forked from TencentOS/TencentOS-kernel
425 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Alexei Starovoitov
|
06fa64d2b1 |
bpf: Introduce dynamic program extensions
[upstream commit be8704ff07d2374bcc5c675526f95e70c6459683] Introduce dynamic program extensions. The users can load additional BPF functions and replace global functions in previously loaded BPF programs while these programs are executing. Global functions are verified individually by the verifier based on their types only. Hence the global function in the new program which types match older function can safely replace that corresponding function. This new function/program is called 'an extension' of old program. At load time the verifier uses (attach_prog_fd, attach_btf_id) pair to identify the function to be replaced. The BPF program type is derived from the target program into extension program. Technically bpf_verifier_ops is copied from target program. The BPF_PROG_TYPE_EXT program type is a placeholder. It has empty verifier_ops. The extension program can call the same bpf helper functions as target program. Single BPF_PROG_TYPE_EXT type is used to extend XDP, SKB and all other program types. The verifier allows only one level of replacement. Meaning that the extension program cannot recursively extend an extension. That also means that the maximum stack size is increasing from 512 to 1024 bytes and maximum function nesting level from 8 to 16. The programs don't always consume that much. The stack usage is determined by the number of on-stack variables used by the program. The verifier could have enforced 512 limit for combined original plus extension program, but it makes for difficult user experience. The main use case for extensions is to provide generic mechanism to plug external programs into policy program or function call chaining. BPF trampoline is used to track both fentry/fexit and program extensions because both are using the same nop slot at the beginning of every BPF function. Attaching fentry/fexit to a function that was replaced is not allowed. The opposite is true as well. Replacing a function that currently being analyzed with fentry/fexit is not allowed. The executable page allocated by BPF trampoline is not used by program extensions. This inefficiency will be optimized in future patches. Function by function verification of global function supports scalars and pointer to context only. Hence program extensions are supported for such class of global functions only. In the future the verifier will be extended with support to pointers to structures, arrays with sizes, etc. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200121005348.2769920-2-ast@kernel.org |
|
|
Lorenz Bauer
|
d91340bfbc |
bpf: sockmap: Move generic sockmap hooks from BPF TCP
[upstream commit f747632b608f90217a4e9ebb1deba8a37612aa32] The init, close and unhash handlers from TCP sockmap are generic, and can be reused by UDP sockmap. Move the helpers into the sockmap code base and expose them. This requires tcp_bpf_get_proto and tcp_bpf_clone to be conditional on BPF_STREAM_PARSER. The moved functions are unmodified, except that sk_psock_unlink is renamed to sock_map_unlink to better match its behaviour. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200309111243.6982-6-lmb@cloudflare.com |
|
|
Lorenz Bauer
|
fcc95c13a3 |
skmsg: Update saved hooks only once
[upstream commit 1a2e20132db7bb76dd4f97b8364bd167227dd15f] Only update psock->saved_* if psock->sk_proto has not been initialized yet. This allows us to get rid of tcp_bpf_reinit_sk_prot. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200309111243.6982-3-lmb@cloudflare.com |
|
|
Lorenz Bauer
|
b3db6a2acc |
bpf: sockmap: Only check ULP for TCP sockets
[upstream commit 7b70973d7edb2f005511102d5a2e0116464a46a1] The sock map code checks that a socket does not have an active upper layer protocol before inserting it into the map. This requires casting via inet_csk, which isn't valid for UDP sockets. Guard checks for ULP by checking inet_sk(sk)->is_icsk first. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200309111243.6982-2-lmb@cloudflare.com |
|
|
Jakub Sitnicki
|
2fe57b559b |
net, sk_msg: Annotate lockless access to sk_prot on clone
[upstream commit b8e202d1d1d0f182f01062804efb523ea9a9008c]
sk_msg and ULP frameworks override protocol callbacks pointer in
sk->sk_prot, while tcp accesses it locklessly when cloning the listening
socket, that is with neither sk_lock nor sk_callback_lock held.
Once we enable use of listening sockets with sockmap (and hence sk_msg),
there will be shared access to sk->sk_prot if socket is getting cloned
while being inserted/deleted to/from the sockmap from another CPU:
Read side:
tcp_v4_rcv
sk = __inet_lookup_skb(...)
tcp_check_req(sk)
inet_csk(sk)->icsk_af_ops->syn_recv_sock
tcp_v4_syn_recv_sock
tcp_create_openreq_child
inet_csk_clone_lock
sk_clone_lock
READ_ONCE(sk->sk_prot)
Write side:
sock_map_ops->map_update_elem
sock_map_update_elem
sock_map_update_common
sock_map_link_no_progs
tcp_bpf_init
tcp_bpf_update_sk_prot
sk_psock_update_proto
WRITE_ONCE(sk->sk_prot, ops)
sock_map_ops->map_delete_elem
sock_map_delete_elem
__sock_map_delete
sock_map_unref
sk_psock_put
sk_psock_drop
sk_psock_restore_proto
tcp_update_ulp
WRITE_ONCE(sk->sk_prot, proto)
Mark the shared access with READ_ONCE/WRITE_ONCE annotations.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200218171023.844439-2-jakub@cloudflare.com
|
|
|
Björn Töpel
|
9295181a8b |
bpf, x86: Align dispatcher branch targets to 16B
[upstream commit 116eb788f57c9c35c40b29cfaa2607020de99a84] >From Intel 64 and IA-32 Architectures Optimization Reference Manual, 3.4.1.4 Code Alignment, Assembly/Compiler Coding Rule 11: All branch targets should be 16-byte aligned. This commits aligns branch targets according to the Intel manual. The nops used to align branch targets make the dispatcher larger, and therefore the number of supported dispatch points/programs are descreased from 64 to 48. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191213175112.30208-7-bjorn.topel@gmail.com |
|
|
Björn Töpel
|
c8c1093200 |
bpf, xdp: Start using the BPF dispatcher for XDP
[upstream commit 7e6897f95935973c3253fd756135b5ea58043dc8] This commit adds a BPF dispatcher for XDP. The dispatcher is updated from the XDP control-path, dev_xdp_install(), and used when an XDP program is run via bpf_prog_run_xdp(). Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191213175112.30208-4-bjorn.topel@gmail.com |
|
|
Björn Töpel
|
13ed7308a3 |
bpf: Introduce BPF dispatcher
[upstream commit 75ccbef6369e94ecac696a152a998a978d41376b] The BPF dispatcher is a multi-way branch code generator, mainly targeted for XDP programs. When an XDP program is executed via the bpf_prog_run_xdp(), it is invoked via an indirect call. The indirect call has a substantial performance impact, when retpolines are enabled. The dispatcher transform indirect calls to direct calls, and therefore avoids the retpoline. The dispatcher is generated using the BPF JIT, and relies on text poking provided by bpf_arch_text_poke(). The dispatcher hijacks a trampoline function it via the __fentry__ nop of the trampoline. One dispatcher instance currently supports up to 64 dispatch points. A user creates a dispatcher with its corresponding trampoline with the DEFINE_BPF_DISPATCHER macro. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191213175112.30208-3-bjorn.topel@gmail.com |
|
|
Björn Töpel
|
0be30b3de4 |
bpf: Move trampoline JIT image allocation to a function
[upstream commit 98e8627efcada18ac043a77b9101b4b4c768090b] Refactor the image allocation in the BPF trampoline code into a separate function, so it can be shared with the BPF dispatcher in upcoming commits. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191213175112.30208-2-bjorn.topel@gmail.com |
|
|
Daniel Borkmann
|
96f0a27a5a |
bpf: Simplify __bpf_arch_text_poke poke type handling
[upstream commit b553a6ec570044fc1ae300c6fb24f9ce204c5894]
Given that we have BPF_MOD_NOP_TO_{CALL,JUMP}, BPF_MOD_{CALL,JUMP}_TO_NOP
and BPF_MOD_{CALL,JUMP}_TO_{CALL,JUMP} poke types and that we also pass in
old_addr as well as new_addr, it's a bit redundant and unnecessarily
complicates __bpf_arch_text_poke() itself since we can derive the same from
the *_addr that were passed in. Hence simplify and use BPF_MOD_{CALL,JUMP}
as types which also allows to clean up call-sites.
In addition to that, __bpf_arch_text_poke() currently verifies that text
matches expected old_insn before we invoke text_poke_bp(). Also add a check
on new_insn and skip rewrite if it already matches. Reason why this is rather
useful is that it avoids making any special casing in prog_array_map_poke_run()
when old and new prog were NULL and has the benefit that also for this case
we perform a check on text whether it really matches our expectations.
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/fcb00a2b0b288d6c73de4ef58116a821c8fe8f2f.1574555798.git.daniel@iogearbox.net
|
|
|
Daniel Borkmann
|
716521bc11 |
bpf: Constant map key tracking for prog array pokes
[upstream commit d2e4c1e6c2947269346054ac8937ccfe9e0bcc6b]
Add tracking of constant keys into tail call maps. The signature of
bpf_tail_call_proto is that arg1 is ctx, arg2 map pointer and arg3
is a index key. The direct call approach for tail calls can be enabled
if the verifier asserted that for all branches leading to the tail call
helper invocation, the map pointer and index key were both constant
and the same.
Tracking of map pointers we already do from prior work via c93552c443eb
("bpf: properly enforce index mask to prevent out-of-bounds speculation")
and 09772d92cd5a ("bpf: avoid retpoline for lookup/update/ delete calls
on maps").
Given the tail call map index key is not on stack but directly in the
register, we can add similar tracking approach and later in fixup_bpf_calls()
add a poke descriptor to the progs poke_tab with the relevant information
for the JITing phase.
We internally reuse insn->imm for the rewritten BPF_JMP | BPF_TAIL_CALL
instruction in order to point into the prog's poke_tab, and keep insn->imm
as 0 as indicator that current indirect tail call emission must be used.
Note that publishing to the tracker must happen at the end of fixup_bpf_calls()
since adding elements to the poke_tab reallocates its memory, so we need
to wait until its in final state.
Future work can generalize and add similar approach to optimize plain
array map lookups. Difference there is that we need to look into the key
value that sits on stack. For clarity in bpf_insn_aux_data, map_state
has been renamed into map_ptr_state, so we get map_{ptr,key}_state as
trackers.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/e8db37f6b2ae60402fa40216c96738ee9b316c32.1574452833.git.daniel@iogearbox.net
|
|
|
Daniel Borkmann
|
f3e106acf7 |
bpf: Add poke dependency tracking for prog array maps
[upstream commit da765a2f599304a81a25e77908d1790414ecdbb6]
This work adds program tracking to prog array maps. This is needed such
that upon prog array updates/deletions we can fix up all programs which
make use of this tail call map. We add ops->map_poke_{un,}track()
helpers to maps to maintain the list of programs and ops->map_poke_run()
for triggering the actual update.
bpf_array_aux is extended to contain the list head and poke_mutex in
order to serialize program patching during updates/deletions.
bpf_free_used_maps() will untrack the program shortly before dropping
the reference to the map. For clearing out the prog array once all urefs
are dropped we need to use schedule_work() to have a sleepable context.
The prog_array_map_poke_run() is triggered during updates/deletions and
walks the maintained prog list. It checks in their poke_tabs whether the
map and key is matching and runs the actual bpf_arch_text_poke() for
patching in the nop or new jmp location. Depending on the type of update,
we use one of BPF_MOD_{NOP_TO_JUMP,JUMP_TO_NOP,JUMP_TO_JUMP}.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/1fb364bb3c565b3e415d5ea348f036ff379e779d.1574452833.git.daniel@iogearbox.net
|
|
|
Daniel Borkmann
|
8c34151add |
bpf: Add initial poke descriptor table for jit images
[upstream commit a66886fe6c24ebeeb6dc10fbd9b75158029eacf7] Add initial poke table data structures and management to the BPF prog that can later be used by JITs. Also add an instance of poke specific data for tail call maps; plan for later work is to extend this also for BPF static keys. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/1db285ec2ea4207ee0455b3f8e191a4fc58b9ade.1574452833.git.daniel@iogearbox.net |
|
|
Daniel Borkmann
|
939f654234 |
bpf: Move owner type, jited info into array auxiliary data
[upstream commit 2beee5f57441413b64a9c2bd657e17beabb98d1c] We're going to extend this with further information which is only relevant for prog array at this point. Given this info is not used in critical path, move it into its own structure such that the main array map structure can be kept on diet. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/b9ddccdb0f6f7026489ee955f16c96381e1e7238.1574452833.git.daniel@iogearbox.net |
|
|
Daniel Borkmann
|
65960e42d4 |
bpf: Move bpf_free_used_maps into sleepable section
[upstream commit 6332be04c039a72fca32ed0a4265bac58d606bb6] We later on are going to need a sleepable context as opposed to plain RCU callback in order to untrack programs we need to poke at runtime and tracking as well as image update is performed under mutex. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/09823b1d5262876e9b83a8e75df04cf0467357a4.1574452833.git.daniel@iogearbox.net |
|
|
Daniel Borkmann
|
a1a6094069 |
bpf, x86: Generalize and extend bpf_arch_text_poke for direct jumps
[upstream commit 4b3da77b72ad6b3c48c6fe4a395ace7db39a12c5]
Add BPF_MOD_{NOP_TO_JUMP,JUMP_TO_JUMP,JUMP_TO_NOP} patching for x86
JIT in order to be able to patch direct jumps or nop them out. We need
this facility in order to patch tail call jumps and in later work also
BPF static keys.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/aa4784196a8e5e985af4b30a4fe5336bce6e9643.1574452833.git.daniel@iogearbox.net
|
|
|
Alexei Starovoitov
|
9d896b57f6 |
bpf: Introduce function-by-function verification
[upstream commit 51c39bb1d5d105a02e29aa7960f0a395086e6342]
New llvm and old llvm with libbpf help produce BTF that distinguish global and
static functions. Unlike arguments of static function the arguments of global
functions cannot be removed or optimized away by llvm. The compiler has to use
exactly the arguments specified in a function prototype. The argument type
information allows the verifier validate each global function independently.
For now only supported argument types are pointer to context and scalars. In
the future pointers to structures, sizes, pointer to packet data can be
supported as well. Consider the following example:
static int f1(int ...)
{
...
}
int f3(int b);
int f2(int a)
{
f1(a) + f3(a);
}
int f3(int b)
{
...
}
int main(...)
{
f1(...) + f2(...) + f3(...);
}
The verifier will start its safety checks from the first global function f2().
It will recursively descend into f1() because it's static. Then it will check
that arguments match for the f3() invocation inside f2(). It will not descend
into f3(). It will finish f2() that has to be successfully verified for all
possible values of 'a'. Then it will proceed with f3(). That function also has
to be safe for all possible values of 'b'. Then it will start subprog 0 (which
is main() function). It will recursively descend into f1() and will skip full
check of f2() and f3(), since they are global. The order of processing global
functions doesn't affect safety, since all global functions must be proven safe
based on their arguments only.
Such function by function verification can drastically improve speed of the
verification and reduce complexity.
Note that the stack limit of 512 still applies to the call chain regardless whether
functions were static or global. The nested level of 8 also still applies. The
same recursion prevention checks are in place as well.
The type information and static/global kind is preserved after the verification
hence in the above example global function f2() and f3() can be replaced later
by equivalent functions with the same types that are loaded and verified later
without affecting safety of this main() program. Such replacement (re-linking)
of global functions is a subject of future patches.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200110064124.1760511-3-ast@kernel.org
|
|
|
Martin KaFai Lau
|
7b7f9cc437 |
bpf: tcp: Support tcp_congestion_ops in bpf
[upstream commit 0baf26b0fcd74bbfcef53c5d5e8bad2b99c8d0d2] This patch makes "struct tcp_congestion_ops" to be the first user of BPF STRUCT_OPS. It allows implementing a tcp_congestion_ops in bpf. The BPF implemented tcp_congestion_ops can be used like regular kernel tcp-cc through sysctl and setsockopt. e.g. [root@arch-fb-vm1 bpf]# sysctl -a | egrep congestion net.ipv4.tcp_allowed_congestion_control = reno cubic bpf_cubic net.ipv4.tcp_available_congestion_control = reno bic cubic bpf_cubic net.ipv4.tcp_congestion_control = bpf_cubic There has been attempt to move the TCP CC to the user space (e.g. CCP in TCP). The common arguments are faster turn around, get away from long-tail kernel versions in production...etc, which are legit points. BPF has been the continuous effort to join both kernel and userspace upsides together (e.g. XDP to gain the performance advantage without bypassing the kernel). The recent BPF advancements (in particular BTF-aware verifier, BPF trampoline, BPF CO-RE...) made implementing kernel struct ops (e.g. tcp cc) possible in BPF. It allows a faster turnaround for testing algorithm in the production while leveraging the existing (and continue growing) BPF feature/framework instead of building one specifically for userspace TCP CC. This patch allows write access to a few fields in tcp-sock (in bpf_tcp_ca_btf_struct_access()). The optional "get_info" is unsupported now. It can be added later. One possible way is to output the info with a btf-id to describe the content. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200109003508.3856115-1-kafai@fb.com |
|
|
Martin KaFai Lau
|
e0e316fc1f |
bpf: Introduce BPF_MAP_TYPE_STRUCT_OPS
[upstream commit 85d33df357b634649ddbe0a20fd2d0fc5732c3cb]
The patch introduces BPF_MAP_TYPE_STRUCT_OPS. The map value
is a kernel struct with its func ptr implemented in bpf prog.
This new map is the interface to register/unregister/introspect
a bpf implemented kernel struct.
The kernel struct is actually embedded inside another new struct
(or called the "value" struct in the code). For example,
"struct tcp_congestion_ops" is embbeded in:
struct bpf_struct_ops_tcp_congestion_ops {
refcount_t refcnt;
enum bpf_struct_ops_state state;
struct tcp_congestion_ops data; /* <-- kernel subsystem struct here */
}
The map value is "struct bpf_struct_ops_tcp_congestion_ops".
The "bpftool map dump" will then be able to show the
state ("inuse"/"tobefree") and the number of subsystem's refcnt (e.g.
number of tcp_sock in the tcp_congestion_ops case). This "value" struct
is created automatically by a macro. Having a separate "value" struct
will also make extending "struct bpf_struct_ops_XYZ" easier (e.g. adding
"void (*init)(void)" to "struct bpf_struct_ops_XYZ" to do some
initialization works before registering the struct_ops to the kernel
subsystem). The libbpf will take care of finding and populating the
"struct bpf_struct_ops_XYZ" from "struct XYZ".
Register a struct_ops to a kernel subsystem:
1. Load all needed BPF_PROG_TYPE_STRUCT_OPS prog(s)
2. Create a BPF_MAP_TYPE_STRUCT_OPS with attr->btf_vmlinux_value_type_id
set to the btf id "struct bpf_struct_ops_tcp_congestion_ops" of the
running kernel.
Instead of reusing the attr->btf_value_type_id,
btf_vmlinux_value_type_id s added such that attr->btf_fd can still be
used as the "user" btf which could store other useful sysadmin/debug
info that may be introduced in the furture,
e.g. creation-date/compiler-details/map-creator...etc.
3. Create a "struct bpf_struct_ops_tcp_congestion_ops" object as described
in the running kernel btf. Populate the value of this object.
The function ptr should be populated with the prog fds.
4. Call BPF_MAP_UPDATE with the object created in (3) as
the map value. The key is always "0".
During BPF_MAP_UPDATE, the code that saves the kernel-func-ptr's
args as an array of u64 is generated. BPF_MAP_UPDATE also allows
the specific struct_ops to do some final checks in "st_ops->init_member()"
(e.g. ensure all mandatory func ptrs are implemented).
If everything looks good, it will register this kernel struct
to the kernel subsystem. The map will not allow further update
from this point.
Unregister a struct_ops from the kernel subsystem:
BPF_MAP_DELETE with key "0".
Introspect a struct_ops:
BPF_MAP_LOOKUP_ELEM with key "0". The map value returned will
have the prog _id_ populated as the func ptr.
The map value state (enum bpf_struct_ops_state) will transit from:
INIT (map created) =>
INUSE (map updated, i.e. reg) =>
TOBEFREE (map value deleted, i.e. unreg)
The kernel subsystem needs to call bpf_struct_ops_get() and
bpf_struct_ops_put() to manage the "refcnt" in the
"struct bpf_struct_ops_XYZ". This patch uses a separate refcnt
for the purose of tracking the subsystem usage. Another approach
is to reuse the map->refcnt and then "show" (i.e. during map_lookup)
the subsystem's usage by doing map->refcnt - map->usercnt to filter out
the map-fd/pinned-map usage. However, that will also tie down the
future semantics of map->refcnt and map->usercnt.
The very first subsystem's refcnt (during reg()) holds one
count to map->refcnt. When the very last subsystem's refcnt
is gone, it will also release the map->refcnt. All bpf_prog will be
freed when the map->refcnt reaches 0 (i.e. during map_free()).
Here is how the bpftool map command will look like:
[root@arch-fb-vm1 bpf]# bpftool map show
6: struct_ops name dctcp flags 0x0
key 4B value 256B max_entries 1 memlock 4096B
btf_id 6
[root@arch-fb-vm1 bpf]# bpftool map dump id 6
[{
"value": {
"refcnt": {
"refs": {
"counter": 1
}
},
"state": 1,
"data": {
"list": {
"next": 0,
"prev": 0
},
"key": 0,
"flags": 2,
"init": 24,
"release": 0,
"ssthresh": 25,
"cong_avoid": 30,
"set_state": 27,
"cwnd_event": 28,
"in_ack_event": 26,
"undo_cwnd": 29,
"pkts_acked": 0,
"min_tso_segs": 0,
"sndbuf_expand": 0,
"cong_control": 0,
"get_info": 0,
"name": [98,112,102,95,100,99,116,99,112,0,0,0,0,0,0,0
],
"owner": 0
}
}
}
]
Misc Notes:
* bpf_struct_ops_map_sys_lookup_elem() is added for syscall lookup.
It does an inplace update on "*value" instead returning a pointer
to syscall.c. Otherwise, it needs a separate copy of "zero" value
for the BPF_STRUCT_OPS_STATE_INIT to avoid races.
* The bpf_struct_ops_map_delete_elem() is also called without
preempt_disable() from map_delete_elem(). It is because
the "->unreg()" may requires sleepable context, e.g.
the "tcp_unregister_congestion_control()".
* "const" is added to some of the existing "struct btf_func_model *"
function arg to avoid a compiler warning caused by this patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003505.3855919-1-kafai@fb.com
|
|
|
Martin KaFai Lau
|
50cc9417c1 |
bpf: Introduce BPF_PROG_TYPE_STRUCT_OPS
[upstream commit 27ae7997a66174cb8afd6a75b3989f5e0c1b9e5a] This patch allows the kernel's struct ops (i.e. func ptr) to be implemented in BPF. The first use case in this series is the "struct tcp_congestion_ops" which will be introduced in a latter patch. This patch introduces a new prog type BPF_PROG_TYPE_STRUCT_OPS. The BPF_PROG_TYPE_STRUCT_OPS prog is verified against a particular func ptr of a kernel struct. The attr->attach_btf_id is the btf id of a kernel struct. The attr->expected_attach_type is the member "index" of that kernel struct. The first member of a struct starts with member index 0. That will avoid ambiguity when a kernel struct has multiple func ptrs with the same func signature. For example, a BPF_PROG_TYPE_STRUCT_OPS prog is written to implement the "init" func ptr of the "struct tcp_congestion_ops". The attr->attach_btf_id is the btf id of the "struct tcp_congestion_ops" of the _running_ kernel. The attr->expected_attach_type is 3. The ctx of BPF_PROG_TYPE_STRUCT_OPS is an array of u64 args saved by arch_prepare_bpf_trampoline that will be done in the next patch when introducing BPF_MAP_TYPE_STRUCT_OPS. "struct bpf_struct_ops" is introduced as a common interface for the kernel struct that supports BPF_PROG_TYPE_STRUCT_OPS prog. The supporting kernel struct will need to implement an instance of the "struct bpf_struct_ops". The supporting kernel struct also needs to implement a bpf_verifier_ops. During BPF_PROG_LOAD, bpf_struct_ops_find() will find the right bpf_verifier_ops by searching the attr->attach_btf_id. A new "btf_struct_access" is also added to the bpf_verifier_ops such that the supporting kernel struct can optionally provide its own specific check on accessing the func arg (e.g. provide limited write access). After btf_vmlinux is parsed, the new bpf_struct_ops_init() is called to initialize some values (e.g. the btf id of the supporting kernel struct) and it can only be done once the btf_vmlinux is available. The R0 checks at BPF_EXIT is excluded for the BPF_PROG_TYPE_STRUCT_OPS prog if the return type of the prog->aux->attach_func_proto is "void". Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200109003503.3855825-1-kafai@fb.com |
|
|
Alexei Starovoitov
|
1019781c9b |
bpf: Support attaching tracing BPF program to other BPF programs
[upstream commit 5b92a28aae4dd0f88778d540ecfdcdaec5a41723] Allow FENTRY/FEXIT BPF programs to attach to other BPF programs of any type including their subprograms. This feature allows snooping on input and output packets in XDP, TC programs including their return values. In order to do that the verifier needs to track types not only of vmlinux, but types of other BPF programs as well. The verifier also needs to translate uapi/linux/bpf.h types used by networking programs into kernel internal BTF types used by FENTRY/FEXIT BPF programs. In some cases LLVM optimizations can remove arguments from BPF subprograms without adjusting BTF info that LLVM backend knows. When BTF info disagrees with actual types that the verifiers sees the BPF trampoline has to fallback to conservative and treat all arguments as u64. The FENTRY/FEXIT program can still attach to such subprograms, but it won't be able to recognize pointer types like 'struct sk_buff *' and it won't be able to pass them to bpf_skb_output() for dumping packets to user space. The FENTRY/FEXIT program would need to use bpf_probe_read_kernel() instead. The BPF_PROG_LOAD command is extended with attach_prog_fd field. When it's set to zero the attach_btf_id is one vmlinux BTF type ids. When attach_prog_fd points to previously loaded BPF program the attach_btf_id is BTF type id of main function or one of its subprograms. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191114185720.1641606-18-ast@kernel.org |
|
|
Alexei Starovoitov
|
0c5eebab3e |
bpf: Compare BTF types of functions arguments with actual types
[upstream commit 8c1b6e69dcc1e11bd24111e3734dd740aaf3fda1] Make the verifier check that BTF types of function arguments match actual types passed into top-level BPF program and into BPF-to-BPF calls. If types match such BPF programs and sub-programs will have full support of BPF trampoline. If types mismatch the trampoline has to be conservative. It has to save/restore five program arguments and assume 64-bit scalars. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191114185720.1641606-17-ast@kernel.org |
|
|
Alexei Starovoitov
|
8bce2cb466 |
bpf: Annotate context types
[upstream commit 91cc1a99740e2ed1d903b5906afb470cc5a07379]
Annotate BPF program context types with program-side type and kernel-side type.
This type information is used by the verifier. btf_get_prog_ctx_type() is
used in the later patches to verify that BTF type of ctx in BPF program matches to
kernel expected ctx type. For example, the XDP program type is:
BPF_PROG_TYPE(BPF_PROG_TYPE_XDP, xdp, struct xdp_md, struct xdp_buff)
That means that XDP program should be written as:
int xdp_prog(struct xdp_md *ctx) { ... }
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-16-ast@kernel.org
|
|
|
Alexei Starovoitov
|
48e22b50d7 |
bpf: Fix race in btf_resolve_helper_id()
[upstream commit 9cc31b3a092d9bf2a18f09ad77e727ddb42a5b1e]
btf_resolve_helper_id() caching logic is a bit racy, since under root the
verifier can verify several programs in parallel. Fix it with READ/WRITE_ONCE.
Fix the type as well, since error is also recorded.
Fixes: a7658e1a4164 ("bpf: Check types of arguments passed into helpers")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-15-ast@kernel.org
|
|
|
Daniel Borkmann
|
ac616f7935 |
uaccess: Add strict non-pagefault kernel-space read function
[upstream commit 75a1a607bb7e6d918be3aca11ec2214a275392f4]
Add two new probe_kernel_read_strict() and strncpy_from_unsafe_strict()
helpers which by default alias to the __probe_kernel_read() and the
__strncpy_from_unsafe(), respectively, but can be overridden by archs
which have non-overlapping address ranges for kernel space and user
space in order to bail out with -EFAULT when attempting to probe user
memory including non-canonical user access addresses [0]:
4-level page tables:
user-space mem: 0x0000000000000000 - 0x00007fffffffffff
non-canonical: 0x0000800000000000 - 0xffff7fffffffffff
5-level page tables:
user-space mem: 0x0000000000000000 - 0x00ffffffffffffff
non-canonical: 0x0100000000000000 - 0xfeffffffffffffff
The idea is that these helpers are complementary to the probe_user_read()
and strncpy_from_unsafe_user() which probe user-only memory. Both added
helpers here do the same, but for kernel-only addresses.
Both set of helpers are going to be used for BPF tracing. They also
explicitly avoid throwing the splat for non-canonical user addresses from
00c42373d397 ("x86-64: add warning for non-canonical user access address
dereferences").
For compat, the current probe_kernel_read() and strncpy_from_unsafe() are
left as-is.
[0] Documentation/x86/x86_64/mm.txt
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: x86@kernel.org
Link: https://lore.kernel.org/bpf/eefeefd769aa5a013531f491a71f0936779e916b.1572649915.git.daniel@iogearbox.net
|
|
|
Zhiping du
|
45d9aa262b |
bpf: Add bpf_arch_text_poke() helper
[upstream commit 5964b2000f283ff5df366f718e0f083ebbaae977] Add bpf_arch_text_poke() helper that is used by BPF trampoline logic to patch nops/calls in kernel text into calls into BPF trampoline and to patch calls/nops inside BPF programs too. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191114185720.1641606-4-ast@kernel.org |
|
|
Zhiping du
|
2a8eff19d5 |
bpf: Introduce BPF trampoline
[upstream commit fec56f5890d93fc2ed74166c397dc186b1c25951] Introduce BPF trampoline concept to allow kernel code to call into BPF programs with practically zero overhead. The trampoline generation logic is architecture dependent. It's converting native calling convention into BPF calling convention. BPF ISA is 64-bit (even on 32-bit architectures). The registers R1 to R5 are used to pass arguments into BPF functions. The main BPF program accepts only single argument "ctx" in R1. Whereas CPU native calling convention is different. x86-64 is passing first 6 arguments in registers and the rest on the stack. x86-32 is passing first 3 arguments in registers. sparc64 is passing first 6 in registers. And so on. The trampolines between BPF and kernel already exist. BPF_CALL_x macros in include/linux/filter.h statically compile trampolines from BPF into kernel helpers. They convert up to five u64 arguments into kernel C pointers and integers. On 64-bit architectures this BPF_to_kernel trampolines are nops. On 32-bit architecture they're meaningful. The opposite job kernel_to_BPF trampolines is done by CAST_TO_U64 macros and __bpf_trace_##call() shim functions in include/trace/bpf_probe.h. They convert kernel function arguments into array of u64s that BPF program consumes via R1=ctx pointer. This patch set is doing the same job as __bpf_trace_##call() static trampolines, but dynamically for any kernel function. There are ~22k global kernel functions that are attachable via nop at function entry. The function arguments and types are described in BTF. The job of btf_distill_func_proto() function is to extract useful information from BTF into "function model" that architecture dependent trampoline generators will use to generate assembly code to cast kernel function arguments into array of u64s. For example the kernel function eth_type_trans has two pointers. They will be casted to u64 and stored into stack of generated trampoline. The pointer to that stack space will be passed into BPF program in R1. On x86-64 such generated trampoline will consume 16 bytes of stack and two stores of %rdi and %rsi into stack. The verifier will make sure that only two u64 are accessed read-only by BPF program. The verifier will also recognize the precise type of the pointers being accessed and will not allow typecasting of the pointer to a different type within BPF program. The tracing use case in the datacenter demonstrated that certain key kernel functions have (like tcp_retransmit_skb) have 2 or more kprobes that are always active. Other functions have both kprobe and kretprobe. So it is essential to keep both kernel code and BPF programs executing at maximum speed. Hence generated BPF trampoline is re-generated every time new program is attached or detached to maintain maximum performance. To avoid the high cost of retpoline the attached BPF programs are called directly. __bpf_prog_enter/exit() are used to support per-program execution stats. In the future this logic will be optimized further by adding support for bpf_stats_enabled_key inside generated assembly code. Introduction of preemptible and sleepable BPF programs will completely remove the need to call to __bpf_prog_enter/exit(). Detach of a BPF program from the trampoline should not fail. To avoid memory allocation in detach path the half of the page is used as a reserve and flipped after each attach/detach. 2k bytes is enough to call 40+ BPF programs directly which is enough for BPF tracing use cases. This limit can be increased in the future. BPF_TRACE_FENTRY programs have access to raw kernel function arguments while BPF_TRACE_FEXIT programs have access to kernel return value as well. Often kprobe BPF program remembers function arguments in a map while kretprobe fetches arguments from a map and analyzes them together with return value. BPF_TRACE_FEXIT accelerates this typical use case. Recursion prevention for kprobe BPF programs is done via per-cpu bpf_prog_active counter. In practice that turned out to be a mistake. It caused programs to randomly skip execution. The tracing tools missed results they were looking for. Hence BPF trampoline doesn't provide builtin recursion prevention. It's a job of BPF program itself and will be addressed in the follow up patches. BPF trampoline is intended to be used beyond tracing and fentry/fexit use cases in the future. For example to remove retpoline cost from XDP programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191114185720.1641606-5-ast@kernel.org |
|
|
Zhiping du
|
e515816537 |
bpf: Support doubleword alignment in bpf_jit_binary_alloc
[upstream commit b7b3fc8dd95bc02bd30680da258e09dda55270db] Currently passing alignment greater than 4 to bpf_jit_binary_alloc does not work: in such cases it silently aligns only to 4 bytes. On s390, in order to load a constant from memory in a large (>512k) BPF program, one must use lgrl instruction, whose memory operand must be aligned on an 8-byte boundary. This patch makes it possible to request 8-byte alignment from bpf_jit_binary_alloc, and also makes it issue a warning when an unsupported alignment is requested. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191115123722.58462-1-iii@linux.ibm.com |
|
|
Zhiping du
|
412c87e3ca |
bpf: Replace prog_raw_tp+btf_id with prog_tracing
[upstream commit f1b9509c2fb0ef4db8d22dac9aef8e856a5d81f6] The bpf program type raw_tp together with 'expected_attach_type' was the most appropriate api to indicate BTF-enabled raw_tp programs. But during development it became apparent that 'expected_attach_type' cannot be used and new 'attach_btf_id' field had to be introduced. Which means that the information is duplicated in two fields where one of them is ignored. Clean it up by introducing new program type where both 'expected_attach_type' and 'attach_btf_id' fields have specific meaning. In the future 'expected_attach_type' will be extended with other attach points that have similar semantics to raw_tp. This patch is replacing BTF-enabled BPF_PROG_TYPE_RAW_TRACEPOINT with prog_type = BPF_RPOG_TYPE_TRACING expected_attach_type = BPF_TRACE_RAW_TP attach_btf_id = btf_id of raw tracepoint inside the kernel Future patches will add expected_attach_type = BPF_TRACE_FENTRY or BPF_TRACE_FEXIT where programs have the same input context and the same helpers, but different attach points. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191030223212.953010-2-ast@kernel.org |
|
|
Martin KaFai Lau
|
9f04ec87d9 |
bpf: Prepare btf_ctx_access for non raw_tp use case
This patch makes a few changes to btf_ctx_access() to prepare it for non raw_tp use case where the attach_btf_id is not necessary a BTF_KIND_TYPEDEF. It moves the "btf_trace_" prefix check and typedef-follow logic to a new function "check_attach_btf_id()" which is called only once during bpf_check(). btf_ctx_access() only operates on a BTF_KIND_FUNC_PROTO type now. That should also be more efficient since it is done only one instead of every-time check_ctx_access() is called. "check_attach_btf_id()" needs to find the func_proto type from the attach_btf_id. It needs to store the result into the newly added prog->aux->attach_func_proto. func_proto btf type has no name, so a proper name should be stored into "attach_func_name" also. v2: - Move the "btf_trace_" check to an earlier verifier phase (Alexei) Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191025001811.1718491-1-kafai@fb.com |
|
|
Zhiping du
|
6ff62e4f9a |
bpf: Check types of arguments passed into helpers
[upstream commit a7658e1a4164ce2b9eb4a11aadbba38586e93bd6] Introduce new helper that reuses existing skb perf_event output implementation, but can be called from raw_tracepoint programs that receive 'struct sk_buff *' as tracepoint argument or can walk other kernel data structures to skb pointer. In order to do that teach verifier to resolve true C types of bpf helpers into in-kernel BTF ids. The type of kernel pointer passed by raw tracepoint into bpf program will be tracked by the verifier all the way until it's passed into helper function. For example: kfree_skb() kernel function calls trace_kfree_skb(skb, loc); bpf programs receives that skb pointer and may eventually pass it into bpf_skb_output() bpf helper which in-kernel is implemented via bpf_skb_event_output() kernel function. Its first argument in the kernel is 'struct sk_buff *'. The verifier makes sure that types match all the way. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-11-ast@kernel.org |
|
|
Zhiping du
|
3321ca2f81 |
bpf: Add support for BTF pointers to x86 JIT
[upstream commit 3dec541b2e632d630fe7142ed44f0b3702ef1f8c] Pointer to BTF object is a pointer to kernel object or NULL. Such pointers can only be used by BPF_LDX instructions. The verifier changed their opcode from LDX|MEM|size to LDX|PROBE_MEM|size to make JITing easier. The number of entries in extable is the number of BPF_LDX insns that access kernel memory via "pointer to BTF type". Only these load instructions can fault. Since x86 extable is relative it has to be allocated in the same memory region as JITed code. Allocate it prior to last pass of JITing and let the last pass populate it. Pointer to extable in bpf_prog_aux is necessary to make page fault handling fast. Page fault handling is done in two steps: 1. bpf_prog_kallsyms_find() finds BPF program that page faulted. It's done by walking rb tree. 2. then extable for given bpf program is binary searched. This process is similar to how page faulting is done for kernel modules. The exception handler skips over faulting x86 instruction and initializes destination register with zero. This mimics exact behavior of bpf_probe_read (when probe_kernel_read faults dest is zeroed). JITs for other architectures can add support in similar way. Until then they will reject unknown opcode and fallback to interpreter. Since extable should be aligned and placed near JITed code make bpf_jit_binary_alloc() return 4 byte aligned image offset, so that extable aligning formula in bpf_int_jit_compile() doesn't need to rely on internal implementation of bpf_jit_binary_alloc(). On x86 gcc defaults to 16-byte alignment for regular kernel functions due to better performance. JITed code may be aligned to 16 in the future, but it will use 4 in the meantime. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-10-ast@kernel.org |
|
|
Zhiping du
|
45906291e5 |
bpf: Add support for BTF pointers to interpreter
[upstream commit 2a02759ef5f8a34792df22b41d5e10658fd7bbd3] Pointer to BTF object is a pointer to kernel object or NULL. The memory access in the interpreter has to be done via probe_kernel_read to avoid page faults. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-9-ast@kernel.org |
|
|
Zhiping du
|
f5eb3b8621 |
bpf: Implement accurate raw_tp context access via BTF
[upstream commit 9e15db66136a14cde3f35691f1d839d950118826] libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org |
|
|
Alexei Starovoitov
|
a9ebfff2c0 |
bpf: Add attach_btf_id attribute to program load
Add attach_btf_id attribute to prog_load command. It's similar to existing expected_attach_type attribute which is used in several cgroup based program types. Unfortunately expected_attach_type is ignored for tracing programs and cannot be reused for new purpose. Hence introduce attach_btf_id to verify bpf programs against given in-kernel BTF type id at load time. It is strictly checked to be valid for raw_tp programs only. In a later patches it will become: btf_id == 0 semantics of existing raw_tp progs. btd_id > 0 raw_tp with BTF and additional type safety. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-5-ast@kernel.org |
|
|
Alexei Starovoitov
|
042dcd9259 |
bpf: Process in-kernel BTF
If in-kernel BTF exists parse it and prepare 'struct btf *btf_vmlinux' for further use by the verifier. In-kernel BTF is trusted just like kallsyms and other build artifacts embedded into vmlinux. Yet run this BTF image through BTF verifier to make sure that it is valid and it wasn't mangled during the build. If in-kernel BTF is incorrect it means either gcc or pahole or kernel are buggy. In such case disallow loading BPF programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-4-ast@kernel.org |
|
|
Daniel Borkmann
|
283179a1ba |
bpf: Fix pointer arithmetic mask tightening under state pruning
commit e042aa532c84d18ff13291d00620502ce7a38dda upstream.
In 7fedb63a8307 ("bpf: Tighten speculative pointer arithmetic mask") we
narrowed the offset mask for unprivileged pointer arithmetic in order to
mitigate a corner case where in the speculative domain it is possible to
advance, for example, the map value pointer by up to value_size-1 out-of-
bounds in order to leak kernel memory via side-channel to user space.
The verifier's state pruning for scalars leaves one corner case open
where in the first verification path R_x holds an unknown scalar with an
aux->alu_limit of e.g. 7, and in a second verification path that same
register R_x, here denoted as R_x', holds an unknown scalar which has
tighter bounds and would thus satisfy range_within(R_x, R_x') as well as
tnum_in(R_x, R_x') for state pruning, yielding an aux->alu_limit of 3:
Given the second path fits the register constraints for pruning, the final
generated mask from aux->alu_limit will remain at 7. While technically
not wrong for the non-speculative domain, it would however be possible
to craft similar cases where the mask would be too wide as in 7fedb63a8307.
One way to fix it is to detect the presence of unknown scalar map pointer
arithmetic and force a deeper search on unknown scalars to ensure that
we do not run into a masking mismatch.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[OP: adjusted context in include/linux/bpf_verifier.h for 5.4]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
Lorenz Bauer
|
6daf74f2e9 |
bpf: verifier: Allocate idmap scratch in verifier env
commit c9e73e3d2b1eb1ea7ff068e05007eec3bd8ef1c9 upstream. func_states_equal makes a very short lived allocation for idmap, probably because it's too large to fit on the stack. However the function is called quite often, leading to a lot of alloc / free churn. Replace the temporary allocation with dedicated scratch space in struct bpf_verifier_env. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/bpf/20210429134656.122225-4-lmb@cloudflare.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [OP: adjusted context for 5.4] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Daniel Borkmann
|
75a3818d57 |
bpf: Fix leakage due to insufficient speculative store bypass mitigation
commit 2039f26f3aca5b0e419b98f65dd36481337b86ee upstream.
Spectre v4 gadgets make use of memory disambiguation, which is a set of
techniques that execute memory access instructions, that is, loads and
stores, out of program order; Intel's optimization manual, section 2.4.4.5:
A load instruction micro-op may depend on a preceding store. Many
microarchitectures block loads until all preceding store addresses are
known. The memory disambiguator predicts which loads will not depend on
any previous stores. When the disambiguator predicts that a load does
not have such a dependency, the load takes its data from the L1 data
cache. Eventually, the prediction is verified. If an actual conflict is
detected, the load and all succeeding instructions are re-executed.
af86ca4e3088 ("bpf: Prevent memory disambiguation attack") tried to mitigate
this attack by sanitizing the memory locations through preemptive "fast"
(low latency) stores of zero prior to the actual "slow" (high latency) store
of a pointer value such that upon dependency misprediction the CPU then
speculatively executes the load of the pointer value and retrieves the zero
value instead of the attacker controlled scalar value previously stored at
that location, meaning, subsequent access in the speculative domain is then
redirected to the "zero page".
The sanitized preemptive store of zero prior to the actual "slow" store is
done through a simple ST instruction based on r10 (frame pointer) with
relative offset to the stack location that the verifier has been tracking
on the original used register for STX, which does not have to be r10. Thus,
there are no memory dependencies for this store, since it's only using r10
and immediate constant of zero; hence af86ca4e3088 /assumed/ a low latency
operation.
However, a recent attack demonstrated that this mitigation is not sufficient
since the preemptive store of zero could also be turned into a "slow" store
and is thus bypassed as well:
[...]
// r2 = oob address (e.g. scalar)
// r7 = pointer to map value
31: (7b) *(u64 *)(r10 -16) = r2
// r9 will remain "fast" register, r10 will become "slow" register below
32: (bf) r9 = r10
// JIT maps BPF reg to x86 reg:
// r9 -> r15 (callee saved)
// r10 -> rbp
// train store forward prediction to break dependency link between both r9
// and r10 by evicting them from the predictor's LRU table.
33: (61) r0 = *(u32 *)(r7 +24576)
34: (63) *(u32 *)(r7 +29696) = r0
35: (61) r0 = *(u32 *)(r7 +24580)
36: (63) *(u32 *)(r7 +29700) = r0
37: (61) r0 = *(u32 *)(r7 +24584)
38: (63) *(u32 *)(r7 +29704) = r0
39: (61) r0 = *(u32 *)(r7 +24588)
40: (63) *(u32 *)(r7 +29708) = r0
[...]
543: (61) r0 = *(u32 *)(r7 +25596)
544: (63) *(u32 *)(r7 +30716) = r0
// prepare call to bpf_ringbuf_output() helper. the latter will cause rbp
// to spill to stack memory while r13/r14/r15 (all callee saved regs) remain
// in hardware registers. rbp becomes slow due to push/pop latency. below is
// disasm of bpf_ringbuf_output() helper for better visual context:
//
// ffffffff8117ee20: 41 54 push r12
// ffffffff8117ee22: 55 push rbp
// ffffffff8117ee23: 53 push rbx
// ffffffff8117ee24: 48 f7 c1 fc ff ff ff test rcx,0xfffffffffffffffc
// ffffffff8117ee2b: 0f 85 af 00 00 00 jne ffffffff8117eee0 <-- jump taken
// [...]
// ffffffff8117eee0: 49 c7 c4 ea ff ff ff mov r12,0xffffffffffffffea
// ffffffff8117eee7: 5b pop rbx
// ffffffff8117eee8: 5d pop rbp
// ffffffff8117eee9: 4c 89 e0 mov rax,r12
// ffffffff8117eeec: 41 5c pop r12
// ffffffff8117eeee: c3 ret
545: (18) r1 = map[id:4]
547: (bf) r2 = r7
548: (b7) r3 = 0
549: (b7) r4 = 4
550: (85) call bpf_ringbuf_output#194288
// instruction 551 inserted by verifier \
551: (7a) *(u64 *)(r10 -16) = 0 | /both/ are now slow stores here
// storing map value pointer r7 at fp-16 | since value of r10 is "slow".
552: (7b) *(u64 *)(r10 -16) = r7 /
// following "fast" read to the same memory location, but due to dependency
// misprediction it will speculatively execute before insn 551/552 completes.
553: (79) r2 = *(u64 *)(r9 -16)
// in speculative domain contains attacker controlled r2. in non-speculative
// domain this contains r7, and thus accesses r7 +0 below.
554: (71) r3 = *(u8 *)(r2 +0)
// leak r3
As can be seen, the current speculative store bypass mitigation which the
verifier inserts at line 551 is insufficient since /both/, the write of
the zero sanitation as well as the map value pointer are a high latency
instruction due to prior memory access via push/pop of r10 (rbp) in contrast
to the low latency read in line 553 as r9 (r15) which stays in hardware
registers. Thus, architecturally, fp-16 is r7, however, microarchitecturally,
fp-16 can still be r2.
Initial thoughts to address this issue was to track spilled pointer loads
from stack and enforce their load via LDX through r10 as well so that /both/
the preemptive store of zero /as well as/ the load use the /same/ register
such that a dependency is created between the store and load. However, this
option is not sufficient either since it can be bypassed as well under
speculation. An updated attack with pointer spill/fills now _all_ based on
r10 would look as follows:
[...]
// r2 = oob address (e.g. scalar)
// r7 = pointer to map value
[...]
// longer store forward prediction training sequence than before.
2062: (61) r0 = *(u32 *)(r7 +25588)
2063: (63) *(u32 *)(r7 +30708) = r0
2064: (61) r0 = *(u32 *)(r7 +25592)
2065: (63) *(u32 *)(r7 +30712) = r0
2066: (61) r0 = *(u32 *)(r7 +25596)
2067: (63) *(u32 *)(r7 +30716) = r0
// store the speculative load address (scalar) this time after the store
// forward prediction training.
2068: (7b) *(u64 *)(r10 -16) = r2
// preoccupy the CPU store port by running sequence of dummy stores.
2069: (63) *(u32 *)(r7 +29696) = r0
2070: (63) *(u32 *)(r7 +29700) = r0
2071: (63) *(u32 *)(r7 +29704) = r0
2072: (63) *(u32 *)(r7 +29708) = r0
2073: (63) *(u32 *)(r7 +29712) = r0
2074: (63) *(u32 *)(r7 +29716) = r0
2075: (63) *(u32 *)(r7 +29720) = r0
2076: (63) *(u32 *)(r7 +29724) = r0
2077: (63) *(u32 *)(r7 +29728) = r0
2078: (63) *(u32 *)(r7 +29732) = r0
2079: (63) *(u32 *)(r7 +29736) = r0
2080: (63) *(u32 *)(r7 +29740) = r0
2081: (63) *(u32 *)(r7 +29744) = r0
2082: (63) *(u32 *)(r7 +29748) = r0
2083: (63) *(u32 *)(r7 +29752) = r0
2084: (63) *(u32 *)(r7 +29756) = r0
2085: (63) *(u32 *)(r7 +29760) = r0
2086: (63) *(u32 *)(r7 +29764) = r0
2087: (63) *(u32 *)(r7 +29768) = r0
2088: (63) *(u32 *)(r7 +29772) = r0
2089: (63) *(u32 *)(r7 +29776) = r0
2090: (63) *(u32 *)(r7 +29780) = r0
2091: (63) *(u32 *)(r7 +29784) = r0
2092: (63) *(u32 *)(r7 +29788) = r0
2093: (63) *(u32 *)(r7 +29792) = r0
2094: (63) *(u32 *)(r7 +29796) = r0
2095: (63) *(u32 *)(r7 +29800) = r0
2096: (63) *(u32 *)(r7 +29804) = r0
2097: (63) *(u32 *)(r7 +29808) = r0
2098: (63) *(u32 *)(r7 +29812) = r0
// overwrite scalar with dummy pointer; same as before, also including the
// sanitation store with 0 from the current mitigation by the verifier.
2099: (7a) *(u64 *)(r10 -16) = 0 | /both/ are now slow stores here
2100: (7b) *(u64 *)(r10 -16) = r7 | since store unit is still busy.
// load from stack intended to bypass stores.
2101: (79) r2 = *(u64 *)(r10 -16)
2102: (71) r3 = *(u8 *)(r2 +0)
// leak r3
[...]
Looking at the CPU microarchitecture, the scheduler might issue loads (such
as seen in line 2101) before stores (line 2099,2100) because the load execution
units become available while the store execution unit is still busy with the
sequence of dummy stores (line 2069-2098). And so the load may use the prior
stored scalar from r2 at address r10 -16 for speculation. The updated attack
may work less reliable on CPU microarchitectures where loads and stores share
execution resources.
This concludes that the sanitizing with zero stores from af86ca4e3088 ("bpf:
Prevent memory disambiguation attack") is insufficient. Moreover, the detection
of stack reuse from af86ca4e3088 where previously data (STACK_MISC) has been
written to a given stack slot where a pointer value is now to be stored does
not have sufficient coverage as precondition for the mitigation either; for
several reasons outlined as follows:
1) Stack content from prior program runs could still be preserved and is
therefore not "random", best example is to split a speculative store
bypass attack between tail calls, program A would prepare and store the
oob address at a given stack slot and then tail call into program B which
does the "slow" store of a pointer to the stack with subsequent "fast"
read. From program B PoV such stack slot type is STACK_INVALID, and
therefore also must be subject to mitigation.
2) The STACK_SPILL must not be coupled to register_is_const(&stack->spilled_ptr)
condition, for example, the previous content of that memory location could
also be a pointer to map or map value. Without the fix, a speculative
store bypass is not mitigated in such precondition and can then lead to
a type confusion in the speculative domain leaking kernel memory near
these pointer types.
While brainstorming on various alternative mitigation possibilities, we also
stumbled upon a retrospective from Chrome developers [0]:
[...] For variant 4, we implemented a mitigation to zero the unused memory
of the heap prior to allocation, which cost about 1% when done concurrently
and 4% for scavenging. Variant 4 defeats everything we could think of. We
explored more mitigations for variant 4 but the threat proved to be more
pervasive and dangerous than we anticipated. For example, stack slots used
by the register allocator in the optimizing compiler could be subject to
type confusion, leading to pointer crafting. Mitigating type confusion for
stack slots alone would have required a complete redesign of the backend of
the optimizing compiler, perhaps man years of work, without a guarantee of
completeness. [...]
>From BPF side, the problem space is reduced, however, options are rather
limited. One idea that has been explored was to xor-obfuscate pointer spills
to the BPF stack:
[...]
// preoccupy the CPU store port by running sequence of dummy stores.
[...]
2106: (63) *(u32 *)(r7 +29796) = r0
2107: (63) *(u32 *)(r7 +29800) = r0
2108: (63) *(u32 *)(r7 +29804) = r0
2109: (63) *(u32 *)(r7 +29808) = r0
2110: (63) *(u32 *)(r7 +29812) = r0
// overwrite scalar with dummy pointer; xored with random 'secret' value
// of 943576462 before store ...
2111: (b4) w11 = 943576462
2112: (af) r11 ^= r7
2113: (7b) *(u64 *)(r10 -16) = r11
2114: (79) r11 = *(u64 *)(r10 -16)
2115: (b4) w2 = 943576462
2116: (af) r2 ^= r11
// ... and restored with the same 'secret' value with the help of AX reg.
2117: (71) r3 = *(u8 *)(r2 +0)
[...]
While the above would not prevent speculation, it would make data leakage
infeasible by directing it to random locations. In order to be effective
and prevent type confusion under speculation, such random secret would have
to be regenerated for each store. The additional complexity involved for a
tracking mechanism that prevents jumps such that restoring spilled pointers
would not get corrupted is not worth the gain for unprivileged. Hence, the
fix in here eventually opted for emitting a non-public BPF_ST | BPF_NOSPEC
instruction which the x86 JIT translates into a lfence opcode. Inserting the
latter in between the store and load instruction is one of the mitigations
options [1]. The x86 instruction manual notes:
[...] An LFENCE that follows an instruction that stores to memory might
complete before the data being stored have become globally visible. [...]
The latter meaning that the preceding store instruction finished execution
and the store is at minimum guaranteed to be in the CPU's store queue, but
it's not guaranteed to be in that CPU's L1 cache at that point (globally
visible). The latter would only be guaranteed via sfence. So the load which
is guaranteed to execute after the lfence for that local CPU would have to
rely on store-to-load forwarding. [2], in section 2.3 on store buffers says:
[...] For every store operation that is added to the ROB, an entry is
allocated in the store buffer. This entry requires both the virtual and
physical address of the target. Only if there is no free entry in the store
buffer, the frontend stalls until there is an empty slot available in the
store buffer again. Otherwise, the CPU can immediately continue adding
subsequent instructions to the ROB and execute them out of order. On Intel
CPUs, the store buffer has up to 56 entries. [...]
One small upside on the fix is that it lifts constraints from af86ca4e3088
where the sanitize_stack_off relative to r10 must be the same when coming
from different paths. The BPF_ST | BPF_NOSPEC gets emitted after a BPF_STX
or BPF_ST instruction. This happens either when we store a pointer or data
value to the BPF stack for the first time, or upon later pointer spills.
The former needs to be enforced since otherwise stale stack data could be
leaked under speculation as outlined earlier. For non-x86 JITs the BPF_ST |
BPF_NOSPEC mapping is currently optimized away, but others could emit a
speculation barrier as well if necessary. For real-world unprivileged
programs e.g. generated by LLVM, pointer spill/fill is only generated upon
register pressure and LLVM only tries to do that for pointers which are not
used often. The program main impact will be the initial BPF_ST | BPF_NOSPEC
sanitation for the STACK_INVALID case when the first write to a stack slot
occurs e.g. upon map lookup. In future we might refine ways to mitigate
the latter cost.
[0] https://arxiv.org/pdf/1902.05178.pdf
[1] https://msrc-blog.microsoft.com/2018/05/21/analysis-and-mitigation-of-speculative-store-bypass-cve-2018-3639/
[2] https://arxiv.org/pdf/1905.05725.pdf
Fixes: af86ca4e3088 ("bpf: Prevent memory disambiguation attack")
Fixes: f7cf25b2026d ("bpf: track spill/fill of constants")
Co-developed-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Benedict Schlueter <benedict.schlueter@rub.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Benedict Schlueter <benedict.schlueter@rub.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[OP: - apply check_stack_write_fixed_off() changes in check_stack_write()
- replace env->bypass_spec_v4 -> env->allow_ptr_leaks]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
Daniel Borkmann
|
21a71e1146 |
bpf: Introduce BPF nospec instruction for mitigating Spectre v4
commit f5e81d1117501546b7be050c5fbafa6efd2c722c upstream.
In case of JITs, each of the JIT backends compiles the BPF nospec instruction
/either/ to a machine instruction which emits a speculation barrier /or/ to
/no/ machine instruction in case the underlying architecture is not affected
by Speculative Store Bypass or has different mitigations in place already.
This covers both x86 and (implicitly) arm64: In case of x86, we use 'lfence'
instruction for mitigation. In case of arm64, we rely on the firmware mitigation
as controlled via the ssbd kernel parameter. Whenever the mitigation is enabled,
it works for all of the kernel code with no need to provide any additional
instructions here (hence only comment in arm64 JIT). Other archs can follow
as needed. The BPF nospec instruction is specifically targeting Spectre v4
since i) we don't use a serialization barrier for the Spectre v1 case, and
ii) mitigation instructions for v1 and v4 might be different on some archs.
The BPF nospec is required for a future commit, where the BPF verifier does
annotate intermediate BPF programs with speculation barriers.
Co-developed-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Benedict Schlueter <benedict.schlueter@rub.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Benedict Schlueter <benedict.schlueter@rub.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[OP: - adjusted context for 5.4
- apply riscv changes to /arch/riscv/net/bpf_jit_comp.c]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
Menglong Dong
|
bd1403b101 |
net: skb: introduce __skb_queue_purge_reason()
Introduce __skb_queue_purge_reason() to empty a skb list with drop reason and make __skb_queue_purge() an inline call to it. Reviewed-by: Jiang Biao <benbjiang@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: Menglong Dong <imagedong@tencent.com> |
|
|
Menglong Dong
|
19fc64385e |
net: skb: move enum skb_drop_reason to standalone header file
As the skb drop reasons are getting more and more, move the enum 'skb_drop_reason' and related function to the standalone header 'dropreason.h', as Jakub Kicinski suggested. Signed-off-by: Menglong Dong <imagedong@tencent.com> |
|
|
Menglong Dong
|
66ede92e1c |
tcp: add drop reason support to tcp_ofo_queue()
[upstream commit 8fbf195798b56e1e87f62d01be636a6425c304c2] packets in OFO queue might be redundant, and dropped. tcp_drop() is no longer needed. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Menglong Dong
|
5c6caf8ba0 |
tcp: add drop reason support to tcp_prune_ofo_queue()
[upstream commit e7c89ae4078eab24af71ba26b91642e819a4bd7f] Add one reason for packets dropped from OFO queue because of memory pressure. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Menglong Dong
|
8c18d12403 |
tcp: add two drop reasons for tcp_ack()
[upstream commit 4b506af9c5b8de0da34097d50d9448dfb33d70c3] Add TCP_TOO_OLD_ACK and TCP_ACK_UNSENT_DATA drop reasons so that tcp_rcv_established() can report them. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Menglong Dong
|
4173b6203c |
tcp: add drop reasons to tcp_rcv_state_process()
[upstream commit 669da7a71890b2b2a31a7e9571c0fdf1123e26ef] Add basic support for drop reasons in tcp_rcv_state_process() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Menglong Dong
|
0a54b767a1 |
tcp: add drop reason support to tcp_validate_incoming()
[upstream commit da40b613f89c43c58986e6f30560ad6573a4d569] Creates four new drop reasons for the following cases: 1) packet being rejected by RFC 7323 PAWS check 2) packet being rejected by SEQUENCE check 3) Invalid RST packet 4) Invalid SYN packet Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Menglong Dong
|
5e1ee4e3b3 |
net: skb: change the definition SKB_DR_SET()
[upstream commit 7ebd3f3ee51a9e02994cd0a1be44fbd325d1e0dc] The SKB_DR_OR() is used to set the drop reason to a value when it is not set or specified yet. SKB_NOT_DROPPED_YET should also be considered as not set. Reviewed-by: Jiang Biao <benbjiang@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Menglong Dong
|
4fc2182cfa |
net: icmp: introduce function icmpv6_param_prob_reason()
[upstream commit 1ad6d548e2a452f21bcee4606ee4ec7afcde5f37] In order to add the skb drop reasons support to icmpv6_param_prob(), introduce the function icmpv6_param_prob_reason() and make icmpv6_param_prob() an inline call to it. This new function will be used in the following patches. Signed-off-by: Menglong Dong <imagedong@tencent.com> Reviewed-by: Jiang Biao <benbjiang@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Menglong Dong
|
4ad7c174b5 |
net: ip: add skb drop reasons to ip forwarding
[upstream commit 2edc1a383fda8d2f580216292dfd9daeae691e47] Replace kfree_skb() which is used in ip6_forward() and ip_forward() with kfree_skb_reason(). The new drop reason 'SKB_DROP_REASON_PKT_TOO_BIG' is introduced for the case that the length of the packet exceeds MTU and can't fragment. Signed-off-by: Menglong Dong <imagedong@tencent.com> Reviewed-by: Jiang Biao <benbjiang@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net> |