[ Upstream commit fe204591cc9480347af7d2d6029b24a62e449486 ]
Building a kernel with clang sometimes fails with an objtool error in dlm:
fs/dlm/lock.o: warning: objtool: revert_lock_pc()+0xbd: can't find jump dest instruction at .text+0xd7fc
The problem is that BUG() never returns and the compiler knows
that anything after it is unreachable, however the panic still
emits some code that does not get fully eliminated.
Having both BUG() and panic() is really pointless as the BUG()
kills the current process and the subsequent panic() never hits.
In most cases, we probably don't really want either and should
replace the DLM_ASSERT() statements with WARN_ON(), as has
been done for some of them.
Remove the BUG() here so the user at least sees the panic message
and we can reliably build randconfig kernels.
Fixes: e7fd41792fc0 ("[DLM] The core of the DLM for GFS2/CLVM")
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb737bbe48bea9854455cb61ea1dc06e92ce586c ]
In virtiofs (unlike in regular fuse) processing of async replies is
serialized. This can result in a deadlock in rare corner cases when
there's a circular dependency between the completion of two or more async
replies.
Such a deadlock can be reproduced with xfstests:generic/503 if TEST_DIR ==
SCRATCH_MNT (which is a misconfiguration):
- Process A is waiting for page lock in worker thread context and blocked
(virtio_fs_requests_done_work()).
- Process B is holding page lock and waiting for pending writes to
finish (fuse_wait_on_page_writeback()).
- Write requests are waiting in virtqueue and can't complete because
worker thread is blocked on page lock (process A).
Fix this by creating a unique work_struct for each async reply that can
block (O_DIRECT read).
Fixes: a62a8ef9d97d ("virtio-fs: add virtiofs filesystem")
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8626441f05dc45a2f4693ee6863d02456ce39e60 ]
If mountpoint is readonly, we should allow shutdowning filesystem
successfully, this fixes issue found by generic/599 testcase of
xfstest.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaa3aef34d3ab9499a5c7633823429f7a24e6dff ]
If we mount a very specific DFS link
\\FS0.FOO.COM\dfs\link -> \FS0\share1, \FS1\share2
where its target list contains NB names ("FS0" & "FS1") rather than
FQDN ones ("FS0.FOO.COM" & "FS1.FOO.COM"), we end up connecting to
\FOO\share1 but server->hostname will have "FOO.COM". The reason is
because both "FS0" and "FS0.FOO.COM" resolve to same IP address and
they share same TCP server connection, but "FS0.FOO.COM" was the first
hostname set -- which is OK.
However, if the echo thread timeouts and we still have a good
connection to "FS0", in cifs_reconnect()
rc = generic_ip_connect(server) -> success
if (rc) {
...
reconn_inval_dfs_target(server, cifs_sb, &tgt_list,
&tgt_it);
...
}
...
it successfully reconnects to "FS0" server but does not set up next
DFS target - which should be the same target server "\FS0\share1" -
and server->hostname remains set to "FS0.FOO.COM" rather than "FS0",
as reconn_inval_dfs_target() would have it set to "FS0" if called
earlier.
Finally, in __smb2_reconnect(), the reconnect of tcons would fail
because tcon->ses->server->hostname (FS0.FOO.COM) does not match DFS
target's hostname (FS0).
Fix that by calling reconn_inval_dfs_target() before
generic_ip_connect() so server->hostname will get updated correctly
prior to reconnecting its tcons in __smb2_reconnect().
With "cifs: handle hostnames that resolve to same ip in failover"
patch
- The above problem would not occur.
- We could save an DNS query to find out that they both resolve to
the same ip address.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4abc6b12eb1f7a533c2e7484cfa555454ff0977 ]
nfsd4_process_cb_update() invokes svc_xprt_get(), which increases the
refcount of the "c->cn_xprt".
The reference counting issue happens in one exception handling path of
nfsd4_process_cb_update(). When setup callback client failed, the
function forgets to decrease the refcnt increased by svc_xprt_get(),
causing a refcnt leak.
Fix this issue by calling svc_xprt_put() when setup callback client
failed.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit baaa7ebf25c78c5cb712fac16b7f549100beddd3 ]
This reserved space isn't committed yet but cannot be used for
allocations. For userspace it has no difference from used space.
See the same fix in ext4 commit f06925c73942 ("ext4: report delalloc
reserve as non-free in statfs for project quota").
Fixes: ddc34e328d06 ("f2fs: introduce f2fs_statfs_project")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1ae18f71cb522684bac1718f5c188fb5e30eb23d upstream.
When parsing the mount option, we don't have sbi->user_block_count.
Should do it after getting it.
Cc: <stable@vger.kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08adf452e628b0e2ce9a01048cfbec52353703d7 upstream.
'igrab(d_inode(dentry->d_parent))' without holding dentry->d_lock is
broken because without d_lock, d_parent can be concurrently changed due
to a rename(). Then if the old directory is immediately deleted, old
d_parent->inode can be NULL. That causes a NULL dereference in igrab().
To fix this, use dget_parent() to safely grab a reference to the parent
dentry, which pins the inode. This also eliminates the need to use
d_find_any_alias() other than for the initial inode, as we no longer
throw away the dentry at each step.
This is an extremely hard race to hit, but it is possible. Adding a
udelay() in between the reads of ->d_parent and its ->d_inode makes it
reproducible on a no-journal filesystem using the following program:
#include <fcntl.h>
#include <unistd.h>
int main()
{
if (fork()) {
for (;;) {
mkdir("dir1", 0700);
int fd = open("dir1/file", O_RDWR|O_CREAT|O_SYNC);
write(fd, "X", 1);
close(fd);
}
} else {
mkdir("dir2", 0700);
for (;;) {
rename("dir1/file", "dir2/file");
rmdir("dir1");
}
}
}
Fixes: d59729f4e794 ("ext4: fix races in ext4_sync_parent()")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20200506183140.541194-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c36a71b4e35ab35340facdd6964a00956b9fef0a upstream.
If eh->eh_max is 0, EXT_MAX_EXTENT/INDEX would evaluate to unsigned
(-1) resulting in illegal memory accesses. Although there is no
consistent repro, we see that generic/019 sometimes crashes because of
this bug.
Ran gce-xfstests smoke and verified that there were no regressions.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20200421023959.20879-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2166e5edce9ac1edf3b113d6091ef72fcac2d6c4 upstream.
We always preallocate a data extent for writing a free space cache, which
causes writeback to always try the nocow path first, since the free space
inode has the prealloc bit set in its flags.
However if the block group that contains the data extent for the space
cache has been turned to RO mode due to a running scrub or balance for
example, we have to fallback to the cow path. In that case once a new data
extent is allocated we end up calling btrfs_add_reserved_bytes(), which
decrements the counter named bytes_may_use from the data space_info object
with the expection that this counter was previously incremented with the
same amount (the size of the data extent).
However when we started writeout of the space cache at cache_save_setup(),
we incremented the value of the bytes_may_use counter through a call to
btrfs_check_data_free_space() and then decremented it through a call to
btrfs_prealloc_file_range_trans() immediately after. So when starting the
writeback if we fallback to cow mode we have to increment the counter
bytes_may_use of the data space_info again to compensate for the extent
allocation done by the cow path.
When this issue happens we are incorrectly decrementing the bytes_may_use
counter and when its current value is smaller then the amount we try to
subtract we end up with the following warning:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 657 at fs/btrfs/space-info.h:115 btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs]
Modules linked in: btrfs blake2b_generic xor raid6_pq libcrc32c (...)
CPU: 3 PID: 657 Comm: kworker/u8:7 Tainted: G W 5.6.0-rc7-btrfs-next-58 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Workqueue: writeback wb_workfn (flush-btrfs-1591)
RIP: 0010:btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs]
Code: ff ff 48 (...)
RSP: 0000:ffffa41608f13660 EFLAGS: 00010287
RAX: 0000000000001000 RBX: ffff9615b93ae400 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff9615b96ab410
RBP: fffffffffffee000 R08: 0000000000000001 R09: 0000000000000000
R10: ffff961585e62a40 R11: 0000000000000000 R12: ffff9615b96ab400
R13: ffff9615a1a2a000 R14: 0000000000012000 R15: ffff9615b93ae400
FS: 0000000000000000(0000) GS:ffff9615bb200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055cbbc2ae178 CR3: 0000000115794006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
find_free_extent+0x4a0/0x16c0 [btrfs]
btrfs_reserve_extent+0x91/0x180 [btrfs]
cow_file_range+0x12d/0x490 [btrfs]
btrfs_run_delalloc_range+0x9f/0x6d0 [btrfs]
? find_lock_delalloc_range+0x221/0x250 [btrfs]
writepage_delalloc+0xe8/0x150 [btrfs]
__extent_writepage+0xe8/0x4c0 [btrfs]
extent_write_cache_pages+0x237/0x530 [btrfs]
extent_writepages+0x44/0xa0 [btrfs]
do_writepages+0x23/0x80
__writeback_single_inode+0x59/0x700
writeback_sb_inodes+0x267/0x5f0
__writeback_inodes_wb+0x87/0xe0
wb_writeback+0x382/0x590
? wb_workfn+0x4a2/0x6c0
wb_workfn+0x4a2/0x6c0
process_one_work+0x26d/0x6a0
worker_thread+0x4f/0x3e0
? process_one_work+0x6a0/0x6a0
kthread+0x103/0x140
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x3a/0x50
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffffffffb2abdedf>] copy_process+0x74f/0x2020
softirqs last enabled at (0): [<ffffffffb2abdedf>] copy_process+0x74f/0x2020
softirqs last disabled at (0): [<0000000000000000>] 0x0
---[ end trace bd7c03622e0b0a52 ]---
------------[ cut here ]------------
So fix this by incrementing the bytes_may_use counter of the data
space_info when we fallback to the cow path. If the cow path is successful
the counter is decremented after extent allocation (by
btrfs_add_reserved_bytes()), if it fails it ends up being decremented as
well when clearing the delalloc range (extent_clear_unlock_delalloc()).
This could be triggered sporadically by the test case btrfs/061 from
fstests.
Fixes: 82d5902d9c681b ("Btrfs: Support reading/writing on disk free ino cache")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 467dc47ea99c56e966e99d09dae54869850abeeb upstream.
When doing a buffered write we always try to reserve data space for it,
even when the file has the NOCOW bit set or the write falls into a file
range covered by a prealloc extent. This is done both because it is
expensive to check if we can do a nocow write (checking if an extent is
shared through reflinks or if there's a hole in the range for example),
and because when writeback starts we might actually need to fallback to
COW mode (for example the block group containing the target extents was
turned into RO mode due to a scrub or balance).
When we are unable to reserve data space we check if we can do a nocow
write, and if we can, we proceed with dirtying the pages and setting up
the range for delalloc. In this case the bytes_may_use counter of the
data space_info object is not incremented, unlike in the case where we
are able to reserve data space (done through btrfs_check_data_free_space()
which calls btrfs_alloc_data_chunk_ondemand()).
Later when running delalloc we attempt to start writeback in nocow mode
but we might revert back to cow mode, for example because in the meanwhile
a block group was turned into RO mode by a scrub or relocation. The cow
path after successfully allocating an extent ends up calling
btrfs_add_reserved_bytes(), which expects the bytes_may_use counter of
the data space_info object to have been incremented before - but we did
not do it when the buffered write started, since there was not enough
available data space. So btrfs_add_reserved_bytes() ends up decrementing
the bytes_may_use counter anyway, and when the counter's current value
is smaller then the size of the allocated extent we get a stack trace
like the following:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 20138 at fs/btrfs/space-info.h:115 btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs]
Modules linked in: btrfs blake2b_generic xor raid6_pq libcrc32c (...)
CPU: 0 PID: 20138 Comm: kworker/u8:15 Not tainted 5.6.0-rc7-btrfs-next-58 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Workqueue: writeback wb_workfn (flush-btrfs-1754)
RIP: 0010:btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs]
Code: ff ff 48 (...)
RSP: 0018:ffffbda18a4b3568 EFLAGS: 00010287
RAX: 0000000000000000 RBX: ffff9ca076f5d800 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff9ca068470410
RBP: fffffffffffff000 R08: 0000000000000001 R09: 0000000000000000
R10: ffff9ca079d58040 R11: 0000000000000000 R12: ffff9ca068470400
R13: ffff9ca0408b2000 R14: 0000000000001000 R15: ffff9ca076f5d800
FS: 0000000000000000(0000) GS:ffff9ca07a600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005605dbfe7048 CR3: 0000000138570006 CR4: 00000000003606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
find_free_extent+0x4a0/0x16c0 [btrfs]
btrfs_reserve_extent+0x91/0x180 [btrfs]
cow_file_range+0x12d/0x490 [btrfs]
run_delalloc_nocow+0x341/0xa40 [btrfs]
btrfs_run_delalloc_range+0x1ea/0x6d0 [btrfs]
? find_lock_delalloc_range+0x221/0x250 [btrfs]
writepage_delalloc+0xe8/0x150 [btrfs]
__extent_writepage+0xe8/0x4c0 [btrfs]
extent_write_cache_pages+0x237/0x530 [btrfs]
? btrfs_wq_submit_bio+0x9f/0xc0 [btrfs]
extent_writepages+0x44/0xa0 [btrfs]
do_writepages+0x23/0x80
__writeback_single_inode+0x59/0x700
writeback_sb_inodes+0x267/0x5f0
__writeback_inodes_wb+0x87/0xe0
wb_writeback+0x382/0x590
? wb_workfn+0x4a2/0x6c0
wb_workfn+0x4a2/0x6c0
process_one_work+0x26d/0x6a0
worker_thread+0x4f/0x3e0
? process_one_work+0x6a0/0x6a0
kthread+0x103/0x140
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x3a/0x50
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffffffff94ebdedf>] copy_process+0x74f/0x2020
softirqs last enabled at (0): [<ffffffff94ebdedf>] copy_process+0x74f/0x2020
softirqs last disabled at (0): [<0000000000000000>] 0x0
---[ end trace f9f6ef8ec4cd8ec9 ]---
So to fix this, when falling back into cow mode check if space was not
reserved, by testing for the bit EXTENT_NORESERVE in the respective file
range, and if not, increment the bytes_may_use counter for the data
space_info object. Also clear the EXTENT_NORESERVE bit from the range, so
that if the cow path fails it decrements the bytes_may_use counter when
clearing the delalloc range (through the btrfs_clear_delalloc_extent()
callback).
Fixes: 7ee9e4405f264e ("Btrfs: check if we can nocow if we don't have data space")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2c8e92d1140754073ad3799eb6620c76bab2078 upstream.
If an error happens while running dellaloc in COW mode for a range, we can
end up calling extent_clear_unlock_delalloc() for a range that goes beyond
our range's end offset by 1 byte, which affects 1 extra page. This results
in clearing bits and doing page operations (such as a page unlock) outside
our target range.
Fix that by calling extent_clear_unlock_delalloc() with an inclusive end
offset, instead of an exclusive end offset, at cow_file_range().
Fixes: a315e68f6e8b30 ("Btrfs: fix invalid attempt to free reserved space on failure to cow range")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d3113a193e3385c72240096fe397618ecab6e43 upstream.
In btrfs_submit_direct_hook(), if a direct I/O write doesn't span a RAID
stripe or chunk, we submit orig_bio without cloning it. In this case, we
don't increment pending_bios. Then, if btrfs_submit_dio_bio() fails, we
decrement pending_bios to -1, and we never complete orig_bio. Fix it by
initializing pending_bios to 1 instead of incrementing later.
Fixing this exposes another bug: we put orig_bio prematurely and then
put it again from end_io. Fix it by not putting orig_bio.
After this change, pending_bios is really more of a reference count, but
I'll leave that cleanup separate to keep the fix small.
Fixes: e65e15355429 ("btrfs: fix panic caused by direct IO")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c343784c4328781129bcf9e671645f69fe4b38a upstream.
Nikolay noticed a bunch of test failures with my global rsv steal
patches. At first he thought they were introduced by them, but they've
been failing for a while with 64k nodes.
The problem is with 64k nodes we have a global reserve that calculates
out to 13MiB on a freshly made file system, which only has 8MiB of
metadata space. Because of changes I previously made we no longer
account for the global reserve in the overcommit logic, which means we
correctly allow overcommit to happen even though we are already
overcommitted.
However in some corner cases, for example btrfs/170, we will allocate
the entire file system up with data chunks before we have enough space
pressure to allocate a metadata chunk. Then once the fs is full we
ENOSPC out because we cannot overcommit and the global reserve is taking
up all of the available space.
The most ideal way to deal with this is to change our space reservation
stuff to take into account the height of the tree's that we're
modifying, so that our global reserve calculation does not end up so
obscenely large.
However that is a huge undertaking. Instead fix this by forcing a chunk
allocation if the global reserve is larger than the total metadata
space. This gives us essentially the same behavior that happened
before, we get a chunk allocated and these tests can pass.
This is meant to be a stop-gap measure until we can tackle the "tree
height only" project.
Fixes: 0096420adb03 ("btrfs: do not account global reserve in can_overcommit")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89efda52e6b6930f80f5adda9c3c9edfb1397191 upstream.
Whenever a chown is executed, all capabilities of the file being touched
are lost. When doing incremental send with a file with capabilities,
there is a situation where the capability can be lost on the receiving
side. The sequence of actions bellow shows the problem:
$ mount /dev/sda fs1
$ mount /dev/sdb fs2
$ touch fs1/foo.bar
$ setcap cap_sys_nice+ep fs1/foo.bar
$ btrfs subvolume snapshot -r fs1 fs1/snap_init
$ btrfs send fs1/snap_init | btrfs receive fs2
$ chgrp adm fs1/foo.bar
$ setcap cap_sys_nice+ep fs1/foo.bar
$ btrfs subvolume snapshot -r fs1 fs1/snap_complete
$ btrfs subvolume snapshot -r fs1 fs1/snap_incremental
$ btrfs send fs1/snap_complete | btrfs receive fs2
$ btrfs send -p fs1/snap_init fs1/snap_incremental | btrfs receive fs2
At this point, only a chown was emitted by "btrfs send" since only the
group was changed. This makes the cap_sys_nice capability to be dropped
from fs2/snap_incremental/foo.bar
To fix that, only emit capabilities after chown is emitted. The current
code first checks for xattrs that are new/changed, emits them, and later
emit the chown. Now, __process_new_xattr skips capabilities, letting
only finish_inode_if_needed to emit them, if they exist, for the inode
being processed.
This behavior was being worked around in "btrfs receive" side by caching
the capability and only applying it after chown. Now, xattrs are only
emmited _after_ chown, making that workaround not needed anymore.
Link: https://github.com/kdave/btrfs-progs/issues/202
CC: stable@vger.kernel.org # 4.4+
Suggested-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 998a0671961f66e9fad4990ed75f80ba3088c2f1 upstream.
btrfs_free_extra_devids() updates fs_devices::latest_bdev to point to
the bdev with greatest device::generation number. For a typical-missing
device the generation number is zero so fs_devices::latest_bdev will
never point to it.
But if the missing device is due to alienation [1], then
device::generation is not zero and if it is greater or equal to the rest
of device generations in the list, then fs_devices::latest_bdev ends up
pointing to the missing device and reports the error like [2].
[1] We maintain devices of a fsid (as in fs_device::fsid) in the
fs_devices::devices list, a device is considered as an alien device
if its fsid does not match with the fs_device::fsid
Consider a working filesystem with raid1:
$ mkfs.btrfs -f -d raid1 -m raid1 /dev/sda /dev/sdb
$ mount /dev/sda /mnt-raid1
$ umount /mnt-raid1
While mnt-raid1 was unmounted the user force-adds one of its devices to
another btrfs filesystem:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt-single
$ btrfs dev add -f /dev/sda /mnt-single
Now the original mnt-raid1 fails to mount in degraded mode, because
fs_devices::latest_bdev is pointing to the alien device.
$ mount -o degraded /dev/sdb /mnt-raid1
[2]
mount: wrong fs type, bad option, bad superblock on /dev/sdb,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
kernel: BTRFS warning (device sdb): devid 1 uuid 072a0192-675b-4d5a-8640-a5cf2b2c704d is missing
kernel: BTRFS error (device sdb): failed to read devices
kernel: BTRFS error (device sdb): open_ctree failed
Fix the root cause by checking if the device is not missing before it
can be considered for the fs_devices::latest_bdev.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f551d969037cc128eca60688d9c5a300d84e665 upstream.
When an old device has new fsid through 'btrfs device add -f <dev>' our
fs_devices list has an alien device in one of the fs_devices lists.
By having an alien device in fs_devices, we have two issues so far
1. missing device does not not show as missing in the userland
2. degraded mount will fail
Both issues are caused by the fact that there's an alien device in the
fs_devices list. (Alien means that it does not belong to the filesystem,
identified by fsid, or does not contain btrfs filesystem at all, eg. due
to overwrite).
A device can be scanned/added through the control device ioctls
SCAN_DEV, DEVICES_READY or by ADD_DEV.
And device coming through the control device is checked against the all
other devices in the lists, but this was not the case for ADD_DEV.
This patch fixes both issues above by removing the alien device.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cbab8ade585a18c4334b085564d9d046e01a3f70 ]
[BUG]
For the following operation, qgroup is guaranteed to be screwed up due
to snapshot adding to a new qgroup:
# mkfs.btrfs -f $dev
# mount $dev $mnt
# btrfs qgroup en $mnt
# btrfs subv create $mnt/src
# xfs_io -f -c "pwrite 0 1m" $mnt/src/file
# sync
# btrfs qgroup create 1/0 $mnt/src
# btrfs subv snapshot -i 1/0 $mnt/src $mnt/snapshot
# btrfs qgroup show -prce $mnt/src
qgroupid rfer excl max_rfer max_excl parent child
-------- ---- ---- -------- -------- ------ -----
0/5 16.00KiB 16.00KiB none none --- ---
0/257 1.02MiB 16.00KiB none none --- ---
0/258 1.02MiB 16.00KiB none none 1/0 ---
1/0 0.00B 0.00B none none --- 0/258
^^^^^^^^^^^^^^^^^^^^
[CAUSE]
The problem is in btrfs_qgroup_inherit(), we don't have good enough
check to determine if the new relation would break the existing
accounting.
Unlike btrfs_add_qgroup_relation(), which has proper check to determine
if we can do quick update without a rescan, in btrfs_qgroup_inherit() we
can even assign a snapshot to multiple qgroups.
[FIX]
Fix it by manually marking qgroup inconsistent for snapshot inheritance.
For subvolume creation, since all its extents are exclusively owned, we
don't need to rescan.
In theory, we should call relation check like quick_update_accounting()
when doing qgroup inheritance and inform user about qgroup accounting
inconsistency.
But we don't have good mechanism to relay that back to the user in the
snapshot creation context, thus we can only silently mark the qgroup
inconsistent.
Anyway, user shouldn't use qgroup inheritance during snapshot creation,
and should add qgroup relationship after snapshot creation by 'btrfs
qgroup assign', which has a much better UI to inform user about qgroup
inconsistent and kick in rescan automatically.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f9fe614407692f670601a634621138233ac00d7 ]
For unlink transactions and block group removal
btrfs_start_transaction_fallback_global_rsv will first try to start an
ordinary transaction and if it fails it will fall back to reserving the
required amount by stealing from the global reserve. This is problematic
because of all the same reasons we had with previous iterations of the
ENOSPC handling, thundering herd. We get a bunch of failures all at
once, everybody tries to allocate from the global reserve, some win and
some lose, we get an ENSOPC.
Fix this behavior by introducing BTRFS_RESERVE_FLUSH_ALL_STEAL. It's
used to mark unlink reservation. To fix this we need to integrate this
logic into the normal ENOSPC infrastructure. We still go through all of
the normal flushing work, and at the moment we begin to fail all the
tickets we try to satisfy any tickets that are allowed to steal by
stealing from the global reserve. If this works we start the flushing
system over again just like we would with a normal ticket satisfaction.
This serializes our global reserve stealing, so we don't have the
thundering herd problem.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 629dcb38dc351947ed6a26a997d4b587f3bd5c7e ]
The pre-flush dquot verification in xfs_qm_dqflush() duplicates the
read verifier by checking the dquot in the on-disk buffer. Instead,
verify the in-core variant before it is flushed to the buffer.
Fixes: 7224fa482a6d ("xfs: add full xfs_dqblk verifier")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6983e80b03bd4fd42de71993b3ac7403edac758 ]
The buffer write failure flag is intended to control the internal
write retry that XFS has historically implemented to help mitigate
the severity of transient I/O errors. The flag is set when a buffer
is resubmitted from the I/O completion path due to a previous
failure. It is checked on subsequent I/O completions to skip the
internal retry and fall through to the higher level configurable
error handling mechanism. The flag is cleared in the synchronous and
delwri submission paths and also checked in various places to log
write failure messages.
There are a couple minor problems with the current usage of this
flag. One is that we issue an internal retry after every submission
from xfsaild due to how delwri submission clears the flag. This
results in double the expected or configured number of write
attempts when under sustained failures. Another more subtle issue is
that the flag is never cleared on successful I/O completion. This
can cause xfs_wait_buftarg() to suggest that dirty buffers are being
thrown away due to the existence of the flag, when the reality is
that the flag might still be set because the write succeeded on the
retry.
Clear the write failure flag on successful I/O completion to address
both of these problems. This means that the internal retry attempt
occurs once since the last time a buffer write failed and that
various other contexts only see the flag set when the immediately
previous write attempt has failed.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bc3b5e4b70d28f8edcafc3c9e4de515998eea9e ]
Make sure we release resources properly if we cannot clean out the COW
extents in preparation for an extent swap.
Fixes: 96987eea537d6c ("xfs: cancel COW blocks before swapext")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e4a3f7ed5d54926ec671bbb13e171cfe179cc50 ]
We are currently treating any non-zero return value from btrfs_next_leaf()
the same way, by going to the code that inserts a new checksum item in the
tree. However if btrfs_next_leaf() returns an error (a value < 0), we
should just stop and return the error, and not behave as if nothing has
happened, since in that case we do not have a way to know if there is a
next leaf or we are currently at the last leaf already.
So fix that by returning the error from btrfs_next_leaf().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb4f58a747f0421b10645fbf75a6acc88da0de50 ]
On ppc64le with 64k page size (respectively 64k block size) generic/320
was failing and debug output showed we were getting a premature ENOSPC
with a bunch of space in btrfs_fs_info::trans_block_rsv.
This meant there were still open transaction handles holding space, yet
the flusher didn't commit the transaction because it deemed the freed
space won't be enough to satisfy the current reserve ticket. Fix this
by accounting for space in trans_block_rsv when deciding whether the
current transaction should be committed or not.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b1b65750b8db67834482f758fc385bfa7560d228 upstream.
If FAT length == 0, the image doesn't have any data. And it can be the
cause of overlapping the root dir and FAT entries.
Also Windows treats it as invalid format.
Reported-by: syzbot+6f1624f937d9d6911e2d@syzkaller.appspotmail.com
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/87r1wz8mrd.fsf@mail.parknet.co.jp
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef1548adada51a2f32ed7faef50aa465e1b4c5da upstream.
Recently syzbot reported that unmounting proc when there is an ongoing
inotify watch on the root directory of proc could result in a use
after free when the watch is removed after the unmount of proc
when the watcher exits.
Commit 69879c01a0c3 ("proc: Remove the now unnecessary internal mount
of proc") made it easier to unmount proc and allowed syzbot to see the
problem, but looking at the code it has been around for a long time.
Looking at the code the fsnotify watch should have been removed by
fsnotify_sb_delete in generic_shutdown_super. Unfortunately the inode
was allocated with new_inode_pseudo instead of new_inode so the inode
was not on the sb->s_inodes list. Which prevented
fsnotify_unmount_inodes from finding the inode and removing the watch
as well as made it so the "VFS: Busy inodes after unmount" warning
could not find the inodes to warn about them.
Make all of the inodes in proc visible to generic_shutdown_super,
and fsnotify_sb_delete by using new_inode instead of new_inode_pseudo.
The only functional difference is that new_inode places the inodes
on the sb->s_inodes list.
I wrote a small test program and I can verify that without changes it
can trigger this issue, and by replacing new_inode_pseudo with
new_inode the issues goes away.
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/000000000000d788c905a7dfa3f4@google.com
Reported-by: syzbot+7d2debdcdb3cb93c1e5e@syzkaller.appspotmail.com
Fixes: 0097875bd415 ("proc: Implement /proc/thread-self to point at the directory of the current thread")
Fixes: 021ada7dff22 ("procfs: switch /proc/self away from proc_dir_entry")
Fixes: 51f0885e5415 ("vfs,proc: guarantee unique inodes in /proc")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 520da69d265a91c6536c63851cbb8a53946974f0 upstream.
In ovl_copy_xattr, if all the xattrs to be copied are overlayfs private
xattrs, the copy loop will terminate without assigning anything to the
error variable, thus returning an uninitialized value.
If ovl_copy_xattr is called from ovl_clear_empty, this uninitialized error
value is put into a pointer by ERR_PTR(), causing potential invalid memory
accesses down the line.
This commit initialize error with 0. This is the correct value because when
there's no xattr to copy, because all xattrs are private, ovl_copy_xattr
should succeed.
This bug is discovered with the help of INIT_STACK_ALL and clang.
Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com>
Link: https://bugs.chromium.org/p/chromium/issues/detail?id=1050405
Fixes: 0956254a2d5b ("ovl: don't copy up opaqueness")
Cc: stable@vger.kernel.org # v4.8
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8301c719a2bd131436438e49130ee381d30933f5 upstream.
After commit c3aab9a0bd91 ("mm/filemap.c: don't initiate writeback if
mapping has no dirty pages"), the following null pointer dereference has
been reported on nilfs2:
BUG: kernel NULL pointer dereference, address: 00000000000000a8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
...
RIP: 0010:percpu_counter_add_batch+0xa/0x60
...
Call Trace:
__test_set_page_writeback+0x2d3/0x330
nilfs_segctor_do_construct+0x10d3/0x2110 [nilfs2]
nilfs_segctor_construct+0x168/0x260 [nilfs2]
nilfs_segctor_thread+0x127/0x3b0 [nilfs2]
kthread+0xf8/0x130
...
This crash turned out to be caused by set_page_writeback() call for
segment summary buffers at nilfs_segctor_prepare_write().
set_page_writeback() can call inc_wb_stat(inode_to_wb(inode),
WB_WRITEBACK) where inode_to_wb(inode) is NULL if the inode of
underlying block device does not have an associated wb.
This fixes the issue by calling inode_attach_wb() in advance to ensure
to associate the bdev inode with its wb.
Fixes: c3aab9a0bd91 ("mm/filemap.c: don't initiate writeback if mapping has no dirty pages")
Reported-by: Walton Hoops <me@waltonhoops.com>
Reported-by: Tomas Hlavaty <tom@logand.com>
Reported-by: ARAI Shun-ichi <hermes@ceres.dti.ne.jp>
Reported-by: Hideki EIRAKU <hdk1983@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org> [5.4+]
Link: http://lkml.kernel.org/r/20200608.011819.1399059588922299158.konishi.ryusuke@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebf57440ec59a36e1fc5fe91e31d66ae0d1662d0 upstream.
Some of tests in xfstests failed with cifsd kernel server since commit
e80ddeb2f70e. cifsd kernel server validates credit charge from client
by calculating it base on max((InputCount + OutputCount) and
(MaxInputResponse + MaxOutputResponse)) according to specification.
MS-SMB2 specification describe credit charge calculation of smb2 ioctl :
If Connection.SupportsMultiCredit is TRUE, the server MUST validate
CreditCharge based on the maximum of (InputCount + OutputCount) and
(MaxInputResponse + MaxOutputResponse), as specified in section 3.3.5.2.5.
If the validation fails, it MUST fail the IOCTL request with
STATUS_INVALID_PARAMETER.
This patch add indatalen that can be a non-zero value to calculation of
credit charge in SMB2_ioctl_init().
Fixes: e80ddeb2f70e ("smb3: fix incorrect number of credits when ioctl
MaxOutputResponse > 64K")
Cc: Stable <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e80ddeb2f70ebd0786aa7cdba3e58bc931fa0bb5 upstream.
We were not checking to see if ioctl requests asked for more than
64K (ie when CIFSMaxBufSize was > 64K) so when setting larger
CIFSMaxBufSize then ioctls would fail with invalid parameter errors.
When requests ask for more than 64K in MaxOutputResponse then we
need to ask for more than 1 credit.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8c73c1a614f6da6c0b04c393f87447e28cb6de4 upstream.
Use kvfree() to free the pages and vmas, since they are allocated by
kvmalloc_array() in a loop.
Fixes: d4ef647510b1 ("io_uring: avoid page allocation warnings")
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200605093203.40087-1-efremov@linux.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 530f32fc370fd1431ea9802dbc53ab5601dfccdb upstream.
Avi Kivity reports that on fuse filesystems running in a user namespace
asyncronous fsync fails with EOVERFLOW.
The reason is that f_ops->fsync() is called with the creds of the kthread
performing aio work instead of the creds of the process originally
submitting IOCB_CMD_FSYNC.
Fuse sends the creds of the caller in the request header and it needs to
translate the uid and gid into the server's user namespace. Since the
kthread is running in init_user_ns, the translation will fail and the
operation returns an error.
It can be argued that fsync doesn't actually need any creds, but just
zeroing out those fields in the header (as with requests that currently
don't take creds) is a backward compatibility risk.
Instead of working around this issue in fuse, solve the core of the problem
by calling the filesystem with the proper creds.
Reported-by: Avi Kivity <avi@scylladb.com>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Fixes: c9582eb0ff7d ("fuse: Fail all requests with invalid uids or gids")
Cc: stable@vger.kernel.org # 4.18+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2f02fd3fa13e51713b630164f8a8e5b42de8283b ]
The comments in fanotify_group_event_mask() say:
"If the event is on dir/child and this mark doesn't care about
events on dir/child, don't send it!"
Specifically, mount and filesystem marks do not care about events
on child, but they can still specify an ignore mask for those events.
For example, a group that has:
- A mount mark with mask 0 and ignore_mask FAN_OPEN
- An inode mark on a directory with mask FAN_OPEN | FAN_OPEN_EXEC
with flag FAN_EVENT_ON_CHILD
A child file open for exec would be reported to group with the FAN_OPEN
event despite the fact that FAN_OPEN is in ignore mask of mount mark,
because the mark iteration loop skips over non-inode marks for events
on child when calculating the ignore mask.
Move ignore mask calculation to the top of the iteration loop block
before excluding marks for events on dir/child.
Link: https://lore.kernel.org/r/20200524072441.18258-1-amir73il@gmail.com
Reported-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/linux-fsdevel/20200521162443.GA26052@quack2.suse.cz/
Fixes: 55bf882c7f13 "fanotify: fix merging marks masks with FAN_ONDIR"
Fixes: b469e7e47c8a "fanotify: fix handling of events on child..."
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20be493b787cd581c9fffad7fcd6bfbe6af1050c ]
Fix several issues in the previous gfs2_find_jhead fix:
* When updating @blocks_submitted, @block refers to the first block block not
submitted yet, not the last block submitted, so fix an off-by-one error.
* We want to ensure that @blocks_submitted is far enough ahead of @blocks_read
to guarantee that there is in-flight I/O. Otherwise, we'll eventually end up
waiting for pages that haven't been submitted, yet.
* It's much easier to compare the number of blocks added with the number of
blocks submitted to limit the maximum bio size.
* Even with bio chaining, we can keep adding blocks until we reach the maximum
bio size, as long as we stop at a page boundary. This simplifies the logic.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d605416fb7175e1adf094251466caa52093b413 ]
KMSAN reported uninitialized data being written to disk when dumping
core. As a result, several kilobytes of kmalloc memory may be written
to the core file and then read by a non-privileged user.
Reported-by: sam <sunhaoyl@outlook.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200419100848.63472-1-glider@google.com
Link: https://github.com/google/kmsan/issues/76
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb33c114d3ed5bdac230716f5b0a93b56b92a90d ]
It's possible for the VFS to completely forget about an inode, but for
it to still be sitting on the cap release queue. If the MDS sends the
client a cap message for such an inode, it just ignores it today, which
can lead to a stall of up to 5s until the cap release queue is flushed.
If we get a cap message for an inode that can't be located, then go
ahead and flush the cap release queue.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/45532
Fixes: 1e9c2eb6811e ("ceph: delete stale dentry when last reference is dropped")
Reported-and-Tested-by: Andrej Filipčič <andrej.filipcic@ijs.si>
Suggested-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4e2f5e1a527ce58fc9f85145b03704779a3123e ]
This patch rearranges gfs2_add_revoke so that the extra glock
reference is added earlier on in the function to avoid races in which
the glock is freed before the new reference is taken.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ed0c30811cb4d30ef89850b787a53a84d5d2bcb ]
Before this patch, function gfs2_quota_lock checked if it was called
from a privileged user, and if so, it bypassed the quota check:
superuser can operate outside the quotas.
That's the wrong place for the check because the lock/unlock functions
are separate from the lock_check function, and you can do lock and
unlock without actually checking the quotas.
This patch moves the check to gfs2_quota_lock_check.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c410bf01933e5e09d142c66c3df9ad470a7eec13 upstream.
rxrpc currently uses a fixed 4s retransmission timeout until the RTT is
sufficiently sampled. This can cause problems with some fileservers with
calls to the cache manager in the afs filesystem being dropped from the
fileserver because a packet goes missing and the retransmission timeout is
greater than the call expiry timeout.
Fix this by:
(1) Copying the RTT/RTO calculation code from Linux's TCP implementation
and altering it to fit rxrpc.
(2) Altering the various users of the RTT to make use of the new SRTT
value.
(3) Replacing the use of rxrpc_resend_timeout to use the calculated RTO
value instead (which is needed in jiffies), along with a backoff.
Notes:
(1) rxrpc provides RTT samples by matching the serial numbers on outgoing
DATA packets that have the RXRPC_REQUEST_ACK set and PING ACK packets
against the reference serial number in incoming REQUESTED ACK and
PING-RESPONSE ACK packets.
(2) Each packet that is transmitted on an rxrpc connection gets a new
per-connection serial number, even for retransmissions, so an ACK can
be cross-referenced to a specific trigger packet. This allows RTT
information to be drawn from retransmitted DATA packets also.
(3) rxrpc maintains the RTT/RTO state on the rxrpc_peer record rather than
on an rxrpc_call because many RPC calls won't live long enough to
generate more than one sample.
(4) The calculated SRTT value is in units of 8ths of a microsecond rather
than nanoseconds.
The (S)RTT and RTO values are displayed in /proc/net/rxrpc/peers.
Fixes: 17926a79320a ([AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both"")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b14c94908b1b884276a6608dea3d0b1b510338b7 ]
This reverts commit df5db5f9ee112e76b5202fbc331f990a0fc316d6.
This patch fixes a regression: patch df5db5f9ee112 allowed function
run_queue() to bypass its call to do_xmote() if revokes were queued for
the glock. That's wrong because its call to do_xmote() is what is
responsible for calling the go_sync() glops functions to sync both
the ail list and any revokes queued for it. By bypassing the call,
gfs2 could get into a stand-off where the glock could not be demoted
until its revokes are written back, but the revokes would not be
written back because do_xmote() was never called.
It "sort of" works, however, because there are other mechanisms like
the log flush daemon (logd) that can sync the ail items and revokes,
if it deems it necessary. The problem is: without file system pressure,
it might never deem it necessary.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d8e28ff3106b093d98bfd2eceb9b430c70a8758 ]
If the ceph_mdsc_open_export_target_session() return fails, it will
do a "goto retry", but the session mutex has already been unlocked.
Re-lock the mutex in that case to ensure that we don't unlock it
twice.
Signed-off-by: Wu Bo <wubo40@huawei.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8aebfffacfa379ba400da573a5bf9e49634e38cb ]
configfs_rmdir() invokes configfs_get_config_item(), which returns a
reference of the specified config_item object to "parent_item" with
increased refcnt.
When configfs_rmdir() returns, local variable "parent_item" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
configfs_rmdir(). When down_write_killable() fails, the function forgets
to decrease the refcnt increased by configfs_get_config_item(), causing
a refcnt leak.
Fix this issue by calling config_item_put() when down_write_killable()
fails.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d1be4f4dc5ff1c66c86acfd2c35765d9e3776b3 ]
Don't call req->page_done() on each page as we finish filling it with
the data coming from the network. Whilst this might speed up the
application a bit, it's a problem if there's a network failure and the
operation has to be reissued.
If this happens, an oops occurs because afs_readpages_page_done() clears
the pointer to each page it unlocks and when a retry happens, the
pointers to the pages it wants to fill are now NULL (and the pages have
been unlocked anyway).
Instead, wait till the operation completes successfully and only then
release all the pages after clearing any terminal gap (the server can
give us less data than we requested as we're allowed to ask for more
than is available).
KASAN produces a bug like the following, and even without KASAN, it can
oops and panic.
BUG: KASAN: wild-memory-access in _copy_to_iter+0x323/0x5f4
Write of size 1404 at addr 0005088000000000 by task md5sum/5235
CPU: 0 PID: 5235 Comm: md5sum Not tainted 5.7.0-rc3-fscache+ #250
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
memcpy+0x39/0x58
_copy_to_iter+0x323/0x5f4
__skb_datagram_iter+0x89/0x2a6
skb_copy_datagram_iter+0x129/0x135
rxrpc_recvmsg_data.isra.0+0x615/0xd42
rxrpc_kernel_recv_data+0x1e9/0x3ae
afs_extract_data+0x139/0x33a
yfs_deliver_fs_fetch_data64+0x47a/0x91b
afs_deliver_to_call+0x304/0x709
afs_wait_for_call_to_complete+0x1cc/0x4ad
yfs_fs_fetch_data+0x279/0x288
afs_fetch_data+0x1e1/0x38d
afs_readpages+0x593/0x72e
read_pages+0xf5/0x21e
__do_page_cache_readahead+0x128/0x23f
ondemand_readahead+0x36e/0x37f
generic_file_buffered_read+0x234/0x680
new_sync_read+0x109/0x17e
vfs_read+0xe6/0x138
ksys_read+0xd8/0x14d
do_syscall_64+0x6e/0x8a
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Fixes: 196ee9cd2d04 ("afs: Make afs_fs_fetch_data() take a list of pages")
Fixes: 30062bd13e36 ("afs: Implement YFS support in the fs client")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecf84096a526f2632ee85c32a3d05de3fa60ce80 ]
When "ubifs: introduce UBIFS_ATIME_SUPPORT to ubifs" introduced atime
support to ubifs, it also added lazytime support. As far as I can tell
the lazytime support is terminally broken, as it causes
mark_inode_dirty_sync to be called from __writeback_single_inode, which
will then trigger the locking assert in ubifs_dirty_inode. Just remove
the broken lazytime support for now, it can be added back later,
especially as some infrastructure changes should make that easier soon.
Fixes: 8c1c5f263833 ("ubifs: introduce UBIFS_ATIME_SUPPORT to ubifs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e89b7210403fa4a8acafe7c602b6212b7af6c3b ]
cpy and set really should be size_t; we won't get an overflow on that,
since sysctl_nr_open can't be set above ~(size_t)0 / sizeof(void *),
so nr that would've managed to overflow size_t on that multiplication
won't get anywhere near copy_fdtable() - we'll fail with EMFILE
before that.
Cc: stable@kernel.org # v2.6.25+
Fixes: 9cfe015aa424 (get rid of NR_OPEN and introduce a sysctl_nr_open)
Reported-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c3c32f85b6cc05e5db78693457deff03ac0f434 ]
crypto_shash_descsize() returns the size of the shash_desc context
needed to compute the hash, not the size of the hash itself.
crypto_shash_digestsize() would be correct, or alternatively using
c->hash_len and c->hmac_desc_len which already store the correct values.
But actually it's simpler to just use stack arrays, so do that instead.
Fixes: 49525e5eecca ("ubifs: Add helper functions for authentication support")
Fixes: da8ef65f9573 ("ubifs: Authenticate replayed journal")
Cc: <stable@vger.kernel.org> # v4.20+
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 55bf882c7f13dda8bbe624040c6d5b4fbb812d16 upstream.
Change the logic of FAN_ONDIR in two ways that are similar to the logic
of FAN_EVENT_ON_CHILD, that was fixed in commit 54a307ba8d3c ("fanotify:
fix logic of events on child"):
1. The flag is meaningless in ignore mask
2. The flag refers only to events in the mask of the mark where it is set
This is what the fanotify_mark.2 man page says about FAN_ONDIR:
"Without this flag, only events for files are created." It doesn't
say anything about setting this flag in ignore mask to stop getting
events on directories nor can I think of any setup where this capability
would be useful.
Currently, when marks masks are merged, the FAN_ONDIR flag set in one
mark affects the events that are set in another mark's mask and this
behavior causes unexpected results. For example, a user adds a mark on a
directory with mask FAN_ATTRIB | FAN_ONDIR and a mount mark with mask
FAN_OPEN (without FAN_ONDIR). An opendir() of that directory (which is
inside that mount) generates a FAN_OPEN event even though neither of the
marks requested to get open events on directories.
Link: https://lore.kernel.org/r/20200319151022.31456-10-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Rachel Sibley <rasibley@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann