commit 3b23a32a63219f51a5298bc55a65ecee866e79d0 upstream.
dev_ifsioc_locked() is called with only RCU read lock, so when
there is a parallel writer changing the mac address, it could
get a partially updated mac address, as shown below:
Thread 1 Thread 2
// eth_commit_mac_addr_change()
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
// dev_ifsioc_locked()
memcpy(ifr->ifr_hwaddr.sa_data,
dev->dev_addr,...);
Close this race condition by guarding them with a RW semaphore,
like netdev_get_name(). We can not use seqlock here as it does not
allow blocking. The writers already take RTNL anyway, so this does
not affect the slow path. To avoid bothering existing
dev_set_mac_address() callers in drivers, introduce a new wrapper
just for user-facing callers on ioctl and rtnetlink paths.
Note, bonding also changes slave mac addresses but that requires
a separate patch due to the complexity of bonding code.
Fixes: 3710becf8a58 ("net: RCU locking for simple ioctl()")
Reported-by: "Gong, Sishuai" <sishuai@purdue.edu>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8dc1c444df193701910f5e80b5d4caaf705a8fb0 upstream.
Commit c80794323e82 ("net: Fix packet reordering caused by GRO and
listified RX cooperation") had the unfortunate effect of adding
latencies in common workloads.
Before the patch, GRO packets were immediately passed to
upper stacks.
After the patch, we can accumulate quite a lot of GRO
packets (depdending on NAPI budget).
My fix is counting in napi->rx_count number of segments
instead of number of logical packets.
Fixes: c80794323e82 ("net: Fix packet reordering caused by GRO and listified RX cooperation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Bisected-by: John Sperbeck <jsperbeck@google.com>
Tested-by: Jian Yang <jianyang@google.com>
Cc: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Alexander Lobakin <alobakin@pm.me>
Link: https://lore.kernel.org/r/20210204213146.4192368-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the virtualization scenario, you can use pvipi to optimize the sending of
IPI interrupts and reduce the number of vmexit.
rps_using_pvipi test
Test guest: 32 core, 64G memory, virtio-net 8 queues, rss interrupt is bound
to 24-31 core. Observe the number of vmexit of 31 cores.
1. 1000000pps
100 iperf instances, 10000pps per instance.
disable rps_using_pvipi 68077 vmexit/s
enable rps_using_pvipi 21138 vmexit/s
2. 2000000pps
1000 iperf instances, 2000pps per instance.
disable rps_using_pvipi 40879 vmexit/s
enable rps_using_pvipi 9195 vmexit/s
3. 2000000pps
2000 iperf instances, 1000pps per instance.
disable rps_using_pvipi 24746 vmexit/s
enable rps_using_pvipi 7292 vmexit/s
Enabling rps_using_pvipi can greatly reduce the number of vmexit.
Signed-off-by: yongduan <yongduan@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
In the virtualization scenario, you can use pvipi to optimize the sending of
IPI interrupts and reduce the number of vmexit.
rps_using_pvipi test
Test guest: 32 core, 64G memory, virtio-net 8 queues, rss interrupt is bound
to 24-31 core. Observe the number of vmexit of 31 cores.
1. 1000000pps
100 iperf instances, 10000pps per instance.
disable rps_using_pvipi 68077 vmexit/s
enable rps_using_pvipi 21138 vmexit/s
2. 2000000pps
1000 iperf instances, 2000pps per instance.
disable rps_using_pvipi 40879 vmexit/s
enable rps_using_pvipi 9195 vmexit/s
3. 2000000pps
2000 iperf instances, 1000pps per instance.
disable rps_using_pvipi 24746 vmexit/s
enable rps_using_pvipi 7292 vmexit/s
Enabling rps_using_pvipi can greatly reduce the number of vmexit.
Signed-off-by: yongduan <yongduan@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
[ Upstream commit e1b9efe6baebe79019a2183176686a0e709388ae ]
When a netdev is enslaved to a bridge, its parent identifier is queried.
This is done so that packets that were already forwarded in hardware
will not be forwarded again by the bridge device between netdevs
belonging to the same hardware instance.
The operation fails when the netdev is an upper of netdevs with
different parent identifiers.
Instead of failing the enslavement, have dev_get_port_parent_id() return
'-EOPNOTSUPP' which will signal the bridge to skip the query operation.
Other callers of the function are not affected by this change.
Fixes: 7e1146e8c10c ("net: devlink: introduce devlink_compat_switch_id_get() helper")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 96e97bc07e90f175a8980a22827faf702ca4cb30 ]
napi_disable() makes sure to set the NAPI_STATE_NPSVC bit to prevent
netpoll from accessing rings before init is complete. However, the
same is not done for fresh napi instances in netif_napi_add(),
even though we expect NAPI instances to be added as disabled.
This causes crashes during driver reconfiguration (enabling XDP,
changing the channel count) - if there is any printk() after
netif_napi_add() but before napi_enable().
To ensure memory ordering is correct we need to use RCU accessors.
Reported-by: Rob Sherwood <rsher@fb.com>
Fixes: 2d8bff12699a ("netpoll: Close race condition between poll_one_napi and napi_disable")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6570bc79c0dfff0f228b7afd2de720fb4e84d61d upstream.
Commit 323ebb61e32b4 ("net: use listified RX for handling GRO_NORMAL
skbs") made use of listified skb processing for the users of
napi_gro_frags().
The same technique can be used in a way more common napi_gro_receive()
to speed up non-merged (GRO_NORMAL) skbs for a wide range of drivers
including gro_cells and mac80211 users.
This slightly changes the return value in cases where skb is being
dropped by the core stack, but it seems to have no impact on related
drivers' functionality.
gro_normal_batch is left untouched as it's very individual for every
single system configuration and might be tuned in manual order to
achieve an optimal performance.
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Hyunsoon Kim <h10.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7df5cb75cfb8acf96c7f2342530eb41e0c11f4c3 ]
IRQs are disabled when freeing skbs in input queue.
Use the IRQ safe variant to free skbs here.
Fixes: 145dd5f9c88f ("net: flush the softnet backlog in process context")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 11d6011c2cf29f7c8181ebde6c8bc0c4d83adcd7 ]
Sequence counters write paths are critical sections that must never be
preempted, and blocking, even for CONFIG_PREEMPTION=n, is not allowed.
Commit 5dbe7c178d3f ("net: fix kernel deadlock with interface rename and
netdev name retrieval.") handled a deadlock, observed with
CONFIG_PREEMPTION=n, where the devnet_rename seqcount read side was
infinitely spinning: it got scheduled after the seqcount write side
blocked inside its own critical section.
To fix that deadlock, among other issues, the commit added a
cond_resched() inside the read side section. While this will get the
non-preemptible kernel eventually unstuck, the seqcount reader is fully
exhausting its slice just spinning -- until TIF_NEED_RESCHED is set.
The fix is also still broken: if the seqcount reader belongs to a
real-time scheduling policy, it can spin forever and the kernel will
livelock.
Disabling preemption over the seqcount write side critical section will
not work: inside it are a number of GFP_KERNEL allocations and mutex
locking through the drivers/base/ :: device_rename() call chain.
>From all the above, replace the seqcount with a rwsem.
Fixes: 5dbe7c178d3f (net: fix kernel deadlock with interface rename and netdev name retrieval.)
Fixes: 30e6c9fa93cf (net: devnet_rename_seq should be a seqcount)
Fixes: c91f6df2db49 (sockopt: Change getsockopt() of SO_BINDTODEVICE to return an interface name)
Cc: <stable@vger.kernel.org>
Reported-by: kbuild test robot <lkp@intel.com> [ v1 missing up_read() on error exit ]
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [ v1 missing up_read() on error exit ]
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2da2b32fd9346009e9acdb68c570ca8d3966aba7 ]
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.
Update the comment to use CONFIG_PREEMPTION.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20191015191821.11479-22-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0bbbdc32febd4f034ecbf3ea17865785b2c0652 ]
__netif_receive_skb_core may change the skb pointer passed into it (e.g.
in rx_handler). The original skb may be freed as a result of this
operation.
The callers of __netif_receive_skb_core may further process original skb
by using pt_prev pointer returned by __netif_receive_skb_core thus
leading to unpleasant effects.
The solution is to pass skb by reference into __netif_receive_skb_core.
v2: Added Fixes tag and comment regarding ppt_prev and skb invariant.
Fixes: 88eb1944e18c ("net: core: propagate SKB lists through packet_type lookup")
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dd912306ff008891c82cd9f63e8181e47a9cb2fb ]
syzbot managed to trigger a recursive NETDEV_FEAT_CHANGE event
between bonding master and slave. I managed to find a reproducer
for this:
ip li set bond0 up
ifenslave bond0 eth0
brctl addbr br0
ethtool -K eth0 lro off
brctl addif br0 bond0
ip li set br0 up
When a NETDEV_FEAT_CHANGE event is triggered on a bonding slave,
it captures this and calls bond_compute_features() to fixup its
master's and other slaves' features. However, when syncing with
its lower devices by netdev_sync_lower_features() this event is
triggered again on slaves when the LRO feature fails to change,
so it goes back and forth recursively until the kernel stack is
exhausted.
Commit 17b85d29e82c intentionally lets __netdev_update_features()
return -1 for such a failure case, so we have to just rely on
the existing check inside netdev_sync_lower_features() and skip
NETDEV_FEAT_CHANGE event only for this specific failure case.
Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack")
Reported-by: syzbot+e73ceacfd8560cc8a3ca@syzkaller.appspotmail.com
Reported-by: syzbot+c2fb6f9ddcea95ba49b5@syzkaller.appspotmail.com
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jann Horn <jannh@google.com>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a4837980fd9fa4c70a821d11831698901baef56b ]
For HZ < 1000 timeout 2000us rounds up to 1 jiffy but expires randomly
because next timer interrupt could come shortly after starting softirq.
For commonly used CONFIG_HZ=1000 nothing changes.
Fixes: 7acf8a1e8a28 ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning")
Reported-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang