This adds the following new targets:
- `channel`: A virtual interface for a channel.
- `legacy_channel`: A channel implementation that supports the filter stack and call v2.
- `channel_create`: A standalone function to create a channel.
- `server_interface`: A base class with a few accessor methods used in surface/call.cc.
- `server`: The actual server implementation.
- `api_trace`, `call_tracer`, `server_call_tracer_filter`, `call_finalization`: These were split out of `grpc_base` to avoid various dependency problems.
- `compression`: This is a combination of the previously existing `compression_internal` target and the compression code that was part of `grpc_base`.
Closes#35924
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/35924 from markdroth:channel_interface 94a7fffddb
PiperOrigin-RevId: 612512438
Built upon @Vignesh2208 's work in #33156
This adds ref counting to the http_proxy fixture object, fixing test
flakes identified by the introduction of EventEngine listeners. Proxy
objects were either being deleted twice, or sometimes not at all,
resulting in two different sorts of flakes.
Why: Cleanup for chttp2_transport ahead of promise conversion - lots of
logic has become interleaved throughout chttp2, so some effort to
isolate logic out is warranted ahead of that conversion.
What: Split configuration and policy tracking for each of ping rate
throttling and abuse detection into their own modules. Add tests for
them.
Incidentally: Split channel args into their own header so that we can
split the policy stuff into separate build targets.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Add a new binary that runs all core end2end tests in fuzzing mode.
In this mode FuzzingEventEngine is substituted for the default event
engine. This means that time is simulated, as is IO. The FEE gets
control of callback delays also.
In our tests the `Step()` function becomes, instead of a single call to
`completion_queue_next`, a series of calls to that function and
`FuzzingEventEngine::Tick`, driving forward the event loop until
progress can be made.
PR guide:
---
**New binaries**
`core_end2end_test_fuzzer` - the new fuzzer itself
`seed_end2end_corpus` - a tool that produces an interesting seed corpus
**Config changes for safe fuzzing**
The implementation tries to use the config fuzzing work we've previously
deployed in api_fuzzer to fuzz across experiments. Since some
experiments are far too experimental to be safe in such fuzzing (and
this will always be the case):
- a new flag is added to experiments to opt-out of this fuzzing
- a new hook is added to the config system to allow variables to
re-write their inputs before setting them during the fuzz
**Event manager/IO changes**
Changes are made to the event engine shims so that tcp_server_posix can
run with a non-FD carrying EventEngine. These are in my mind a bit
clunky, but they work and they're in code that we expect to delete in
the medium term, so I think overall the approach is good.
**Changes to time**
A small tweak is made to fix a bug initializing time for fuzzers in
time.cc - we were previously failing to initialize
`g_process_epoch_cycles`
**Changes to `Crash`**
A version that prints to stdio is added so that we can reliably print a
crash from the fuzzer.
**Changes to CqVerifier**
Hooks are added to allow the top level loop to hook the verification
functions with a function that steps time between CQ polls.
**Changes to end2end fixtures**
State machinery moves from the fixture to the test infra, to keep the
customizations for fuzzing or not in one place. This means that fixtures
are now just client/server factories, which is overall nice.
It did necessitate moving some bespoke machinery into
h2_ssl_cert_test.cc - this file is beginning to be problematic in
borrowing parts but not all of the e2e test machinery. Some future PR
needs to solve this.
A cq arg is added to the Make functions since the cq is now owned by the
test and not the fixture.
**Changes to test registration**
`TEST_P` is replaced by `CORE_END2END_TEST` and our own test registry is
used as a first depot for test information.
The gtest version of these tests: queries that registry to manually
register tests with gtest. This ultimately changes the name of our tests
again (I think for the last time) - the new names are shorter and more
readable, so I don't count this as a regression.
The fuzzer version of these tests: constructs a database of fuzzable
tests that it can consult to look up a particular suite/test/config
combination specified by the fuzzer to fuzz against. This gives us a
single fuzzer that can test all 3k-ish fuzzing ready tests and cross
polinate configuration between them.
**Changes to test config**
The zero size registry stuff was causing some problems with the event
engine feature macros, so instead I've removed those and used GTEST_SKIP
in the problematic tests. I think that's the approach we move towards in
the future.
**Which tests are included**
Configs that are compatible - those that do not do fd manipulation
directly (these are incompatible with FuzzingEventEngine), and those
that do not join threads on their shutdown path (as these are
incompatible with our cq wait methodology). Each we can talk about in
the future - fd manipulation would be a significant expansion of
FuzzingEventEngine, and is probably not worth it, however many uses of
background threads now should probably evolve to be EventEngine::Run
calls in the future, and then would be trivially enabled in the fuzzers.
Some tests currently fail in the fuzzing environment, a
`SKIP_IF_FUZZING` macro is used for these few to disable them if in the
fuzzing environment. We'll burn these down in the future.
**Changes to fuzzing_event_engine**
Changes are made to time: an exponential sweep forward is used now -
this catches small time precision things early, but makes decade long
timers (we have them) able to be used right now. In the future we'll
just skip time forward to the next scheduled timer, but that approach
doesn't yet work due to legacy timer system interactions.
Changes to port assignment: we ensure that ports are legal numbers
before assigning them via `grpc_pick_port_or_die`.
A race condition between time checking and io is fixed.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Notes:
- `+trace` fixtures haven't run since 2016, so they're disabled for now
(7ad2d0b463 (diff-780fce7267c34170c1d0ea15cc9f65a7f4b79fefe955d185c44e8b3251cf9e38R76))
- all current fixtures define `FEATURE_MASK_SUPPORTS_AUTHORITY_HEADER`
and hence `authority_not_supported` has not been run in years - deleted
- bad_hostname similarly hasn't been triggered in a long while, so
deleted
- load_reporting_hook has never been enabled, so deleted
(f23fb4cf31/test/core/end2end/generate_tests.bzl (L145-L148))
- filter_latency & filter_status_code rely on global variables and so
don't convert particularly cleanly - and their value seems marginal, so
deleted
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This is a big rewrite of global config.
It does a few things, all somewhat intertwined:
1. centralize the list of configuration we have to a yaml file that can
be parsed, and code generated from it
2. add an initialization and a reset stage so that config vars can be
centrally accessed very quickly without the need for caching them
3. makes the syntax more C++ like (less macros!)
4. (optionally) adds absl flags to the OSS build
This first round of changes is intended to keep the system where it is
without major changes. We pick up absl flags to match internal code and
remove one point of deviation - but importantly continue to read from
the environment variables. In doing so we don't force absl flags on our
customers - it's possible to configure grpc without the flags - but
instead allow users that do use absl flags to configure grpc using that
mechanism. Importantly this lets internal customers configure grpc the
same everywhere.
Future changes along this path will be two-fold:
1. Move documentation generation into the code generation step, so that
within the source of truth yaml file we can find all documentation and
data about a configuration knob - eliminating the chance of forgetting
to document something in all the right places.
2. Provide fuzzing over configurations. Currently most config variables
get stashed in static constants across the codebase. To fuzz over these
we'd need a way to reset those cached values between fuzzing rounds,
something that is terrifically difficult right now, but with these
changes should simply be a reset on `ConfigVars`.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
There were some rollback conflicts, so this isn't a pure rollback.
This reverts commit ba0e55f539.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Rollforward #32346 with some fixes in
1e88193edd
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
To be merged after #31448#32110#32094
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
* Reland x2: Make GetDefaultEventEngine return a shared_ptr
* remove thread leak from NativeDNSResolver
This is not going to work for resolvers that support cancellation.
* give resolvers bounded lifetimes
Some resolver own EventEngines. EventEngines cannot run off the end of
the process since they have unjoined threads (problematic in a small set
of environments). This gives resolvers bounded lifetimes, and allows
replacement of resolvers without ASAN issues of deleting resolvers in
active use (occurs in tests).
* fix
* fix windows
* fix surface init test
* fix
* sanitize
* use after move
* the test must wait for the callback to be destroyed
* windows fix: delete the resolver on iomgr shutdown, not before
* Make TimerManager threads non-joinable
On gRPC shutdown, any unjoined TimerManager threads will cause TSAN to
detect thread leaks. This fix resolves issues I saw in end2end test
shutdown in another PR, where a single timer manager thread was always
alive after the test ended.
The long-term solution is to integrate the new ThreadPool here, but this
unblocks me for now.
* backport fix
* fix
* shared_ptr<EventEngine> in EventEngine benchmarks
Mark D. Roth