Expand our fuzzing capabilities by allowing fuzzers to choose the bits
that go into random number distribution generators.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Summary -
On the server-side, we are changing the point at which we decide whether
a method is registered or not from the surface to the transport at the
point where we are done receiving initial metadata and before we invoke
the recv_initial_metadata_ready closures from the filters. The main
motivation for this is to allow filters to check whether the incoming
method is a registered or not. The exact use-case is for observability
where we only want to record the method if it is registered. We store
the information about the registered method in the initial metadata.
On the client-side, we also set information about whether the method is
registered or not in the outgoing initial metadata.
Since we are effectively changing the lookup point of the registered
method, there are slight concerns of this being a potentially breaking
change, so we are guarding this with an experiment to be safe.
Changes -
* Transport API changes -
* Along with `accept_stream_fn`, a new callback
`registered_method_matcher_cb` will be sent down as a transport op on
the server side. When initial metadata is received on the server side,
this callback is invoked. This happens before invoking the
`recv_initial_metadata_ready` closure.
* Metadata changes -
* We add a new non-serializable metadata trait `GrpcRegisteredMethod()`.
On the client-side, the value is a uintptr_t with a value of 1 if the
call has a registered/known method, or 0, if it's not known. On the
server side, the value is a (ChannelRegisteredMethod*). This metadata
information can be used throughout the stack to check whether a call is
registered or not.
* Server Changes -
* When a new transport connection is accepted, the server sets
`registered_method_matcher_cb` along with `accept_stream_fn`. This
function checks whether the method is registered or not and sets the
RegisteredMethod matcher in the metadata for use later.
* Client Changes -
* Set the metadata on call creation on whether the method is registered
or not.
Lets us sever the dependency between stats & exec ctx (finally).
More work likely needs to go into the *mechanism* used here (I'm not a
fan of the per thread index), but that's also something we can address
later.
Changes -
* Remove `csm.remote_workload_pod_name` and
`csm.remote_workload_container_name`.
* Add `csm.remote_workload_name`, the value for which is sent through
MetadataExchange, from the `CSM_WORKLOAD_NAME` env var. (Note that this
is not added in local labels.)
* Add a local `csm.canonical_service` (@markdroth, please verify the key
that we want here) that is read from `CSM_CANONICAL_SERVICE_NAME` env
var, and we continue to send it over via MetadataExchange
Revert the reversion of the SSL_CTX_new change (#34355 reverted #34180 )
with a fix.
There was an issue with using `strcpy` on a `new[] string` in the
constructor of `ssl_credentials`. An ASAN test caught this in some CI
down the line - `ERROR: AddressSanitizer: alloc-dealloc-mismatch
(operator new [] vs free)`
That `strcpy` call was changed to `grp_strdup` which duplicates a string
in a way that can be freed by `gpr_free` and should resolve the ASAN
failure.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
This pull request adds another hook service on the maintenance server.
This will enable clients to gradually migrate from the standalone hook
server.
Changes:
1. Hook service can now be used separately.
2. Copied latest protos and updated the hook service to new API.
3. Added the hook service to the maintenance server.
Working towards testing against CSM Observability. Added ability to
register a prometheus exporter with our Opentelemetry plugin. This will
allow our metrics to be available at the standard prometheus port
`:9464`.
This test assumed synchronous work serializer execution (or at least
faster async than we always get)... make a trivial change to keep the
test semantics but allow for the implementation to be more async.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Move the SSL_CTX to the level of the credentials rather than the
subchannel.
The SSL_CTX should only get created once per credential rather than once
per subchannel.
We should observe no behavior change with this PR, only efficiency
gains.
Most recent attempt was #34320, reverted in #34335.
The first commit here is a pure revert. The second commit fixes the
outlier_detection unit test to pass both with and without the
experiment.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
@ctiller PTAL for core configuration changes. I converted the type from
std::function to absl::AnyInvocable. Do you think the functor in
RegisteredBuilder should be callable just once or multiple times?
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Changes -
1) Change local mesh labels to not be reported on 'started' metrics at
all (even those that we know about) to be consistent. (Since xDS labels
atleast on the server side would not be available on started metric.)
2) Add mesh_id as a local label that is populated by reading the xDS
bootstrap. As part of this, also added a minimal xds bootstrap parsing
logic.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
This should address one of the failures we're seeing in #34224.
The test failure is caused by the changes in timing triggering a race
condition. In the code at head, we delay sending out the subscription
for the first CDS watch until we've already seen the other two CDS
watches, because the previous send_message op has not yet completed, and
by the time it does, we've seen all 3 watches, so we can send a
subscription for all 3 at the same time. With the WorkSerializer change,
the send_message op is complete by the time we see the first CDS watch,
so we subscribe to only that resource, and then later add the other two.
The result is that we'll NACK twice with two different messages, the
first one including only the error about the first resource, and the
second one including all three.
I suspect this same race condition would have been triggered eventually
by the EventEngine migration anyway; the current test basically depends
on the single-thread timing of the iomgr approach. So I'm addressing it
by replacing the e2e test with a unit test that covers the same cases
without the timing issue.
Rolls forward part of the dualstack changes, mostly from #33427 and a
little bit from #32692, both of which were reverted in #33718.
Specifically:
- For petiole policies, unconditionally start health watch on
subchannels, even if client side health checking is not enabled; in this
case, the health watch will report the subchannel's raw connectivity
state.
- Fix edge cases in health check reporting that occur when a watcher is
started before the initial state is reported.
- When client-side health checking fails, add the subchannel's address
to the RPC failure status message.
- Outlier detection now works only via the health checking watch, not
via the raw connectivity state watch.
- Remove now-unnecessary hack to ensure that outlier detection does not
work for pick_first.
A new metadata type `x-envoy-peer-metadata` is being introduced. We
don't have a better way to do this at the moment compared to just adding
it in `metadata_batch.h`.
The GSM Observability plugin uses this metadata to send topology
information to peers in the form of serialized and base64 encoded
`google::protobuf::Struct`. The individual keys being used inside the
struct are subject to change.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Based on updates at https://github.com/grpc/proposal/pull/380
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: Mark D. Roth <roth@google.com>
Co-authored-by: markdroth <markdroth@users.noreply.github.com>
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Matthew Stevenson