[ Upstream commit e3de1e291fa58a1ab0f471a4b458eff2514e4b5f ]
In commit bf13718bc57a ("powerpc: show registers when unwinding
interrupt frames") we changed our stack dumping logic to show the full
registers whenever we find an interrupt frame on the stack.
However we didn't notice that on 64-bit this doesn't show the final
frame, ie. the interrupt that brought us in from userspace, whereas on
32-bit it does.
That is due to confusion about the size of that last frame. The code
in show_stack() calls validate_sp(), passing it STACK_INT_FRAME_SIZE
to check the sp is at least that far below the top of the stack.
However on 64-bit that size is too large for the final frame, because
it includes the red zone, but we don't allocate a red zone for the
first frame.
So add a new define that encodes the correct size for 32-bit and
64-bit, and use it in show_stack().
This results in the full trace being shown on 64-bit, eg:
sysrq: Trigger a crash
Kernel panic - not syncing: sysrq triggered crash
CPU: 0 PID: 83 Comm: sh Not tainted 5.11.0-rc2-gcc-8.2.0-00188-g571abcb96b10-dirty #649
Call Trace:
[c00000000a1c3ac0] [c000000000897b70] dump_stack+0xc4/0x114 (unreliable)
[c00000000a1c3b00] [c00000000014334c] panic+0x178/0x41c
[c00000000a1c3ba0] [c00000000094e600] sysrq_handle_crash+0x40/0x50
[c00000000a1c3c00] [c00000000094ef98] __handle_sysrq+0xd8/0x210
[c00000000a1c3ca0] [c00000000094f820] write_sysrq_trigger+0x100/0x188
[c00000000a1c3ce0] [c0000000005559dc] proc_reg_write+0x10c/0x1b0
[c00000000a1c3d10] [c000000000479950] vfs_write+0xf0/0x360
[c00000000a1c3d60] [c000000000479d9c] ksys_write+0x7c/0x140
[c00000000a1c3db0] [c00000000002bf5c] system_call_exception+0x19c/0x2c0
[c00000000a1c3e10] [c00000000000d35c] system_call_common+0xec/0x278
--- interrupt: c00 at 0x7fff9fbab428
NIP: 00007fff9fbab428 LR: 000000001000b724 CTR: 0000000000000000
REGS: c00000000a1c3e80 TRAP: 0c00 Not tainted (5.11.0-rc2-gcc-8.2.0-00188-g571abcb96b10-dirty)
MSR: 900000000280f033 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 22002884 XER: 00000000
IRQMASK: 0
GPR00: 0000000000000004 00007fffc3cb8960 00007fff9fc59900 0000000000000001
GPR04: 000000002a4b32d0 0000000000000002 0000000000000063 0000000000000063
GPR08: 000000002a4b32d0 0000000000000000 0000000000000000 0000000000000000
GPR12: 0000000000000000 00007fff9fcca9a0 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 00000000100b8fd0
GPR20: 000000002a4b3485 00000000100b8f90 0000000000000000 0000000000000000
GPR24: 000000002a4b0440 00000000100e77b8 0000000000000020 000000002a4b32d0
GPR28: 0000000000000001 0000000000000002 000000002a4b32d0 0000000000000001
NIP [00007fff9fbab428] 0x7fff9fbab428
LR [000000001000b724] 0x1000b724
--- interrupt: c00
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210209141627.2898485-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6e2c226c3d51fd93636320e47cabc8a8f0824c5 ]
With CONFIG_DEBUG_VIRTUAL=y, we can hit a BUG() if we take a hard
lockup watchdog interrupt when in OPAL mode.
This happens in show_instructions() if the kernel takes the watchdog
NMI IPI, or any other interrupt, with MSR_IR == 0. show_instructions()
updates the variable pc in the loop and the second iteration will
result in BUG().
We hit the BUG_ON due the below check in __va()
#define __va(x)
({
VIRTUAL_BUG_ON((unsigned long)(x) >= PAGE_OFFSET);
(void *)(unsigned long)((phys_addr_t)(x) | PAGE_OFFSET);
})
Fix it by moving the check out of the loop. Also update nip so that
the nip == pc check still matches.
Fixes: 4dd7554a6456 ("powerpc/64: Add VIRTUAL_BUG_ON checks for __va and __pa addresses")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Use IS_ENABLED(), massage change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200524093822.423487-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman