Ditch the old priority scheme for ordering filters, instead explicitly
mark up before/after constraints.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
The basic APIs for the CRL Reloading features.
This adds external types to represent CRL Providers, CRLs, and
CertificateInfo.
Internally we will use `CrlImpl` - this layer is needed to hide OpenSSL
details from the user.
GRFC - https://github.com/grpc/proposal/pull/382
Things Done
* Add external API for `CrlProvider`, `Crl`, `CertInfo` (`CertInfo` is
used during CRL lookup rather than passing the entire certificate).
* Add code paths in `ssl_transport_security` to utilize CRL providers
* Add `StaticCrlProvider`
* Refactor `crl_ssl_transport_security_test.cc` so it is more extensible
and can be used with providers
Instead of fixing a target size for writes, try to adapt it a little to
observed bandwidth.
The initial algorithm tries to get large writes within 100-1000ms
maximum delay - this range probably wants to be tuned, but let's see.
The hope here is that on slow connections we can not back buffer so much
and so when we need to send a ping-ack it's possible without great
delay.
Experiment 1: On RST_STREAM: reduce MAX_CONCURRENT_STREAMS for one round
trip.
Experiment 2: If a settings frame is outstanding with a lower
MAX_CONCURRENT_STREAMS than is configured, and we receive a new incoming
stream that would exceed the new cap, randomly reject it.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Isolate ping callback tracking to its own file.
Also takes the opportunity to simplify keepalive code by applying the
ping timeout to all pings.
Adds an experiment to allow multiple pings outstanding too (this was
originally an accidental behavior change of the work, but one that I
think may be useful going forward).
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
More changes as part of the dualstack design:
- Change resolver and LB policy APIs to support multiple addresses per
endpoint. Specifically, replace `ServerAddress` with
`EndpointAddresses`, which encodes more than one address. Per-address
channel args are retained at the same level, so they are now
per-endpoint. For now, `EndpointAddress` provides a single-address ctor
and a single-address accessor for backward compatibility, so
`ServerAdress` is an alias for `EndpointAddresses`; eventually, this
alias and the single-address methods will be removed.
- Add an `EndpointAddressSet` class, which represents an unordered set
of addresses to be used as a map key. This will be used in a number of
LB policies that need to store per-endpoint state.
- Change the LB policy API's `ChannelControlHelper::CreateSubchannel()`
method to take the address and per-endpoint channel args as separate
parameters, so that we don't need to construct a legacy `ServerAddress`
object as we create a new subchannel for each address in the endpoint.
- Change pick_first to flatten the address list.
- Change ring_hash to use `EndpointAddressSet` as the key for its
endpoint map, and to use the first address of the endpoint as the hash
key.
- Change WRR to use `EndpointAddressSet` as the key for its endpoint
weight map.
Note that support for multiple addresses per endpoint is guarded in RR
by the existing `round_robin_delegate_to_pick_fist` experiment and in
WRR by the existing `wrr_delegate_to_pick_first` experiment.
This PR does *not* include support for multiple addresses per endpoint
for the outlier_detection or xds_override_host LB policies; those will
come in subsequent PRs.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Expand our fuzzing capabilities by allowing fuzzers to choose the bits
that go into random number distribution generators.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Reverts grpc/grpc#34361
Not sure why CI didn't capture it and why my previous test works, but
looks like it broke at least src/objective-c/examples/SwiftSample build.
Will see how CI goes in this PR.
This has been stable for a bit, everywhere that the EventEngine is
enabled. Going forward, I think the event_engine_{client|listener}
experiments can probably be used to regulate thread-pool-specific
issues.
---------
Co-authored-by: drfloob <drfloob@users.noreply.github.com>
Most recent attempt was #34320, reverted in #34335.
The first commit here is a pure revert. The second commit fixes the
outlier_detection unit test to pass both with and without the
experiment.
This is a follow up to https://github.com/grpc/grpc/pull/34103
That pull request explicitly aimed to introduce shared library builds
for Windows (DLLs) while effecting zero material change to the existing
build pipelines. That aspiration meant that the grpc++_unsecure library
had to be effectively excluded from the build (because including it
would have also included a dependency on openssl, which makes no sense
given its purpose)
This PR addresses that by:
* Extracting the single function in grpc_tls_certificate_provider with a
dependency on openssl into a separate compilation unit
* Including that new .cc file into the grpc library
* Including grpc_tls_certificate_provider and one other source file into
grpc_unsecure for the Windows DLL build only.
* Reinstating the grpc++_unsecure library which is a prerequisite for
many tests.
* Regenerating all files affected by the changes in Bazel BUILD that
introduce the new source file.
This change does affect the operation of other build pipelines - I have
confirmed that it does not break the Linux Bazel build.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Reverts grpc/grpc#34325
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
… c-ares versions (#34314)"
This reverts commit eb37b91072.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Tested by changing c-ares to `1.14.0` in Bazel dependency and verify
that the `posix_event_engine_test` build. The test would fail though
since c-ares versions < `1.16.0` does not come with address sorting
capability so the relevant test cases will fail. But this is probably
sufficient to make the Cloud C++ CI job pass and unblock the 1.58
release.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Building out a new framing layer for chttp2.
The central idea here is to have the framing layer be solely responsible
for serialization of frames, and their deserialization - the framing
layer can reject frames that have invalid syntax - but the enacting of
what that frame means is left to a higher layer.
This class will become foundational for the promise conversion of chttp2
- by eliminating action from the parsing of frames we can reuse this
sensitive code.
Right now the new layer is inactive - there's a test that exercises it
relatively well, and not much more. In the next PRs I'll add an
experiments to enable using this layer or the existing code in the
writing and reading paths.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Proposed alternative to https://github.com/grpc/grpc/pull/34024.
This version has a simpler, faster busy-count implementation based on a
sharded set of atomic counts: fast increment/decrement operations,
relatively slower summation of total counts (which need to happen much
less frequently).
- Extract build metadata for some external dependencies from bazel
build. This is achieved by letting extract_metadata_from_bazel_xml.py
analyze some external libraries and sources. The logic is basically the
same as for internal libraries, I only needed to teach
extract_metadata_from_bazel_xml.py which external libraries it is
allowed to analyze.
* currently, the list of source files is automatically determined for
`z`, `upb`, `re2` and `gtest` dependencies (at least for the case where
we're building in "embedded" mode - e.g. mostly native extensions for
python, php, ruby etc. - cmake has the ability to replace some of these
dependencies by actual cmake dependency.)
- Eliminate the need for manually written gen_build_yaml.py for some
dependencies.
- Make the info on target dependencies in build_autogenerated.yaml more
accurate and complete. Until now, there were some depdendencies that
were allowed to show up in build_autogenerated.yaml and some that were
being skipped. This made generating the CMakeLists.txt and Makefile
quite confusing (since some dependencies are being explicitly mentioned
and some had to be assumed by the build system).
- Overhaul the Makefile
* the Makefile is currently only used internally (e.g. for ruby and PHP
builds)
* until now, the makefile wasn't really using the info about which
targets depend on what libraries, but it was effectively hardcoding the
depedendency data (by magically "knowing" what is the list of all the
stuff that e.g. "grpc" depends on).
* After the overhaul, the Makefile.template now actually looks at the
library dependencies and uses them when generating the makefile. This
gives a more correct and easier to maintain makefile.
* since csharp is no longer on the master branch, remove all mentions of
"csharp" targets in the Makefile.
Other notable changes:
- make extract_metadata_from_bazel_xml.py capable of resolving workspace
bind() rules (so that it knows the real name of the target that is
referred to as e.g. `//external:xyz`)
TODO:
- [DONE] ~~pkgconfig C++ distribtest~~
- [DONE} ~~update third_party/README to reflect changes in how some deps
get updated now.~~
Planned followups:
- cleanup naming of some targets in build metadata and buildsystem
templates: libssl vs boringssl, ares vs cares etc.
- further cleanup of Makefile
- further cleanup of CMakeLists.txt
- remote the need from manually hardcoding extra metadata for targets in
build_autogenerated.yaml. Either add logic that determines the
properties of targets automatically, or use metadata from bazel BUILD.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Our current implementation of `Seq`, `TrySeq` leverage some complicated
template stuff to work, which makes them hard to maintain. I've been
thinking about ways to simplify that for some time and had something
like this in mind - using a code generator that's at least a little more
understandable to code generate most of the complexity into a file that
is checkable.
Concurrently - I have a cool optimization in mind - but it requires that
we can move promises after polling, which is a contract change. I'm
going to work through the set of primitives we have in the coming weeks
and change that contract to enable the optimization.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Implement DNS using dns service for iOS.
Current limitation:
1. Using a custom name server is not supported.
2. Only supports `LookupHostname`. `LookupSRV` and `LookupTXT` are not
implemented.
3. Not tested with single stack (ipv4 or ipv6) environment
4. ~Not tested with multiple ip records per stack~ manually tested with
wsj.com
5. Not tested with multiple interface environment
Resolves a set of failures seen rolling out promises - we need to read
all of the incoming payload before doing request matching.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Why: Cleanup for chttp2_transport ahead of promise conversion - lots of
logic has become interleaved throughout chttp2, so some effort to
isolate logic out is warranted ahead of that conversion.
What: Split configuration and policy tracking for each of ping rate
throttling and abuse detection into their own modules. Add tests for
them.
Incidentally: Split channel args into their own header so that we can
split the policy stuff into separate build targets.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This PR implements a c-ares based DNS resolver for EventEngine with the
reference from the original
[grpc_ares_wrapper.h](../blob/master/src/core/ext/filters/client_channel/resolver/dns/c_ares/grpc_ares_wrapper.h).
The PosixEventEngine DNSResolver is implemented on top of that. Tests
which use the client channel resolver API
([resolver.h](../blob/master/src/core/lib/resolver/resolver.h#L54)) are
ported, namely the
[resolver_component_test.cc](../blob/master/test/cpp/naming/resolver_component_test.cc)
and the
[cancel_ares_query_test.cc](../blob/master/test/cpp/naming/cancel_ares_query_test.cc).
The WindowsEventEngine DNSResolver will use the same EventEngine's
grpc_ares_wrapper and will be worked on next.
The
[resolve_address_test.cc](https://github.com/grpc/grpc/blob/master/test/core/iomgr/resolve_address_test.cc)
which uses the iomgr
[DNSResolver](../blob/master/src/core/lib/iomgr/resolve_address.h#L44)
API has been ported to EventEngine's dns_test.cc. That leaves only 2
tests which use iomgr's API, notably the
[dns_resolver_cooldown_test.cc](../blob/master/test/core/client_channel/resolvers/dns_resolver_cooldown_test.cc)
and the
[goaway_server_test.cc](../blob/master/test/core/end2end/goaway_server_test.cc)
which probably need to be restructured to use EventEngine DNSResolver
(for one thing they override the original grpc_ares_wrapper's free
functions). I will try to tackle these in the next step.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
This reverts the following PRs: #32692#33087#33093#33427#33568
These changes seem to have introduced some flaky crashes. Reverting
while I investigate.
In preparation for implementing the promise based version, separate out
the legacy call data from the filter.
There are two commits here, each representing one phase of this code
movement:
66676d398c moves `class RetryFilter` into
the header and the vtable name into that class, as this will be shared
code between the implementations
4c84f115ad then moves `class
RetryFilter::CallData` into `class RetryFilterLegacyCallData`, and moves
*that* into its own file
Doing so makes me less confused as to what I'm editing going forward.
No functionality should be affected.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
More work on the dualstack backend design:
- Change ring_hash policy to delegate to pick_first instead of creating
subchannels directly.
- Note that, as mentioned in the WIP gRFC, because we lazily create the
pick_first child policies, so there's no need to swap over to a new list
as an atomic whole. As a result, we don't use the endpoint_list library
in this policy; instead, we just update a map in-place.
- Remove now-unused subchannel_list library.
More work on the dualstack backend design:
- Change round_robin to delegate to pick_first instead of creating
subchannels directly.
- Change pick_first such that when it is the child of a petiole policy,
it will unconditionally start a health watch.
- Change the client-side health checking code such that if client-side
health checking is not enabled, it will return the subchannel's raw
connectivity state.
- As part of this, we introduce a new endpoint_list library to be used
by petiole policies, which is intended to replace the existing
subchannel_list library. The only policy that will still directly
interact with subchannels is pick_first, so the relevant parts of the
subchannel_list functionality have been copied directly into that
policy. The subchannel_list library will be removed after all petiole
policies are updated to delegate to pick_first.
The address attribute interface was intended to provide a mechanism to
pass attributes separately from channel args, for values that do not
affect subchannel behavior and therefore do not need to be present in
the subchannel key, which does include channel args. However, the
mechanism as currently designed is fairly clunky and is probably not the
direction we will want to go in the long term.
Eventually, we will want some mechanism for registering channel args,
which would provide a cleaner way to indicate that a given channel arg
should not be used in the subchannel key, so that we don't need a
completely different mechanism. For now, this PR is just doing an
interim step, which is to establish a special channel arg key prefix to
indicate that an arg is not needed in the subchannel key.
Revert "Revert "[core] Add support for vsock transport"
(https://github.com/grpc/grpc/pull/33276)"
This reverts commit
c5ade3011a.
And fix the issue which broke the python build.
@markdroth @drfloob please review this PR. Thank you very much.
---------
Co-authored-by: AJ Heller <hork@google.com>
The approach of doing a recursive function call to expand the if checks
for known metadata names was tripping up an optimization clang has to
collapse that if/then tree into an optimized tree search over the set of
known strings. By unrolling that loop (with a code generator) we start
to present a pattern that clang *can* recognize, and hopefully get some
more stable and faster code generation as a benefit.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This is another attempt to add support for vsock in grpc since previous
PRs(#24551, #21745) all closed without merging.
The VSOCK address family facilitates communication between
virtual machines and the host they are running on.
This patch will introduce new scheme: [vsock:cid:port] to
support VSOCK address family.
Fixes#32738.
---------
Signed-off-by: Yadong Qi <yadong.qi@intel.com>
Co-authored-by: AJ Heller <hork@google.com>
Co-authored-by: YadongQi <YadongQi@users.noreply.github.com>
Most of these data structures need to scale a bit like per-cpu, but not
entirely. We can have more than one cpu hit the same instance in most
cases, and probably want to cap out before the hundreds of shards some
platforms have.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Upgrade apple platform deployment_target versions to fix the cocoapods
push of BoringSSL-GRPC about the following error:
```
ld: file not found: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/lib/arc/libarclite_macosx.a
clang: error: linker command failed with exit code 1 (use -v to see invocation)
```
ref: https://developer.apple.com/forums/thread/725300
This also aligns with the versions required by
[protobuf](https://github.com/protocolbuffers/protobuf/pull/10652)
```
ios.deployment_target = '10.0'
osx.deployment_target = '10.12'
tvos.deployment_target = '12.0'
watchos.deployment_target = '6.0'
```
This test mode tries to create threads wherever it legally can to
maximize the chances of TSAN finding errors in our codebase.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
The logger uses `absl::FPrintF` to write to stdout. After reading a
number of sources online, I got the impression that `std::fwrite` which
is used by `absl::FPrintF` is atomic so there is no locking required
here.
---------
Co-authored-by: rockspore <rockspore@users.noreply.github.com>
This makes the JSON API visible as part of the C-core API, but in the
`experimental` namespace. It will be used as part of various
experimental APIs that we will be introducing in the near future, such
as the audit logging API.
This PR implements a work-stealing thread pool for use inside
EventEngine implementations. Because of historical risks here, I've
guarded the new implementation behind an experiment flag:
`GRPC_EXPERIMENTS=work_stealing`. Current default behavior is the
original thread pool implementation.
Benchmarks look very promising:
```
bazel test \
--test_timeout=300 \
--config=opt -c opt \
--test_output=streamed \
--test_arg='--benchmark_format=csv' \
--test_arg='--benchmark_min_time=0.15' \
--test_arg='--benchmark_filter=_FanOut' \
--test_arg='--benchmark_repetitions=15' \
--test_arg='--benchmark_report_aggregates_only=true' \
test/cpp/microbenchmarks:bm_thread_pool
```
2023-05-04: `bm_thread_pool` benchmark results on my local machine (64
core ThreadRipper PRO 3995WX, 256GB memory), comparing this PR to
master:
2023-05-04: `bm_thread_pool` benchmark results in the Linux RBE
environment (unsure of machine configuration, likely small), comparing
this PR to master.
---------
Co-authored-by: drfloob <drfloob@users.noreply.github.com>
Reverts grpc/grpc#32924. This breaks the build again, unfortunately.
From `test/core/event_engine/cf:cf_engine_test`:
```
error: module .../grpc/test/core/event_engine/cf:cf_engine_test does not depend on a module exporting 'grpc/support/port_platform.h'
```
@sampajano I recommend looking into CI tests to catch iOS problems
before merging. We can enable EventEngine experiments in the CI
generally once this PR lands, but this broken test is not one of those
experiments. A normal build should have caught this.
cc @HannahShiSFB
Makes some awkward fixes to compression filter, call, connected channel
to hold the semantics we have upheld now in tests.
Once the fixes described here
https://github.com/grpc/grpc/blob/master/src/core/lib/channel/connected_channel.cc#L636
are in this gets a lot less ad-hoc, but that's likely going to be
post-landing promises client & server side.
We specifically need special handling for server side cancellation in
response to reads wrt the inproc transport - which doesn't track
cancellation thoroughly enough itself.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
1. `GrpcAuthorizationEngine` creates the logger from the given config in
its ctor.
2. `Evaluate()` invokes audit logging when needed.
---------
Co-authored-by: rockspore <rockspore@users.noreply.github.com>
Audit logging APIs for both built-in loggers and third-party logger
implementations.
C++ uses using decls referring to C-Core APIs.
---------
Co-authored-by: rockspore <rockspore@users.noreply.github.com>
Third-party loggers will be added in subsequent PRs once the logger
factory APIs are available to validate the configs here.
This registry is used in `xds_http_rbac_filter.cc` to generate service
config json.
This paves the way for making pick_first the universal leaf policy (see
#32692), which will be needed for the dualstack design. That change will
require changing pick_first to see both the raw connectivity state and
the health-checking connectivity state of a subchannel, so that we can
enable health checking when pick_first is used underneath round_robin
without actually changing the pick_first connectivity logic (currently,
pick_first always disables health checking). To make it possible to do
that, this PR moves the health checking code out of the subchannel and
into a separate API using the same data-watcher mechanism that was added
for ORCA OOB calls.
The PR also creates a separate BUILD target for:
- chttp2 context list
- iomgr buffer_list
- iomgr internal errqueue
This would allow the context list to be included as standalone
dependencies for EventEngine implementations.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
@sampajano
The very non-trivial upgrade of third_party/protobuf to 22.x
This PR strives to be as small as possible and many changes that were
compatible with protobuf 21.x and didn't have to be merged atomically
with the upgrade were already merged.
Due to the complexity of the upgrade, this PR wasn't created
automatically by a tool, but manually. Subsequent upgraded of
third_party/protobuf with our OSS release script should work again once
this change is merged.
This is best reviewed commit-by-commit, I tried to group changes in
logical areas.
Notable changes:
- the upgrade of third_party/protobuf submodule, the bazel protobuf
dependency itself
- upgrade of UPB dependency to 22.x (in the past, we used to always
upgrade upb to "main", but upb now has release branch as well). UPB
needs to be upgraded atomically with protobuf since there's a de-facto
circular dependency (new protobuf depends on new upb, which depends on
new protobuf for codegen).
- some protobuf and upb bazel rules are now aliases, so `
extract_metadata_from_bazel_xml.py` and `gen_upb_api_from_bazel_xml.py`
had to be modified to be able to follow aliases and reach the actual
aliased targets.
- some protobuf public headers were renamed, so especially
`src/compiler` needed to be updated to use the new headers.
- protobuf and upb now both depend on utf8_range project, so since we
bundle upb with grpc in some languages, we now have to bundle utf8_range
as well (hence changes in build for python, PHP, objC, cmake etc).
- protoc now depends on absl and utf8_range (previously protobuf had
absl dependency, but not for the codegen part), so python's
make_grpcio_tools.py required partial rewrite to be able to handle those
dependencies in the grpcio_tools build.
- many updates and fixes required for C++ distribtests (currently they
all pass, but we'll probably need to follow up, make protobuf's and
grpc's handling of dependencies more aligned and revisit the
distribtests)
- bunch of other changes mostly due to overhaul of protobuf's and upb's
internal build layout.
TODOs:
- [DONE] make sure IWYU and clang_tidy_code pass
- create a list of followups (e.g. work to reenable the few tests I had
to disable and to remove workaround I had to use)
- [DONE in cl/523706129] figure out problem(s) with internal import
---------
Co-authored-by: Craig Tiller <ctiller@google.com>
Notes:
- `+trace` fixtures haven't run since 2016, so they're disabled for now
(7ad2d0b463 (diff-780fce7267c34170c1d0ea15cc9f65a7f4b79fefe955d185c44e8b3251cf9e38R76))
- all current fixtures define `FEATURE_MASK_SUPPORTS_AUTHORITY_HEADER`
and hence `authority_not_supported` has not been run in years - deleted
- bad_hostname similarly hasn't been triggered in a long while, so
deleted
- load_reporting_hook has never been enabled, so deleted
(f23fb4cf31/test/core/end2end/generate_tests.bzl (L145-L148))
- filter_latency & filter_status_code rely on global variables and so
don't convert particularly cleanly - and their value seems marginal, so
deleted
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
When using this internally, we noticed that it's impossible to use
custom_metadata.h without creating a dependency cycle between
:custom_metadata and :grpc_base.
A full build refactoring is too large right now, so merge that header
into :grpc_base for the time being.
Also, separate `SimpleSliceBasedMetadata` into its own file, so that it
can be reused in custom_metadata.h.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This PR also centralizes the client channel resolver selection. Resolver
selection is still done using the plugin system, but when the Ares and
native client channel resolvers go away, we can consider bootstrapping
this differently.
Aim here is to allow adding custom metadata types to the internal build.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
(hopefully last try)
Add new channel arg GRPC_ARG_ABSOLUTE_MAX_METADATA_SIZE as hard limit
for metadata. Change GRPC_ARG_MAX_METADATA_SIZE to be a soft limit.
Behavior is as follows:
Hard limit
(1) if hard limit is explicitly set, this will be used.
(2) if hard limit is not explicitly set, maximum of default and soft
limit * 1.25 (if soft limit is set) will be used.
Soft limit
(1) if soft limit is explicitly set, this will be used.
(2) if soft limit is not explicitly set, maximum of default and hard
limit * 0.8 (if hard limit is set) will be used.
Requests between soft and hard limit will be rejected randomly, requests
above hard limit will be rejected.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This is a big rewrite of global config.
It does a few things, all somewhat intertwined:
1. centralize the list of configuration we have to a yaml file that can
be parsed, and code generated from it
2. add an initialization and a reset stage so that config vars can be
centrally accessed very quickly without the need for caching them
3. makes the syntax more C++ like (less macros!)
4. (optionally) adds absl flags to the OSS build
This first round of changes is intended to keep the system where it is
without major changes. We pick up absl flags to match internal code and
remove one point of deviation - but importantly continue to read from
the environment variables. In doing so we don't force absl flags on our
customers - it's possible to configure grpc without the flags - but
instead allow users that do use absl flags to configure grpc using that
mechanism. Importantly this lets internal customers configure grpc the
same everywhere.
Future changes along this path will be two-fold:
1. Move documentation generation into the code generation step, so that
within the source of truth yaml file we can find all documentation and
data about a configuration knob - eliminating the chance of forgetting
to document something in all the right places.
2. Provide fuzzing over configurations. Currently most config variables
get stashed in static constants across the codebase. To fuzz over these
we'd need a way to reset those cached values between fuzzing rounds,
something that is terrifically difficult right now, but with these
changes should simply be a reset on `ConfigVars`.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This change mostly aims to get OpenCensus to use the new
ServerCallTracer interface. Note that the interfaces nor the code are in
their final states. There are a bunch of moving pieces, but I thought
this might be a nice mid-step to check-in and make sure that our
internal traces can also work with these changes.
Overall changes -
1) call_tracer.h shows what the hierarchy of new call tracer interfaces
looks like. Open to renaming suggestions.
2) Moved most of the common interface between `CallAttemptTracer` and
`ServerCallTracer` into a common `CallTracerInterface`. We should be
able to eventually move `RecordReceivedTrailingMetadata` and `RecordEnd`
as well to these common interfaces, but it requires some additional
work.
3) The compression filter is now responsible for recording the recv and
send messages for both the subchannel call and the server, and adds in
ability to record compressed and decompressed messages as well.
4) The OpenCensus server filter now uses the new `ServerCallTracer`
interface, and so doesn't need to be a filter anymore.
5) A new ServerCallTracerFilter was added. Ideally, we should be able to
move it to the current connected filter, but it is in a bit of an
interesting state right now, so I would prefer making those changes in a
separate PR with Craig's eyes on it.
6) A new context element `GRPC_CONTEXT_CALL_TRACER_ANNOTATION_INTERFACE`
was created that replaces the old `GRPC_CONTEXT_CALL_TRACER`, and the
new `GRPC_CONTEXT_CALL_TRACER` is mainly to pass the `CallAttemptTracer`
down the stack. This should go away in the new promise-based world.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
<!-- Reviewable:start -->
- - -
This change is [<img src="https://reviewable.io/review_button.svg"
height="34" align="absmiddle"
alt="Reviewable"/>](https://reviewable.io/reviews/grpc/grpc/32618)
<!-- Reviewable:end -->
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Upgrade boringssl to the latest "master-with-bazel"
- use the `'USE_HEADERMAP' => 'NO'` fix for ObjC
- update the key for asm optimizations on mac/apple in python's setup.py
This PR depends on monterey fixes here:
https://github.com/grpc/grpc/pull/32493 and the boringssl's build
simplification
https://boringssl-review.googlesource.com/c/boringssl/+/56465.
---------
Co-authored-by: Hannah Shi <hannahshisfb@gmail.com>
Internal Windows builds will catch issues that we cannot yet catch in
OSS. This will be mostly remedied once we have clang-cl in our CI (See a
rough roadmap in https://github.com/grpc/grpc/pull/32448). For now, this
PR identifies folders where most Windows-specific code is developed, and
requires cherrypicks for PRs that touch anything inside those folders.
This PR also refactors gpr and gprpp source files to better isolate all
platform-specific code ~the Windows-only code~. ~I will reorganize the
other platform-specific files using this structure if there are no
objections.~
This subset of folders covers about half of the `#ifdef GPR_WINDOWS`
usages in gRPC, but nearly all of the actively-developed Windows code
locations.
This code is not plumbed through yet, but it provides the core
infrastructure needed to detect the proper GCP environment resources
needed to set up the labels/attributes/resources for stats, tracing and
logging.
Details on how the various environment resources are setup has been
derived by looking at java's cloud logging library and OpenTelemetry's
future plans. (Could be better explained in an offline review since some
links are internal).
Requesting @veblush for a full review and @markdroth for a structural
review.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
* Revert "Revert "Revert "Revert "server: introduce ServerMetricRecorder API and move per-call reporting from a C++ interceptor to a C-core filter (#32106)" (#32272)" (#32279)" (#32293)"
This reverts commit 1f960697c5.
* Do not create CallMetricRecorder if call is null.
* Revert "Revert "server: introduce ServerMetricRecorder API and move per-call reporting from a C++ interceptor to a C-core filter (#32106)" (#32272)"
This reverts commit deb1e25543.
* Fix by caching call metric recording stuff in async request
PR #32106 caused msan errors in some tests while de-referencing the
server object where async calls are active after the server is
destroyed. Instead cache the ServerMetricRecorder pointer.
* copyright headers fixed
* clang fixes.
* [EventEngine] Add invalid handle types to the public API
* Automated change: Fix sanity tests
* add definition for static constexpr members
* sanitize
Co-authored-by: drfloob <drfloob@users.noreply.github.com>
* WRR: port StaticStrideScheduler to OSS
* WIP
* Automated change: Fix sanity tests
* fix build
* remove unused aliases
* fix another type mismatch
* remove unnecessary include
* move benchmarks to their own file, and don't run it on windows
* Automated change: Fix sanity tests
* add OOB reporting
* generate_projects
* clang-format
* add config parser test
* clang-tidy and minimize lock contention
* add config defaults
* add oob_reporting_period config field and add basic test
* Automated change: Fix sanity tests
* fix test
* change test to use basic RR
* WIP: started exposing peer address to LB policy API
* first WRR test passing!
* small cleanup
* port RR fix to WRR
* test helper refactoring
* more test helper refactoring
* WIP: trying to fix test to have the right weights
* more WIP -- need to make pickers DualRefCounted
* fix timer ref handling and get tests working
* clang-format
* iwyu and generate_projects
* fix build
* add test for OOB reporting
* keep only READY subchannels in the picker
* add file missed in a previous commit
* fix sanity
* iwyu
* add weight expiration period
* add tests for weight update period and OOB reporting period
* Automated change: Fix sanity tests
* lower bound for timer interval
* consistently apply grpc_test_slowdown_factor()
* cache time in test
* add blackout_period tests
* avoid some unnecessary copies
* clang-format
* add field to config test
* simplify orca watcher tracking
* attempt to fix build
* iwyu
* generate_projects
* update xds proto dependency
* add xDS LB policy entry to registry
* add "_experimental" suffix to policy name
* update LB policy name and remove debug log
* add env var protection
* generate_projects
* gen_upb_api
* WRR: update tests to cover qps plumbing
* WIP
* Automated change: Fix sanity tests
* more WIP
* basic WRR e2e test working
* add OOB test
* add xDS WRR e2e test
* clang-format
* fix sanity
* ignore duplicate addresses
* Automated change: Fix sanity tests
* add new tracer to doc/environment_variables.md
* retain scheduler state across pickers
* Automated change: Fix sanity tests
* use separate mutexes for scheduler and timer
* sort addresses to avoid index churn
* remove fetch_sub for wrap around in RR case
Co-authored-by: markdroth <markdroth@users.noreply.github.com>
* WRR: port StaticStrideScheduler to OSS
* WIP
* Automated change: Fix sanity tests
* fix build
* remove unused aliases
* fix another type mismatch
* remove unnecessary include
* move benchmarks to their own file, and don't run it on windows
* Automated change: Fix sanity tests
* add OOB reporting
* generate_projects
* clang-format
* add config parser test
* clang-tidy and minimize lock contention
* add config defaults
* add oob_reporting_period config field and add basic test
* Automated change: Fix sanity tests
* fix test
* change test to use basic RR
* WIP: started exposing peer address to LB policy API
* first WRR test passing!
* small cleanup
* port RR fix to WRR
* test helper refactoring
* more test helper refactoring
* WIP: trying to fix test to have the right weights
* more WIP -- need to make pickers DualRefCounted
* fix timer ref handling and get tests working
* clang-format
* iwyu and generate_projects
* fix build
* add test for OOB reporting
* keep only READY subchannels in the picker
* add file missed in a previous commit
* fix sanity
* iwyu
* add weight expiration period
* add tests for weight update period and OOB reporting period
* Automated change: Fix sanity tests
* lower bound for timer interval
* consistently apply grpc_test_slowdown_factor()
* cache time in test
* add blackout_period tests
* avoid some unnecessary copies
* clang-format
* add field to config test
* simplify orca watcher tracking
* attempt to fix build
* iwyu
* generate_projects
* add "_experimental" suffix to policy name
* WRR: update tests to cover qps plumbing
* WIP
* more WIP
* basic WRR e2e test working
* add OOB test
* fix sanity
* ignore duplicate addresses
* Automated change: Fix sanity tests
* add new tracer to doc/environment_variables.md
* retain scheduler state across pickers
* Automated change: Fix sanity tests
* use separate mutexes for scheduler and timer
* sort addresses to avoid index churn
* remove fetch_sub for wrap around in RR case
Co-authored-by: markdroth <markdroth@users.noreply.github.com>
* Revert "Revert "Add support for systemd socket activation (#30485)" (#31617)"
This reverts commit 867dc6cae2.
* Add checks to unix tests
* Ran generate_projects.sh and fixed styling in test
* Fix variable in unit test
* Use reinterpret_cast in test
* Rebase and fix sanity failures
* rename task-handle mutex
* rename TimerClosure
* tmp commit, building, not tested
* add test for client connection to a non-listening port
* fix posix EE tests
* re-fix windows test suite after posix compatibility
* (unfinished, backup): passing the suite's NonExistingListener client test
* remove redundant windows client test
* integrate IOCP worker loop
* initial commit of echo test tool; fixes
* move echo client to test_suite/tools; I do not yet like the setup, it's about time for a macro that generates all useful test/tool targets
* cleanup
* add --target arg to echo_client. requires URI
* Automated change: Fix sanity tests
* build fixes
* fix
* fix
* reviewer feedback
* warning fix
* delete logic on cancellation
* fix
* cancel connect deadlock; improved template code
* fix build failure with linux environments building windows targets
* fix
* fix
* no ++ for atomics
* remove the test changes, to be landed separately
* Automated change: Fix sanity tests
* remnants
Co-authored-by: drfloob <drfloob@users.noreply.github.com>
apolcyn
