_unit_type/nal_ref_idc variables with the
per-NAL ones. The decoder-global ones still cannot be removed because
they are used by hwaccels.
* commit '728d90a0c1973661a9e73da697bf4f90c9d19577':
h264: decouple h264_sei from the h264 decoder
Main changes:
- SEI decoding doesn't have access to the debug flag in the codec context so a
few logging are dropped.
- naming of quincunx_sampling_flag and frame_packing_arrangement_type are kept
as they are in FFmpeg instead of respectively quincunx_subsampling and
arrangement_type used in Libav because the former match the specifications.
- don't reset the x264 build info once read in order to fix
fate-h264-lossless (change by Hendrik)
- H264Context.has_recovery_point and deprecated
AVCodecContext.dtg_active_format are set after ff_h264_sei_decode()
based on the SEI state since ff_h264_sei_decode() doesn't have access
to H264Context anymore.
- frame_packing_arrangement_type is not checked against <= 0 in
decode_postinit() since it is always read as a positive value with
get_bits(). This fixes a -Wtype-limits warning by GCC spotted by
Michael.
Side Notes:
- tested that ffprobe on the file from ticket #3652 still returns 4
keyframes
- tested that playback from ticket #3063 still works
Merged-by: Clément Bœsch <clement@stupeflix.com>
Signed-off-by: Hendrik Leppkes <h.leppkes@gmail.com>
openvela-robot