[ Upstream commit b30d0040f06159de97ad9c0b1536f47250719d7d ]
Iff platform_get_irq() returns 0, ahci_platform_init_host() would return 0
early (as if the call was successful). Override IRQ0 with -EINVAL instead
as the 'libata' regards 0 as "no IRQ" (thus polling) anyway...
Fixes: c034640a32f8 ("ata: libahci: properly propagate return value of platform_get_irq()")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/4448c8cc-331f-2915-0e17-38ea34e251c8@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6471a65fdd5efbb8dd2732dd0f063f960685ceb ]
The function mv_platform_probe() neglects to check the results of the
calls to platform_get_irq() and irq_of_parse_and_map() and blithely
passes them to ata_host_activate() -- while the latter only checks
for IRQ0 (treating it as a polling mode indicattion) and passes the
negative values to devm_request_irq() causing it to fail as it takes
unsigned values for the IRQ #...
Add to mv_platform_probe() the proper IRQ checks to pass the positive IRQ
#s to ata_host_activate(), propagate upstream the negative error codes,
and override the IRQ0 with -EINVAL (as we don't want the polling mode).
Fixes: f351b2d638c3 ("sata_mv: Support SoC controllers")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/51436f00-27a1-e20b-c21b-0e817e0a7c86@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e379b40cc0f179403ce0b82b7e539f635a568da5 ]
The driver's probe() method is written as if platform_get_irq() returns 0
on error, while actually it returns a negative error code (with all the
other values considered valid IRQs). Rewrite the driver's IRQ checking
code to pass the positive IRQ #s to ata_host_activate(), propagate errors
upstream, and treat IRQ0 as error, returning -EINVAL, as the libata code
treats 0 as an indication that polling should be used anyway...
Fixes: 0df0d0a0ea9f ("[libata] ARM: add ixp4xx PATA driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7e8f404d56b99c80990b19a402c3f640d74be05 ]
The driver's probe() method is written as if platform_get_irq() returns 0
on error, while actually it returns a negative error code (with all the
other values considered valid IRQs). Rewrite the driver's IRQ checking code
to pass the positive IRQ #s to ata_host_activate(), propagate upstream
-EPROBE_DEFER, and set up the driver to polling mode on (negative) errors
and IRQ0 (libata treats IRQ #0 as a polling mode anyway)...
Fixes: a480167b23ef ("pata_arasan_cf: Adding support for arasan compact flash host controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 234e6d2c18f5b080cde874483c4c361f3ae7cffe ]
On Hisilicon Kunpeng920, ESP is set to 1 by default for all ports of
SATA controller. In some scenarios, some ports are not external SATA ports,
and it cause disks connected to these ports to be identified as removable
disks. So disable the SXS capability on the software side to prevent users
from mistakenly considering non-removable disks as removable disks and
performing related operations.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1615544676-61926-1-git-send-email-luojiaxing@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10340f8d7b6dd54e616339c8ccb2f397133ebea0 ]
While reworking the resources management and departing from using
ahci_platform_enable_resources() which did not allow a proper step
separation like we need, we unfortunately lost the ability to control
AHCI regulators. This broke some Broadcom STB systems that do expect
regulators to be turned on to link up with attached hard drives.
Fixes: c0cdf2ac4b5b ("ata: ahci_brcm: Fix AHCI resources management")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e4c309f9f33b76c09daa02b796ef87918eee494 ]
ata_qc_complete_multiple() has to be called with the tags physically
active, that is the hw tag is at bit 0. ap->qc_active has the same tag
at bit ATA_TAG_INTERNAL instead, so call ata_qc_get_active() to fix that
up. This is done in the vein of 8385d756e114 ("libata: Fix retrieving of
active qcs").
Fixes: 28361c403683 ("libata: add extra internal command")
Tested-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit df9c590986fdb6db9d5636d6cd93bc919c01b451 upstream.
Before commit 9495b7e92f716ab2 ("driver core: platform: Initialize
dma_parms for platform devices"), the R-Car SATA device didn't have DMA
parameters. Hence the DMA boundary mask supplied by its driver was
silently ignored, as __scsi_init_queue() doesn't check the return value
of dma_set_seg_boundary(), and the default value of 0xffffffff was used.
Now the device has gained DMA parameters, the driver-supplied value is
used, and the following warning is printed on Salvator-XS:
DMA-API: sata_rcar ee300000.sata: mapping sg segment across boundary [start=0x00000000ffffe000] [end=0x00000000ffffefff] [boundary=0x000000001ffffffe]
WARNING: CPU: 5 PID: 38 at kernel/dma/debug.c:1233 debug_dma_map_sg+0x298/0x300
(the range of start/end values depend on whether IOMMU support is
enabled or not)
The issue here is that SATA_RCAR_DMA_BOUNDARY doesn't have bit 0 set, so
any typical end value, which is odd, will trigger the check.
Fix this by increasing the DMA boundary value by 1.
This also fixes the following WRITE DMA EXT timeout issue:
# dd if=/dev/urandom of=/mnt/de1/file1-1024M bs=1M count=1024
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: failed command: WRITE DMA EXT
ata1.00: cmd 35/00:00:00:e6:0c/00:0a:00:00:00/e0 tag 0 dma 1310720 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
as seen by Shimoda-san since commit 429120f3df2dba2b ("block: fix
splitting segments on boundary masks").
Fixes: 8bfbeed58665dbbf ("sata_rcar: correct 'sata_rcar_sht'")
Fixes: 9495b7e92f716ab2 ("driver core: platform: Initialize dma_parms for platform devices")
Fixes: 429120f3df2dba2b ("block: fix splitting segments on boundary masks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45aefe3d2251e4e229d7662052739f96ad1d08d9 upstream.
Older ATF does not provide SMC call for SATA phy power on functionality and
therefore initialization of ahci_mvebu is failing when older version of ATF
is using. In this case phy_power_on() function returns -EOPNOTSUPP.
This patch adds a new hflag AHCI_HFLAG_IGN_NOTSUPP_POWER_ON which cause
that ahci_platform_enable_phys() would ignore -EOPNOTSUPP errors from
phy_power_on() call.
It fixes initialization of ahci_mvebu on Espressobin boards where is older
Marvell's Arm Trusted Firmware without SMC call for SATA phy power.
This is regression introduced in commit 8e18c8e58da64 ("arm64: dts: marvell:
armada-3720-espressobin: declare SATA PHY property") where SATA phy was
defined and therefore ahci_platform_enable_phys() on Espressobin started
failing.
Fixes: 8e18c8e58da64 ("arm64: dts: marvell: armada-3720-espressobin: declare SATA PHY property")
Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Cc: <stable@vger.kernel.org> # 5.1+: ea17a0f153af: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95364f36701e62dd50eee91e1303187fd1a9f567 upstream.
In case a driver wants to return an error from qc_prep, return enum
ata_completion_errors. sata_mv is one of those drivers -- see the next
patch. Other drivers return the newly defined AC_ERR_OK.
[v2] use enum ata_completion_errors and AC_ERR_OK.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b5455636fe26ea21b4189d135a424a6da016418 upstream.
All three generations of Sandisk SSDs lock up hard intermittently.
Experiments showed that disabling NCQ lowered the failure rate significantly
and the kernel has been disabling NCQ for some models of SD7's and 8's,
which is obviously undesirable.
Karthik worked with Sandisk to root cause the hard lockups to trim commands
larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which
limits max trim size to 128M and applies it to all three generations of
Sandisk SSDs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Karthik Shivaram <karthikgs@fb.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b5292111de9bb70cba3489075970889765302136 ]
Commit 130f4caf145c ("libata: Ensure ata_port probe has completed before
detach") may cause system freeze during suspend.
Using async_synchronize_full() in PM callbacks is wrong, since async
callbacks that are already scheduled may wait for not-yet-scheduled
callbacks, causes a circular dependency.
Instead of using big hammer like async_synchronize_full(), use async
cookie to make sure port probe are synced, without affecting other
scheduled PM callbacks.
Fixes: 130f4caf145c ("libata: Ensure ata_port probe has completed before detach")
Suggested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: John Garry <john.garry@huawei.com>
BugLink: https://bugs.launchpad.net/bugs/1867983
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8305f72f952cff21ce8109dc1ea4b321c8efc5af upstream.
During system resume from suspend, this can be observed on ASM1062 PMP
controller:
ata10.01: SATA link down (SStatus 0 SControl 330)
ata10.02: hard resetting link
ata10.02: SATA link down (SStatus 0 SControl 330)
ata10.00: configured for UDMA/133
Kernel panic - not syncing: stack-protector: Kernel
in: sata_pmp_eh_recover+0xa2b/0xa40
CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE
#49-Ubuntu
Hardware name: System manufacturer System Product
1001 12/10/2017
Call Trace:
dump_stack+0x63/0x8b
panic+0xe4/0x244
? sata_pmp_eh_recover+0xa2b/0xa40
__stack_chk_fail+0x19/0x20
sata_pmp_eh_recover+0xa2b/0xa40
? ahci_do_softreset+0x260/0x260 [libahci]
? ahci_do_hardreset+0x140/0x140 [libahci]
? ata_phys_link_offline+0x60/0x60
? ahci_stop_engine+0xc0/0xc0 [libahci]
sata_pmp_error_handler+0x22/0x30
ahci_error_handler+0x45/0x80 [libahci]
ata_scsi_port_error_handler+0x29b/0x770
? ata_scsi_cmd_error_handler+0x101/0x140
ata_scsi_error+0x95/0xd0
? scsi_try_target_reset+0x90/0x90
scsi_error_handler+0xd0/0x5b0
kthread+0x121/0x140
? scsi_eh_get_sense+0x200/0x200
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x22/0x40
Kernel Offset: 0xcc00000 from 0xffffffff81000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)
Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is
set, sata_pmp_eh_recover() continues to run. During retry it triggers
the stack protector.
Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover()
jump to pmp_fail directly.
BugLink: https://bugs.launchpad.net/bugs/1821434
Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1d72f7aec3595249dbb83291ccac041a2d676c57 ]
If the call to scsi_add_host_with_dma() in ata_scsi_add_hosts() fails,
then we may get use-after-free KASAN warns:
==================================================================
BUG: KASAN: use-after-free in kobject_put+0x24/0x180
Read of size 1 at addr ffff0026b8c80364 by task swapper/0/1
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.6.0-rc3-00004-g5a71b206ea82-dirty #1765
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B160.01 02/24/2020
Call trace:
dump_backtrace+0x0/0x298
show_stack+0x14/0x20
dump_stack+0x118/0x190
print_address_description.isra.9+0x6c/0x3b8
__kasan_report+0x134/0x23c
kasan_report+0xc/0x18
__asan_load1+0x5c/0x68
kobject_put+0x24/0x180
put_device+0x10/0x20
scsi_host_put+0x10/0x18
ata_devres_release+0x74/0xb0
release_nodes+0x2d0/0x470
devres_release_all+0x50/0x78
really_probe+0x2d4/0x560
driver_probe_device+0x7c/0x148
device_driver_attach+0x94/0xa0
__driver_attach+0xa8/0x110
bus_for_each_dev+0xe8/0x158
driver_attach+0x30/0x40
bus_add_driver+0x220/0x2e0
driver_register+0xbc/0x1d0
__pci_register_driver+0xbc/0xd0
ahci_pci_driver_init+0x20/0x28
do_one_initcall+0xf0/0x608
kernel_init_freeable+0x31c/0x384
kernel_init+0x10/0x118
ret_from_fork+0x10/0x18
Allocated by task 5:
save_stack+0x28/0xc8
__kasan_kmalloc.isra.8+0xbc/0xd8
kasan_kmalloc+0xc/0x18
__kmalloc+0x1a8/0x280
scsi_host_alloc+0x44/0x678
ata_scsi_add_hosts+0x74/0x268
ata_host_register+0x228/0x488
ahci_host_activate+0x1c4/0x2a8
ahci_init_one+0xd18/0x1298
local_pci_probe+0x74/0xf0
work_for_cpu_fn+0x2c/0x48
process_one_work+0x488/0xc08
worker_thread+0x330/0x5d0
kthread+0x1c8/0x1d0
ret_from_fork+0x10/0x18
Freed by task 5:
save_stack+0x28/0xc8
__kasan_slab_free+0x118/0x180
kasan_slab_free+0x10/0x18
slab_free_freelist_hook+0xa4/0x1a0
kfree+0xd4/0x3a0
scsi_host_dev_release+0x100/0x148
device_release+0x7c/0xe0
kobject_put+0xb0/0x180
put_device+0x10/0x20
scsi_host_put+0x10/0x18
ata_scsi_add_hosts+0x210/0x268
ata_host_register+0x228/0x488
ahci_host_activate+0x1c4/0x2a8
ahci_init_one+0xd18/0x1298
local_pci_probe+0x74/0xf0
work_for_cpu_fn+0x2c/0x48
process_one_work+0x488/0xc08
worker_thread+0x330/0x5d0
kthread+0x1c8/0x1d0
ret_from_fork+0x10/0x18
There is also refcount issue, as well:
WARNING: CPU: 1 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0xf8/0x170
The issue is that we make an erroneous extra call to scsi_host_put()
for that host:
So in ahci_init_one()->ata_host_alloc_pinfo()->ata_host_alloc(), we setup
a device release method - ata_devres_release() - which intends to release
the SCSI hosts:
static void ata_devres_release(struct device *gendev, void *res)
{
...
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
if (!ap)
continue;
if (ap->scsi_host)
scsi_host_put(ap->scsi_host);
}
...
}
However in the ata_scsi_add_hosts() error path, we also call
scsi_host_put() for the SCSI hosts.
Fix by removing the the scsi_host_put() calls in ata_scsi_add_hosts() and
leave this to ata_devres_release().
Fixes: f31871951b38 ("libata: separate out ata_host_alloc() and ata_host_register()")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Shtylyov