This reverts the following PRs: #32692#33087#33093#33427#33568
These changes seem to have introduced some flaky crashes. Reverting
while I investigate.
As per gRFC A58, when WRR sees a subchannel report READY, it reset the
non_empty_since value, thus restarting the blackout period. However,
there were two cases where we were incorrectly triggering this code:
1. When WRR got an updated address list that contained addresses that
were already present on the old list and whose subchannels were already
in READY state, the initial notification for those subchannels on the
new list was READY, which incorrectly triggered resetting the
non_empty_since value.
2. Due to a bug in the outlier_detection policy, whenever an update was
propagated down through the OD policy without actually enabling OD, it
would incorrectly send a duplicate connectivity state notification for
the subchannels. This meant that a subchannel that was already in state
READY would report READY again, which would also incorrectly trigger
resetting the non_empty_since value.
This PR makes two changes:
1. Fix the bug in outlier_detection that caused it to generate the
spurious duplicate READY updates.
2. Fix WRR to reset the non_empty_since value when a subchannel goes
READY only if the subchannel has seen a previous state update and only
if that previous state was not READY. (The duplicate READY notifications
should not actually happen anymore now that the OD policy has been
fixed, but better to be defensive.)
Fixes b/290983884.
More work on the dualstack backend design:
- Now that all petiole policies have been changed to delegate to
pick_first, outlier detection no longer needs to eject via the
subchannel's raw connectivity state; it can now eject only via the
health state. See #33340.
- This also removes the now-unnecessary hack to explicitly disable
outlier detection in pick_first. See #33336.
More work on the dualstack backend design:
- Change ring_hash policy to delegate to pick_first instead of creating
subchannels directly.
- Note that, as mentioned in the WIP gRFC, because we lazily create the
pick_first child policies, so there's no need to swap over to a new list
as an atomic whole. As a result, we don't use the endpoint_list library
in this policy; instead, we just update a map in-place.
- Remove now-unused subchannel_list library.
More work on the dualstack backend design:
- Change round_robin to delegate to pick_first instead of creating
subchannels directly.
- Change pick_first such that when it is the child of a petiole policy,
it will unconditionally start a health watch.
- Change the client-side health checking code such that if client-side
health checking is not enabled, it will return the subchannel's raw
connectivity state.
- As part of this, we introduce a new endpoint_list library to be used
by petiole policies, which is intended to replace the existing
subchannel_list library. The only policy that will still directly
interact with subchannels is pick_first, so the relevant parts of the
subchannel_list functionality have been copied directly into that
policy. The subchannel_list library will be removed after all petiole
policies are updated to delegate to pick_first.
The address attribute interface was intended to provide a mechanism to
pass attributes separately from channel args, for values that do not
affect subchannel behavior and therefore do not need to be present in
the subchannel key, which does include channel args. However, the
mechanism as currently designed is fairly clunky and is probably not the
direction we will want to go in the long term.
Eventually, we will want some mechanism for registering channel args,
which would provide a cleaner way to indicate that a given channel arg
should not be used in the subchannel key, so that we don't need a
completely different mechanism. For now, this PR is just doing an
interim step, which is to establish a special channel arg key prefix to
indicate that an arg is not needed in the subchannel key.
The following bugs are fixed:
* Missing ExecCtx in event engine endpoints and listeners
* Ref counting issue with iomgr endpoint which causes crashes in
overloaded situations
The PR includes a test which triggers these bugs by simulating an
overloaded system.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Added tests involve:
1. Checking the # of logger invocations with multiple RBACs in the
chain.
2. Verifying content in audit context with action and audit condition
permutations.
3. Confirm custom logger and built-in logger configurations are working.
4. Confirm the feature is protected by the environment variable.
---------
Co-authored-by: rockspore <rockspore@users.noreply.github.com>
- switch to json_object_loader for config parsing
- use `absl::string_view` instead of `const char*` for cert provider
names
- change cert provider registry to use a map instead of a vector
- remove unused mesh_ca cert provider factory
I generated a new client key and cert where a Spiffe ID is added as the
URI SAN. As such, we are able to test the audit log contains the
principal correctly.
Update: I switched to use the test logger to verify the log content and
removed stdout logger here because one the failure of [RBE Windows Debug
C/C++](https://source.cloud.google.com/results/invocations/c3187f41-bb1f-44b3-b2b1-23f38e47386d).
Update again: Refactored the test logger in a util such that the authz
engine test also uses the same logger. Subsequently, xDS e2e test will
also use it.
---------
Co-authored-by: rockspore <rockspore@users.noreply.github.com>
Reverts grpc/grpc#33002. Breaks internal builds:
`.../privacy_context:filters does not depend on a module exporting
'.../src/core/lib/channel/context.h'`
Change call attributes to be stored in a `ChunkedVector` instead of
`std::map<>`, so that the storage can be allocated on the arena. This
means that we're now doing a linear search instead of a map lookup, but
the total number of attributes is expected to be low enough that that
should be okay.
Also, we now hide the actual data structure inside of the
`ServiceConfigCallData` object, which required some changes to the
`ConfigSelector` API. Previously, the `ConfigSelector` would return a
`CallConfig` struct, and the client channel would then use the data in
that struct to populate the `ServiceConfigCallData`. This PR changes
that such that the client channel creates the `ServiceConfigCallData`
before invoking the `ConfigSelector`, and it passes the
`ServiceConfigCallData` into the `ConfigSelector` so that the
`ConfigSelector` can populate it directly.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
This bug occurred when the same xDS server was configured twice in the
same bootstrap config, once in an authority and again as the top-level
server. In that case, we were incorrectly failing to de-dup them and
were creating a separate channel for the LRS stream than the one that
already existed for the ADS stream. We fix this by canonicalizing the
server keys the same way in both cases.
As a separate follow-up item, I will work on trying to find a better way
to key these maps that does not suffer from this kind of fragility.
Expand server promises to run with C++ end2end tests.
Across connected_channel/call/batch_builder/pipe/transport:
- fix a bug where read errors weren't propagated from transport to call
so that we can populate failed_before_recv_message for the c++ bindings
- ensure those errors are not, however, used to populate the returned
call status
Add a new latch call arg to lazily propagate the bound CQ for a server
call (and client call, but here it's used degenerately - it's always
populated). This allows server calls to be properly bound to
pollsets.(1)/(2)
In call.cc:
- move some profiling code from FilterStackCall to Call, and then use it
in PromiseBasedCall (this should be cleaned up with tracing work)
- implement GetServerAuthority
In server.cc:
- use an RAII pattern on `MatchResult` to avoid a bug whereby a tag
could be dropped if we cancel a request after it's been matched but
before it's published
- fix deadline export to ServerContext
In resource_quota_server.cc:
- fix some long standing flakes (that were finally obvious with the new
test code) - it's legal here to have client calls not arrive at the
server due to resource starvation, work through that (includes adding
expectations during a `Step` call, which required some small tweaks to
cq_verifier)
In the C++ end2end_test.cc:
- strengthen a flaky test so it passes consistently (it's likely we'll
revisit this with the fuzzing efforts to strengthen it into an actually
robust test)
(1) It's time to remove this concept
(2) Surprisingly the only test that *reliably* demonstrates this not
being done is time_change_test
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This reverts commit 4b46dbc19e.
Reason: this seems to be breaking load reports in certain cases,
b/276944116
Let's revert so this doesn't accidentally get released.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This reverts commit 7bd9267f32.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
This is a big rewrite of global config.
It does a few things, all somewhat intertwined:
1. centralize the list of configuration we have to a yaml file that can
be parsed, and code generated from it
2. add an initialization and a reset stage so that config vars can be
centrally accessed very quickly without the need for caching them
3. makes the syntax more C++ like (less macros!)
4. (optionally) adds absl flags to the OSS build
This first round of changes is intended to keep the system where it is
without major changes. We pick up absl flags to match internal code and
remove one point of deviation - but importantly continue to read from
the environment variables. In doing so we don't force absl flags on our
customers - it's possible to configure grpc without the flags - but
instead allow users that do use absl flags to configure grpc using that
mechanism. Importantly this lets internal customers configure grpc the
same everywhere.
Future changes along this path will be two-fold:
1. Move documentation generation into the code generation step, so that
within the source of truth yaml file we can find all documentation and
data about a configuration knob - eliminating the chance of forgetting
to document something in all the right places.
2. Provide fuzzing over configurations. Currently most config variables
get stashed in static constants across the codebase. To fuzz over these
we'd need a way to reset those cached values between fuzzing rounds,
something that is terrifically difficult right now, but with these
changes should simply be a reset on `ConfigVars`.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
We currently take named metrics recorded per-request only. Instead we
should merge field-wise.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Vignesh Babu